2-Isocyanatoethyl Acrylate

反応条件: temp:50.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

実験手順: A three-necked flask was charged with 500 ml of toluene, 60 g (0.34 mol) of (2-isocyanatoethyl) 3-chloropropionate obtained in Synthesis Example 2, and 200 g of a dried strongly basic ion-exchange resin, followed by heating at 50° C. for 6 hours with stirring. After cooling to room temperature, the ion-exchange resin was filtered off. Subsequently, the toluene was evaporated, and the remainder was distilled (at 62-67° C. and 0.7 kPa) to yield 41 g (0.29 mol) of acryloyloxyethyl isocyanate (boiling point: 200° C.) (86% yield). The hydrolyzable chlorine concentration was 270 ppm. obtained in Synthesis Example 2, and 200 g of a dried strongly basic ion-exchange resin After cooling to room temperature the ion-exchange resin was filtered off Subsequently, the toluene was evaporated the remainder was distilled (at 62-67° C. and 0.7 kPa)

反応条件: temp:60.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

実験手順: 625 g (0.5 mol) of polyester polyol in the form of polycaprolactone diol (Daicel Chemical Industries, PLACCEL212, molecular weight: 1,250) and 142 g (1.0 mol) of 2-acryloyloxyethylisocyanate and 1.0 g each of p-methoxyphenol and di-t-butyl-hydroxytoluene were placed in a reaction vessel equipped with a stirring device, thermometer and condenser. After heating to 60° C. while stirring, heating was discontinued followed by the addition of 0.2 g of dibutyl tin dilaurate. Heating was resumed when the temperature inside the reaction vessel began to drop and stirring was continued at 80° C. The reaction was completed by confirming that the absorption spectrum of the isocyanate group (2,280 cm−1) had disappeared based on the infrared absorption spectrum to obtain a urethane acrylate compound in the form of a viscous liquid. The average molecular weight of the resulting urethane acrylate (UA-1) was 1,600. equipped with a stirring device heating Heating stirring was continued at 80° C