((2R,3R,4R,5R)-3-(benzoyloxy)-4-fluoro-5-hydroxy-4-methyltetrahydrofuran-2-yl)methyl benzoate

反応条件: temp:-17.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

実験手順: Anhydrous dichloromethane (5.6 L) was charged into a reactor and cooled to −22° C. or below. Triphenylphosphine (205.4 g, 0.783 mol) was added to the cold solvent and the suspension was stirred to form a solution. The lactol (8, 209.4 g, 0.559 mol) in solid form was added to the cold solution and stirred for 15 mins. Carbon tetrabromide (278.2 g, 0.839 mol) was added portion-wise while maintaining the temperature of the solution between −22° C. to −20° C. under a flow of nitrogen gas (approx. 30 min). After finishing the addition of CBr4, the temperature was slowly raised to −17° C. over 20 mins. The reaction was judged to be >95% complete by TLC (Rfs 0.61 (α), 0.72 (β), 0.36 lactol; 20% EtOAc in hexanes). The reaction solution was immediately transferred to a vessel containing 230 g of flash chromatography grade silica gel (40-63 microns). The stirred mixture was immediately passed through a pad of silica gel (680 g) in a 2.5 L sintered glass Buchner funnel. The filtrate was concentrated under reduced pressure to about 800 mL and the ratio of α/β isomers of the crude product was 10:1 as determined by 1H-NMR. (CDCl3) δ=6.35, (s, α C1-H), 6.43, (d, β C1-H). The residue was purified by plug column chromatography using 2.1 kg of silica gel in a 6 L sintered glass Buchner funnel and eluted (via suction) with a stepwise gradient elution of 1%, 5%, 8% 12% EtOAc in hexane (ca 4 L each) to remove non-polar impurities followed by 12%, 25% EtOAc in hexane (6 L total) to elute the product. The product containing fractions were combined into two fractions, concentrated under reduced pressure, dried under vacuum (0.1 mmHg, ambient temp., 20 h) to colorless oils. Main fraction (197 g, 89% α/β=20:1). The alpha isomer crystallized from a small portion of the oil upon standing at 0° C. for several weeks to give large, thin plates, mp 59-61° C. The pure beta isomer crystallized from a mixture of alpha and beta product oil from an earlier less selective run to give needles, mp 77-79° C. cooled to −22° C. or below to form a solution stirred for 15 mins while maintaining the temperature of the solution between −22° C. to −20° C. under a flow of nitrogen gas (approx. 30 min) The reaction solution was immediately transferred to a vessel containing 230 g of flash chromatography grade silica gel (40-63 microns) The filtrate was concentrated under reduced pressure to about 800 mL The residue was purified by plug column chromatography eluted (via suction) with a stepwise gradient elution of 1%, 5%, 8% 12% EtOAc in hexane (ca 4 L each) to remove non-polar impurities to elute the product The product containing fractions concentrated under reduced pressure dried under vacuum (0.1 mmHg, ambient temp., 20 h) to colorless oils The alpha isomer crystallized from a small portion of the oil upon standing at 0° C. for several weeks to give large The pure beta isomer crystallized from a mixture of alpha and beta product oil from an earlier less selective run to give needles, mp 77-79° C.

反応条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

実験手順: To a solution of mixture of compound 8 (1.0 g, 2.67 mmol) and PPh3 (1.4 g, 5.34 mmol) in CH2Cl2 (15 mL) was added NCS (1.07 g, 8.01 mmol) portionwise at 0° C. Then the resulting mixture was stirred at rt for 1 h and poured into a silica gel column and eluted with EtOAc-hexanes (1:4) using pressure. The collected right fractions were combined, concentrated, and co-evaporated with CH2Cl2 several times and used next step (1.0 g, 95%). poured into a silica gel column eluted with EtOAc-hexanes (1:4) concentrated

