4-hydroxy-2-methylbenzonitrile

反応条件: temp:0.00; pressure:0.00; stir:

反応条件: temp:0.00; pressure:0.00; stir:

反応条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

実験手順: Boron trichloride (1M in dichloromethane, 747 ml, 747 mmol) was added dropwise, at −78° C., to a suspension of commercially available 4-methoxy-2-methyl-benzonitrile (44 g, 298 mmol) and tetrabutylammonium iodide (121 g, 327 mmol) in dichloromethane (750 ml), under nitrogen, over 40 minutes. Once the addition was complete, the yellow solution was warmed to room temperature and stirred for 16 hours at room temperature. The reaction mixture was then quenched by dropwise addition of water maintaining the internal temperature below 10° C. The mixture was filtered through Arbocel™ and the layers were separated. The aqueous layers were extracted again with dichloromethane (250 ml). The organic layers were combined, washed with a sodium thiosulphate solution (150 ml), dried over magnesium sulphate, filtered and concentrated under reduced pressure to give thick yellow oil. Trituration of the oil in dichloromethane, followed by filtration, provided a first crop of the title compound (10.8 g, 27%) as a white solid. The filtrate was evaporated and purified by flash chromatography on silica gel, eluting with pentane:ethyl acetate (70:30, by volume) to provide more of the title compound as a white solid (14.4 g, 36%). 1H-NMR (400 MHz, CDCl3): δ=2.46 (s, 3H), 6.68 (d, 1H), 6.72 (s, 1H), 7.45 (d, 1H); LRMS: APCl−: m/z 132 [M−H]−. Once the addition The reaction mixture was then quenched by dropwise addition of water maintaining the internal temperature below 10° C The mixture was filtered through Arbocel™ the layers were separated The aqueous layers were extracted again with dichloromethane (250 ml) washed with a sodium thiosulphate solution (150 ml) dried over magnesium sulphate filtered concentrated under reduced pressure to give thick yellow oil Trituration of the oil in dichloromethane, followed by filtration

反応条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

実験手順: Boron trichloride (1 M in dichloromethane, 747 ml, 747 mmol) was added dropwise, at −78° C., to a suspension of commercially available 4-methoxy-2-methyl-benzonitrile (44 g, 298 mmol) and tetrabutylammonium iodide (121 g, 327 mmol) in dichloromethane (750 ml), under nitrogen, over 40 minutes. Once the addition was complete, the yellow solution was warmed to room temperature and stirred for 16 hours at room temperature. The reaction mixture was then quenched by dropwise addition of water maintaining the internal temperature below 10° C. The mixture was filtered through Arbocel™ and the layers were separated. The aqueous layers were extracted again with dichloromethane (250 ml). The organic layers were combined, washed with a sodium thiosulphate solution (150 ml), dried over magnesium sulphate, filtered and concentrated under reduced pressure to give thick yellow oil. Trituration of the oil in dichloromethane, followed by filtration, provided a first crop of the title compound (10.8 g, 27%) as a white solid. The filtrate was evaporated and purified by flash chromatography on silica gel, eluting with pentane:ethyl acetate (70:30, by volume) to provide more of the title compound as a white solid (14.4 g, 36%). 1H-NMR (400 MHz, CDCl3): δ=2.46 (s, 3H), 6.68 (d, 1H), 6.72 (s, 1H), 7.45 (d, 1H); LRMS: APCl−: m/z 132 [M−H]−. Once the addition The reaction mixture was then quenched by dropwise addition of water maintaining the internal temperature below 10° C The mixture was filtered through Arbocel™ the layers were separated The aqueous layers were extracted again with dichloromethane (250 ml) washed with a sodium thiosulphate solution (150 ml) dried over magnesium sulphate filtered concentrated under reduced pressure to give thick yellow oil Trituration of the oil in dichloromethane, followed by filtration

反応条件: temp:0.00; pressure:0.00; stir:

反応条件: temp:0.00; pressure:0.00; stir:

