1-bromo-3-propan-2-yloxybenzene

反応条件: temp:0.00; pressure:0.00; stir:

反応条件: temp:-20.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

実験手順: To a stirred solution of 1-bromo-3-(1-methylethoxy)benzene (5.0 g, 23 mmol) in anhydrous tetrahydrofuran (50 ml) at −78° C. under an atmosphere of nitrogen was added n-butyllithium (1.6M in hexane, 13.7 ml, 22 mmol) dropwise. The reaction mixture was stirred for 1 h at −78° C., before N-ethyl-4-piperidone (2.95 ml, 22 mmol) was added dropwise at −78° C. over 15 minutes, and the reaction mixture was then warmed to −20° C. over 30 minutes. The solution was poured onto 2N aqueous hydrochloric acid (35 ml) and this was further acidified to pH 1 with concentrated hydrochloric acid. Hexane (50 ml) was added and the two layers were separated. The organic layer was discarded and the pH of the aqueous layer was adjusted to 14 using sodium hydroxide pellets. The basic aqueous layer was extracted with hexane:diethyl ether (1:1, 5×50 ml) and the combined extracts were dried (MgSO4) and concentrated to give the title compound as a crude oil (4.2 g, 73% crude yield) which was used without further purification. was added dropwise at −78° C. over 15 minutes the two layers were separated The basic aqueous layer was extracted with hexane:diethyl ether (1:1, 5×50 ml) the combined extracts were dried (MgSO4) concentrated

反応条件: temp:-70.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

実験手順: The 3-bromo-i-propoxybenzene (200 g, 0.08703 mol) was combined with THF (540 ml) under nitrogen and cooled to about -75° C. n-Butyl lithium (565 ml, 0.8306 mol) was added dropwise while maintaining the mixture at less than -70° C. After 2 hours 1,3-Dimethyl-4-piperidone (106.7 g, 0.8389 mol) was added while maintaining the temperature of the mixture between -80° C. and -70° C. After stirring 2 hours at -70° C., the reaction mixture was then added to 6N HCl (280 ml) while maintaining the temperature at 20°-25° C. The pH was adjusted to 1 with 12N HCl. The aqueous layer containing product was separated and heptane (320 ml) was added along with 50% NaOH (48 ml, pH=13-14) and the resulting mixture allowed to stand overnight. The mixture was heated to 45°- 50° C. and the upper layer was separated. The remaining aqueous layer was extracted with heptane (320 ml) at 45°-50° C. The combined organic fractions were washed with de-ionized water (120 ml) at 45°-50° C. The resulting organic layer was vacuum distilled at a pot temperature of about 55° C. at 100 mmHg. Crystallization from heptane and drying provided 151.8 g of 3-(3-i-propoxyphenyl)-1,3-dimethyl-4-hydroxypiperidine. Melting point 75.0°-76.0° C. was added dropwise while maintaining the mixture at less than -70° C while maintaining the temperature of the mixture between -80° C. and -70° C while maintaining the temperature at 20°-25° C The aqueous layer containing product was separated heptane (320 ml) was added along with 50% NaOH (48 ml, pH=13-14) to stand overnight The mixture was heated to 45°- 50° C. the upper layer was separated The remaining aqueous layer was extracted with heptane (320 ml) at 45°-50° C The combined organic fractions were washed with de-ionized water (120 ml) at 45°-50° C distilled at a pot temperature of about 55° C. at 100 mmHg Crystallization from heptane drying

反応条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

実験手順: 3-Bromophenol was combined with an equal molar amount of 2-bromopropane in ethanol and in the presence of potassium carbonate to provide 3-bromoisopropoxybenzene.

反応条件: temp:0.00; pressure:0.00; stir:

反応条件: temp:-70.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

実験手順: The 3-bromo-i-propoxybenzene (200 g, 0.08703 mol) was combined with THF (540 ml) under nitrogen and cooled to about -75° C. n-Butyl lithium (565 ml, 0.8306 mol) was added dropwise while maintaining the mixture at less than -70° C. After 2 hours 1,3-Dimethyl-4-piperidone (106.7 g, 0.8389 mol) was added while maintaining the temperature of the mixture between -80° C. and -70° C. After stirring 2 hours at -70° C., the reaction mixture was then added to 6N HCl (280 ml) while maintaining the temperature at 20°-25° C. The pH was adjusted to 1 with 12 N HCl. The aqueous layer containing product was separated and heptane (320 ml) was added along with 50% NaOH (48 ml, pH=13-14) and the resulting mixture allowed to stand overnight. The mixture was heated to 45° -50° C. and the upper layer was separated. The remaining aqueous layer was extracted with heptane (320 ml) at 45°-50° C. The combined organic fractions were washed with de-ionized water (120 ml) at 45°-50° C. The resulting organic layer was vacuum distilled at a pot temperature of about 55° C. at 100 mmHg. Crystallization from heptane and drying provided 151.8 g of 3-(3-i-propoxyphenyl)-1,3-dimethyl-4-hydroxypiperidine. Melting point 75.0°-76.0° C. was added dropwise while maintaining the mixture at less than -70° C while maintaining the temperature of the mixture between -80° C. and -70° C while maintaining the temperature at 20°-25° C The aqueous layer containing product was separated heptane (320 ml) was added along with 50% NaOH (48 ml, pH=13-14) to stand overnight The mixture was heated to 45° -50° C. the upper layer was separated The remaining aqueous layer was extracted with heptane (320 ml) at 45°-50° C The combined organic fractions were washed with de-ionized water (120 ml) at 45°-50° C distilled at a pot temperature of about 55° C. at 100 mmHg Crystallization from heptane drying

反応条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

実験手順: 3-Bromophenol was combined with an equal molar amount of 2-bromopropane in ethanol and in the presence of potassium carbonate to provide 3-bromoisopropoxybenzene.