反応条件: temp:-17.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

実験手順: Anhydrous dichloromethane (5.6 L) was charged into a reactor and cooled to −22° C. or below. Triphenylphosphine (205.4 g, 0.783 mol) was added to the cold solvent and the suspension was stirred to form a solution. The lactol (2, 209.4 g, 0.559 mol) in solid form was added to the cold solution and stirred for 15 mins. Carbon tetrabromide (278.2 g, 0.839 mol) was added portion-wise while maintaining the temperature of the solution between −22° C. to −20° C. under a flow of nitrogen gas (approx. 30 min). After finishing the addition of CBr4, the temperature was slowly raised to −17° C. over 20 mins. The reaction was judged to be >95% complete by TLC (Rfs 0.61 (α), 0.72 (β), 0.36 lactol; 20% EtOAc in hexanes). The reaction solution was immediately transferred to a vessel containing 230 g of flash chromatography grade silica gel (40-63 microns). The stirred mixture was immediately passed through a pad of silica gel (680 g) in a 2.5 L sintered glass Buchner funnel. The filtrate was concentrated under reduced pressure to about 800 mL and the ratio of α/β isomers of the crude product was 10:1 as determined by 1H-NMR. (CDCl3) δ=6.35, (s, α C1-H), 6.43, (d, β C1-H). The residue was purified by plug column chromatography using 2.1 kg of silica gel in a 6 L sintered glass Buchner funnel and eluted (via suction) with a stepwise gradient elution of 1%, 5%, 8% 12% EtOAc in hexane (ca 4 L each) to remove non-polar impurities followed by 12%, 25% EtOAc in hexane (6 L total) to elute the product. The product containing fractions were combined into two fractions, concentrated under reduced pressure, dried under vacuum (0.1 mmHg, ambient temp., 20 h) to colorless oils. Main fraction (197 g, 89% α/β=20:1). The alpha isomer crystallized from a small portion of the oil upon standing at 0° C. for several weeks to give large, thin plates, mp 59-61° C. The pure beta isomer crystallized from a mixture of alpha and beta product oil from an earlier less selective run to give needles, mp 77-79° C. cooled to −22° C. or below to form a solution stirred for 15 mins while maintaining the temperature of the solution between −22° C. to −20° C. under a flow of nitrogen gas (approx. 30 min) The reaction solution was immediately transferred to a vessel containing 230 g of flash chromatography grade silica gel (40-63 microns) The filtrate was concentrated under reduced pressure to about 800 mL The residue was purified by plug column chromatography eluted (via suction) with a stepwise gradient elution of 1%, 5%, 8% 12% EtOAc in hexane (ca 4 L each) to remove non-polar impurities to elute the product The product containing fractions concentrated under reduced pressure dried under vacuum (0.1 mmHg, ambient temp., 20 h) to colorless oils The alpha isomer crystallized from a small portion of the oil upon standing at 0° C. for several weeks to give large The pure beta isomer crystallized from a mixture of alpha and beta product oil from an earlier less selective run to give needles, mp 77-79° C.