反応条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

実験手順: Boron trichloride (1 M in dichloromethane, 747 ml, 747 mmol) was added dropwise, at −78° C., to a suspension of commercially available 4-methoxy-2-methyl-benzonitrile (44 g, 298 mmol) and tetrabutylammonium iodide (121 g, 327 mmol) in dichloromethane (750 ml), under nitrogen, over 40 minutes. Once the addition was complete, the yellow solution was warmed to room temperature and stirred for 16 hours at room temperature. The reaction mixture was then quenched by dropwise addition of water maintaining the internal temperature below 10° C. The mixture was filtered through Arbocel™ and the layers were separated. The aqueous layers were extracted again with dichloromethane (250 ml). The organic layers were combined, washed with a sodium thiosulphate solution (150 ml), dried over magnesium sulphate, filtered and concentrated under reduced pressure to give thick yellow oil. Trituration of the oil in dichloromethane, followed by filtration, provided a first crop of the title compound (10.8 g, 27%) as a white solid. The filtrate was evaporated and purified by flash chromatography on silica gel, eluting with pentane:ethyl acetate (70:30, by volume) to provide more of the title compound as a white solid (14.4 g, 36%). 1H-NMR (400 MHz, CDCl3): δ=2.46 (s, 3H), 6.68 (d, 1H), 6.72 (s, 1H), 7.45 (d, 1H); LRMS: APCl−: m/z 132 [M−H]−. Once the addition The reaction mixture was then quenched by dropwise addition of water maintaining the internal temperature below 10° C The mixture was filtered through Arbocel™ the layers were separated The aqueous layers were extracted again with dichloromethane (250 ml) washed with a sodium thiosulphate solution (150 ml) dried over magnesium sulphate filtered concentrated under reduced pressure to give thick yellow oil Trituration of the oil in dichloromethane, followed by filtration

反応条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

実験手順: The title compound is obtained as a beige oil (0.65 g) in analogy to rac-4-(2,2-dimethyl-[1,3]dioxolan-4-ylmethoxy)-N-hydroxy-3,5-dimethyl-benzamidine starting from 4-hydroxy-2-methyl-benzonitrile and L-alpha-beta-isopropyliden glycerol; LC-MS: tR=0.62 min, [M+H]+=281.0.

反応条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

実験手順: The title compound is obtained as a beige oil (1.0 g) in analogy to N—((S)-3-[2-ethyl-4-(N-hydroxycarbamimidoyl)-6-methyl-phenoxy]-2-hydroxy-propyl)-2-hydroxy-acetamide starting from 4-hydroxy-2-methyl-benzonitrile; LC-MS: tR=0.35 min, [M+H]+=297.99.

反応条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

実験手順: A solution of 4-methoxy-2-methylbenzonitrile (5.0 g, 33.97 mmol) in DCM (150 mL) is cooled down to 0° C. before adding dropwise a 1M BBr3 in DCM solution (136 mL, 136 mmol). The reaction mixture is allowed to reach rt and stirring is then continued at 45° C. for 5 days. Ice water (500 mL) is then added and the reaction mixture is stirred for 1 h before sat. aq. NaHCO3 (250 mL) is added. The mixture is extracted with DCM (200 mL then 4×100 mL) and the combined org. extracts are dried over MgSO4, filtered and evaporated to give the title compound as a brown solid (4.7 g); LC-MS: tR=0.76 min. 1H NMR (D6-DMSO): δ 2.38 (s, 3H), 6.73 (dd, J=8.5, 2.0 Hz, 1H), 6.79 (d, J=2.0 Hz, 1H), 7.55 (d, J=8.5 Hz, 1H), 10.49 (s, 1H). to reach rt is added The mixture is extracted with DCM (200 mL extracts are dried over MgSO4 filtered evaporated

反応条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

実験手順: The title compound is obtained as a beige oil (1.0 g) in analogy to N—((S)-3-[2-ethyl-4-(N-hydroxycarbamimidoyl)-6-methyl-phenoxy]-2-hydroxy-propyl)-2-hydroxy-acetamide starting from 4-hydroxy-2-methyl-benzonitrile. LC-MS: tR=0.35 min, [M+H]+=297.99.

反応条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

実験手順: A solution of 4-methoxy-2-methylbenzonitrile (5.0 g, 33.97 mmol) in DCM (150 mL) is cooled down to 0° C. before adding dropwise a 1M solution of BBr3 in DCM (136 mL, 136 mmol). The reaction mixture is allowed to reach rt and stirring is then continued at 45° C. for 5 days. Ice water (500 mL) is then added and the reaction mixture is stirred for 1 h before sat. aq. NaHCO3 (250 mL) is added. The mixture is extracted with DCM (200 mL then 4×100 mL) and the combined org. extracts are dried over MgSO4, filtered and evaporated to give the title compound as a brown solid (4.7 g). LC-MS: tR=0.76 min. 1H NMR (D6-DMSO): δ 2.38 (s, 3H), 6.73 (dd, J=8.5, 2.0 Hz, 1H), 6.79 (d, J=2.0 Hz, 1H), 7.55 (d, J=8.5 Hz, 1H), 10.49 (s, 1H). to reach rt is added The mixture is extracted with DCM (200 mL extracts are dried over MgSO4 filtered evaporated