反応条件: temp:-20.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

実験手順: To a stirred solution of 1-bromo-3-(1-methylethoxy)benzene (5.0 g, 23 mmol) in anhydrous tetrahydrofuran (50 ml) at −78° C. under an atmosphere of nitrogen was added n-butyllithium (1.6M in hexane, 13.7 ml, 22 mmol) dropwise. The reaction mixture was stirred for 1 h at −78° C., before N-ethyl-4-piperidone (2.95 ml, 22 mmol) was added dropwise at −78° C. over 15 minutes, and the reaction mixture was then warmed to −20° C. over 30 minutes. The solution was poured onto 2N aqueous hydrochloric acid (35 ml) and this was further acidified to pH 1 with concentrated hydrochloric acid. Hexane (50 ml) was added and the two layers were separated. The organic layer was discarded and the pH of the aqueous layer was adjusted to 14 using sodium hydroxide pellets. The basic aqueous layer was extracted with hexane:diethyl ether (1:1, 5×50 ml) and the combined extracts were dried (MgSO4) and concentrated to give the title compound as a crude oil (4.2 g, 73% crude yield) which was used without further purification. was added dropwise at −78° C. over 15 minutes the two layers were separated The basic aqueous layer was extracted with hexane:diethyl ether (1:1, 5×50 ml) the combined extracts were dried (MgSO4) concentrated

反応条件: temp:-70.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

実験手順: The 3-bromo-i-propoxybenzene (200 g, 0.08703 mol) was combined with THF (540 ml) under nitrogen and cooled to about -75° C. n-Butyl lithium (565 ml, 0.8306 mol) was added dropwise while maintaining the mixture at less than -70° C. After 2 hours 1,3-Dimethyl-4-piperidone (106.7 g, 0.8389 mol) was added while maintaining the temperature of the mixture between -80° C. and -70° C. After stirring 2 hours at -70° C., the reaction mixture was then added to 6N HCl (280 ml) while maintaining the temperature at 20°-25° C. The pH was adjusted to 1 with 12N HCl. The aqueous layer containing product was separated and heptane (320 ml) was added along with 50% NaOH (48 ml, pH=13-14) and the resulting mixture allowed to stand overnight. The mixture was heated to 45°- 50° C. and the upper layer was separated. The remaining aqueous layer was extracted with heptane (320 ml) at 45°-50° C. The combined organic fractions were washed with de-ionized water (120 ml) at 45°-50° C. The resulting organic layer was vacuum distilled at a pot temperature of about 55° C. at 100 mmHg. Crystallization from heptane and drying provided 151.8 g of 3-(3-i-propoxyphenyl)-1,3-dimethyl-4-hydroxypiperidine. Melting point 75.0°-76.0° C. was added dropwise while maintaining the mixture at less than -70° C while maintaining the temperature of the mixture between -80° C. and -70° C while maintaining the temperature at 20°-25° C The aqueous layer containing product was separated heptane (320 ml) was added along with 50% NaOH (48 ml, pH=13-14) to stand overnight The mixture was heated to 45°- 50° C. the upper layer was separated The remaining aqueous layer was extracted with heptane (320 ml) at 45°-50° C The combined organic fractions were washed with de-ionized water (120 ml) at 45°-50° C distilled at a pot temperature of about 55° C. at 100 mmHg Crystallization from heptane drying

反応条件: temp:-70.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

実験手順: The 3-bromo-i-propoxybenzene (200 g, 0.08703 mol) was combined with THF (540 ml) under nitrogen and cooled to about -75° C. n-Butyl lithium (565 ml, 0.8306 mol) was added dropwise while maintaining the mixture at less than -70° C. After 2 hours 1,3-Dimethyl-4-piperidone (106.7 g, 0.8389 mol) was added while maintaining the temperature of the mixture between -80° C. and -70° C. After stirring 2 hours at -70° C., the reaction mixture was then added to 6N HCl (280 ml) while maintaining the temperature at 20°-25° C. The pH was adjusted to 1 with 12N HCl. The aqueous layer containing product was separated and heptane (320 ml) was added along with 50% NaOH (48 ml, pH=13-14) and the resulting mixture allowed to stand overnight. The mixture was heated to 45°- 50° C. and the upper layer was separated. The remaining aqueous layer was extracted with heptane (320 ml) at 45°-50° C. The combined organic fractions were washed with de-ionized water (120 ml) at 45°-50° C. The resulting organic layer was vacuum distilled at a pot temperature of about 55° C. at 100 mmHg. Crystallization from heptane and drying provided 151.8 g of 3-(3-i-propoxyphenyl)-1,3-dimethyl-4-hydroxypiperidine. Melting point 75.0°-76.0° C. was added dropwise while maintaining the mixture at less than -70° C while maintaining the temperature of the mixture between -80° C. and -70° C while maintaining the temperature at 20°-25° C The aqueous layer containing product was separated heptane (320 ml) was added along with 50% NaOH (48 ml, pH=13-14) to stand overnight The mixture was heated to 45°- 50° C. the upper layer was separated The remaining aqueous layer was extracted with heptane (320 ml) at 45°-50° C The combined organic fractions were washed with de-ionized water (120 ml) at 45°-50° C distilled at a pot temperature of about 55° C. at 100 mmHg Crystallization from heptane drying

反応条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

実験手順: 3-Bromophenol was combined with an equal molar amount of 2-bromopropane in ethanol and in the presence of potassium carbonate to provide 3-bromoisopropoxybenzene.

反応条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

実験手順: 3-Bromophenol was combined with an equal molar amount of 2-bromopropane in ethanol and in the presence of potassium carbonate to provide 3-bromoisopropoxybenzene.