反応条件: temp:-17.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

実験手順: Anhydrous dichloromethane (5.6 L) was charged into a reactor and cooled to −22° C. or below. Triphenylphosphine (205.4 g, 0.783 mol) was added to the cold solvent and the suspension was stirred to form a solution. The lactol (2, 209.4 g, 0.559 mol) in solid form was added to the cold solution and stirred for 15 mins. Carbon tetrabromide (278.2 g, 0.839 mol) was added portion-wise while maintaining the temperature of the solution between −22° C. to −20° C. under a flow of nitrogen gas (approx. 30 min). After finishing the addition of CBr4, the temperature was slowly raised to −17° C. over 20 mins. The reaction was judged to be >95% complete by TLC (Rfs 0.61 (α), 0.72 (β), 0.36 lactol; 20% EtOAc in hexanes). The reaction solution was immediately transferred to a vessel containing 230 g of flash chromatography grade silica gel (40-63 microns). The stirred mixture was immediately passed through a pad of silica gel (680 g) in a 2.5 L sintered glass Buchner funnel. The filtrate was concentrated under reduced pressure to about 800 mL and the ratio of α/β isomers of the crude product was 10:1 as determined by 1H-NMR. (CDCl3) δ=6.35, (s, α C1-H), 6.43, (d, β C1-H). The residue was purified by plug column chromatography using 2.1 kg of silica gel in a 6 L sintered glass Buchner funnel and eluted (via suction) with a stepwise gradient elution of 1%, 5%, 8% 12% EtOAc in hexane (ca 4 L each) to remove non-polar impurities followed by 12%, 25% EtOAc in hexane (6 L total) to elute the product. The product containing fractions were combined into two fractions, concentrated under reduced pressure, dried under vacuum (0.1 mmHg, ambient temp., 20 h) to colorless oils. Main fraction (197 g, 89% α/β=20:1). The alpha isomer crystallized from a small portion of the oil upon standing at 0° C. for several weeks to give large, thin plates, mp 59-61° C. The pure beta isomer crystallized from a mixture of alpha and beta product oil from an earlier less selective run to give needles, mp 77-79° C. cooled to −22° C. or below to form a solution stirred for 15 mins while maintaining the temperature of the solution between −22° C. to −20° C. under a flow of nitrogen gas (approx. 30 min) The reaction solution was immediately transferred to a vessel containing 230 g of flash chromatography grade silica gel (40-63 microns) The filtrate was concentrated under reduced pressure to about 800 mL The residue was purified by plug column chromatography eluted (via suction) with a stepwise gradient elution of 1%, 5%, 8% 12% EtOAc in hexane (ca 4 L each) to remove non-polar impurities to elute the product The product containing fractions concentrated under reduced pressure dried under vacuum (0.1 mmHg, ambient temp., 20 h) to colorless oils The alpha isomer crystallized from a small portion of the oil upon standing at 0° C. for several weeks to give large The pure beta isomer crystallized from a mixture of alpha and beta product oil from an earlier less selective run to give needles, mp 77-79° C.

反応条件: temp:-17.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

実験手順: Anhydrous dichloromethane (5.6 L) was charged into a reactor and cooled to −22° C. or below. Triphenylphosphine (205.4 g, 0.783 mol) was added to the cold solvent and the suspension was stirred to form a solution. The lactol (2a, 209.4 g, 0.559 mol) in solid form was added to the cold solution and stirred for 15 mins. Carbon tetrabromide (278.2 g, 0.839 mol) was added portion-wise while maintaining the temperature of the solution between −22° C. to −20° C. under a flow of nitrogen gas (approx. 30 min). After finishing the addition of CBr4, the temperature was slowly raised to −17° C. over 20 mins. The reaction was judged to be >95% complete by TLC(Rfs 0.61 (α), 0.72 (β), 0.36 lactol; 20% EtOAc in hexanes). The reaction solution was immediately transferred to a vessel containing 230 g of flash chromatography grade silica gel (40-63 microns). The stirred mixture was immediately passed through a pad of silica gel (680 g) in a 2.5 L sintered glass Buchner funnel. The filtrate was concentrated under reduced pressure to about 800 mL and the ratio of α/β isomers of the crude product was 10:1 as determined by 1H-NMR. (CDCl3) δ=6.35, (s, α C1-H), 6.43, (d, β C1-H). The residue was purified by plug column chromatography using 2.1 kg of silica gel in a 6 L sintered glass Buchner funnel and eluted (via suction) with a stepwise gradient elution of 1%, 5%, 8% 12% EtOAc in hexane (ca 4 L each) to remove non-polar impurities followed by 12%, 25% EtOAc in hexane (6 L total) to elute the product. The product containing fractions were combined into two fractions, concentrated under reduced pressure, dried under vacuum (0.1 mmHg, ambient temp., 20 h) to colorless oils. Main fraction (197 g, 89% α/β=20:1). The alpha isomer crystallized from a small portion of the oil upon standing at 0° C. for several weeks to give large, thin plates, mp 59-61° C. The pure beta isomer crystallized from a mixture of alpha and beta product oil from an earlier less selective run to give needles, mp 77-79° C. cooled to −22° C. or below to form a solution stirred for 15 mins while maintaining the temperature of the solution between −22° C. to −20° C. under a flow of nitrogen gas (approx. 30 min) The reaction solution was immediately transferred to a vessel containing 230 g of flash chromatography grade silica gel (40-63 microns) The filtrate was concentrated under reduced pressure to about 800 mL The residue was purified by plug column chromatography eluted (via suction) with a stepwise gradient elution of 1%, 5%, 8% 12% EtOAc in hexane (ca 4 L each) to remove non-polar impurities to elute the product The product containing fractions concentrated under reduced pressure dried under vacuum (0.1 mmHg, ambient temp., 20 h) to colorless oils The alpha isomer crystallized from a small portion of the oil upon standing at 0° C. for several weeks to give large The pure beta isomer crystallized from a mixture of alpha and beta product oil from an earlier less selective run to give needles, mp 77-79° C.

反応条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

実験手順: To a solution of mixture of compound 2a (1.0 g, 2.67 mmol) and PPh3 (1.4 g, 5.34 mmol) in CH2Cl2 (15 mL) was added NCS (1.07 g, 8.01 mmol) portionwise at 0° C. Then the resulting mixture was stirred at rt for 1 h and poured into a silica gel column and eluted with EtOAc-hexanes (1:4) using pressure. The collected right fractions were combined, concentrated, and co-evaporated with CH2Cl2 several times and used next step (1.0 g, 95%). poured into a silica gel column eluted with EtOAc-hexanes (1:4) concentrated

反応条件: temp:-30.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

実験手順: To a 5 L of dry three-neck round-bottomed flask fit with a mechanical stirrer, addition funnel and thermometer was charged the lactone ((2R,3R,4R)-3-(benzoyloxy)-4-fluoro-4-methyl-5-oxotetrahydrofuran-2-yl)methyl benzoate) (1a, 379 g, 1.018 mol). The solid was dissolved in anhydrous THF (1.75 L) and cooled to −30° C. under a nitrogen atmosphere. A solution of lithium tri-tert-butoxyaluminohydride (1.0 M in THF, 1.527 L) was added to the lactone solution while stirring over 1 h and maintaining the −30° C. temperature. After finishing the addition, the temperature was slowly increased and the reaction was followed by TLC (lactol Rf 0.4, 30% EtOAc in hexanes). The reaction was complete after 1 h 15 min (temperature reached −10° C.). The reaction was quenched by addition of Ethyl acetate (900 mL) via addition funnel. Sat. NH4Cl (40 mL) was added at 0° C. The cloudy mixture was decanted into a 10 L round-bottomed flask. The solid residue left behind was filtered and washed with ethyl acetate (2×200 mL). The filtrate was combined with the decanted solution and the combined solution was concentrated under reduced pressure. The oily residue was dissolved in ethyl acetate (2 L) and washed with 3 N HCl (600 mL). The aqueous layer was back-extracted with ethyl acetate (3×400 mL). The combined organic layer was washed with water (3×800 mL), sat. NaHCO3 (400 mL) and brine (400 mL). The organic solution was dried over MgSO4, filtered and concentrated under reduced pressure to afford a light brown oily residue. The residue was purified by plug column (2.2 kg of 40-63 micron silica gel, packed in a 6 L sintered glass funnel, 22 cm length of silica gel, diameter 15 cm) using suction and a step-gradient of 5%, 10%, 20%, and 30% ethyl acetate in hexanes —ca 5 L of each). The product containing fractions were combined and concentrated under reduced pressure to a colorless, very thick liquid (310.4 g). To a 5 L of dry three-neck round-bottomed flask fit with a mechanical stirrer, addition funnel maintaining the −30° C. temperature the addition the temperature was slowly increased The reaction was complete after 1 h 15 min (temperature reached −10° C.) The reaction was quenched by addition of Ethyl acetate (900 mL) via addition funnel Sat. NH4Cl (40 mL) was added at 0° C The cloudy mixture was decanted into a 10 L round-bottomed flask The solid residue left behind was filtered washed with ethyl acetate (2×200 mL) the combined solution was concentrated under reduced pressure The oily residue was dissolved in ethyl acetate (2 L) washed with 3 N HCl (600 mL) The aqueous layer was back-extracted with ethyl acetate (3×400 mL) The combined organic layer was washed with water (3×800 mL), sat. NaHCO3 (400 mL) and brine (400 mL) The organic solution was dried over MgSO4 filtered concentrated under reduced pressure to afford a light brown oily residue The residue was purified by plug column (2.2 kg of 40-63 micron silica gel, packed in a 6 L sintered glass funnel, 22 cm length of silica gel, diameter 15 cm) The product containing fractions concentrated under reduced pressure to a colorless, very thick liquid (310.4 g)

反応条件: temp:-17.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

実験手順: Anhydrous dichloromethane (5.6 L) was charged into a reactor and cooled to −22° C. or below. Triphenylphosphine (205.4 g, 0.783 mol) was added to the cold solvent and the suspension was stirred to form a solution. The lactol (2, 209.4 g, 0.559 mol) in solid form was added to the cold solution and stirred for 15 mins. Carbon tetrabromide (278.2 g, 0.839 mol) was added portion-wise while maintaining the temperature of the solution between −22° C. to −20 ° C. under a flow of nitrogen gas (approx. 30 min). After finishing the addition of CBr4, the temperature was slowly raised to −17° C. over 20 mins. The reaction was judged to be >95% complete by TLC (Rfs 0.61 (α), 0.72 (β), 0.36 lactol; 20% EtOAc in hexanes). The reaction solution was immediately transferred to a vessel containing 230 g of flash chromatography grade silica gel (40-63 microns). The stirred mixture was immediately passed through a pad of silica gel (680 g) in a 2.5 L sintered glass Buchner funnel. The filtrate was concentrated under reduced pressure to about 800 mL and the ratio of α/β isomers of the crude product was 10:1 as determined by 1H-NMR. (CDCl3) δ=6.35, (s, α C1-H), 6.43, (d, β C1-H). The residue was purified by plug column chromatography using 2.1 kg of silica gel in a 6 L sintered glass Buchner funnel and eluted (via suction) with a stepwise gradient elution of 1%, 5%, 8% 12% EtOAc in hexane (ca 4 L each) to remove non-polar impurities followed by 12%, 25% EtOAc in hexane (6 L total) to elute the product. The product containing fractions were combined into two fractions, concentrated under reduced pressure, dried under vacuum (0.1 mmHg, ambient temp., 20 h) to colorless oils. Main fraction (197 g, 89% α/β=20:1). The alpha isomer crystallized from a small portion of the oil upon standing at 0° C. for several weeks to give large, thin plates, mp 59-61° C. The pure beta isomer crystallized from a mixture of alpha and beta product oil from an earlier less selective run to give needles, mp 77-79° C. cooled to −22° C. or below to form a solution stirred for 15 mins while maintaining the temperature of the solution between −22° C. to −20 ° C. under a flow of nitrogen gas (approx. 30 min) The reaction solution was immediately transferred to a vessel containing 230 g of flash chromatography grade silica gel (40-63 microns) The filtrate was concentrated under reduced pressure to about 800 mL The residue was purified by plug column chromatography eluted (via suction) with a stepwise gradient elution of 1%, 5%, 8% 12% EtOAc in hexane (ca 4 L each) to remove non-polar impurities to elute the product The product containing fractions concentrated under reduced pressure dried under vacuum (0.1 mmHg, ambient temp., 20 h) to colorless oils The alpha isomer crystallized from a small portion of the oil upon standing at 0° C. for several weeks to give large The pure beta isomer crystallized from a mixture of alpha and beta product oil from an earlier less selective run to give needles, mp 77-79° C.

反応条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

実験手順: To a solution of mixture of compound 2 (1.0 g, 2.67 mmol) and PPh3 (1.4 g, 5.34 mmol) in CH2Cl2 (15 mL) was added NCS (1.07 g, 8.01 mmol) portionwise at 0° C. Then the resulting mixture was stirred at rt for lh and poured into a silica gel column and eluted with EtOAc-hexanes (1:4) using pressure. The collected right fractions were combined, concentrated, and co-evaporated with CH2Cl2 several times and used next step (1.0 g, 95%). poured into a silica gel column eluted with EtOAc-hexanes (1:4) concentrated

反応条件: temp:-17.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

実験手順: Anhydrous dichloromethane (5.6 L) was charged into a reactor and cooled to −22° C. or below. Triphenylphosphine (205.4 g, 0.783 mol) was added to the cold solvent and the suspension was stirred to form a solution. The lactol (8, 209.4 g, 0.559 mol) in solid form was added to the cold solution and stirred for 15 mins. Carbon tetrabromide (278.2 g, 0.839 mol) was added portion-wise while maintaining the temperature of the solution between −22° C. to −20° C. under a flow of nitrogen gas (approx. 30 min). After finishing the addition of CBr4, the temperature was slowly raised to −17° C. over 20 mins. The reaction was judged to be >95% complete by TLC (Rfs 0.61 (α), 0.72 (β), 0.36 lactol; 20% EtOAc in hexanes). The reaction solution was immediately transferred to a vessel containing 230 g of flash chromatography grade silica gel (40-63 microns). The stirred mixture was immediately passed through a pad of silica gel (680 g) in a 2.5 L sintered glass Buchner funnel. The filtrate was concentrated under reduced pressure to about 800 mL and the ratio of α/β isomers of the crude product was 10:1 as determined by 1H-NMR. (CDCl3) δ=6.35, (s, α C1-H), 6.43, (d, β C1-H). The residue was purified by plug column chromatography using 2.1 kg of silica gel in a 6 L sintered glass Buchner funnel and eluted (via suction) with a stepwise gradient elution of 1%, 5%, 8% 12% EtOAc in hexane (ca 4 L each) to remove non-polar impurities followed by 12%, 25% EtOAc in hexane (6 L total) to elute the product. The product containing fractions were combined into two fractions, concentrated under reduced pressure, dried under vacuum (0.1 mmHg, ambient temp., 20 h) to colorless oils. Main fraction (197 g, 89% α/β=20:1). The alpha isomer crystallized from a small portion of the oil upon standing at 0° C. for several weeks to give large, thin plates, mp 59-61° C. The pure beta isomer crystallized from a mixture of alpha and beta product oil from an earlier less selective run to give needles, mp 77-79° C. cooled to −22° C. or below to form a solution stirred for 15 mins while maintaining the temperature of the solution between −22° C. to −20° C. under a flow of nitrogen gas (approx. 30 min) The reaction solution was immediately transferred to a vessel containing 230 g of flash chromatography grade silica gel (40-63 microns) The filtrate was concentrated under reduced pressure to about 800 mL The residue was purified by plug column chromatography eluted (via suction) with a stepwise gradient elution of 1%, 5%, 8% 12% EtOAc in hexane (ca 4 L each) to remove non-polar impurities to elute the product The product containing fractions concentrated under reduced pressure dried under vacuum (0.1 mmHg, ambient temp., 20 h) to colorless oils The alpha isomer crystallized from a small portion of the oil upon standing at 0° C. for several weeks to give large The pure beta isomer crystallized from a mixture of alpha and beta product oil from an earlier less selective run to give needles, mp 77-79° C.

反応条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

実験手順: To a solution of mixture of compound 8 (1.0 g, 2.67 mmol) and PPh3 (1.4 g, 5.34 mmol) in CH2Cl2 (15 mL) was added NCS (1.07 g, 8.01 mmol) portionwise at 0° C. Then the resulting mixture was stirred at rt for 1 h and poured into a silica gel column and eluted with EtOAc-hexanes (1:4) using pressure. The collected right fractions were combined, concentrated, and co-evaporated with CH2Cl2 several times and used next step (1.0 g, 95%). poured into a silica gel column eluted with EtOAc-hexanes (1:4) concentrated

反応条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

実験手順: To a solution of mixture of compound 8 (1.0 g, 2.67 mmol) and PPh3 (1.4 g, 5.34 mmol) in CH2Cl2 (15 mL) was added NCS (1.07 g, 8.01 mmol) portionwise at 0° C. Then the resulting mixture was stirred at rt for 1 h and poured into a silica gel column and eluted with EtOAc-hexanes (1:4) using pressure. The collected right fractions were combined, concentrated, and co-evaporated with CH2Cl2 several times and used next step (1.0 g, 95%). poured into a silica gel column eluted with EtOAc-hexanes (1:4) concentrated