benzyl 2-cyanoacetate

反応条件: temp:0.00; pressure:0.00; stir:

反応条件: temp:0.00; pressure:0.00; stir:

反応条件: temp:0.00; pressure:0.00; stir:

反応条件: temp:0.00; pressure:0.00; stir:

反応条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

実験手順: To a suspension of t-BuONO (8.01 mL, 67.5 mmol) and CuCl2 (7.26 g, 54 mmol) in acetonitrile (50 mL), at 61° C. with gentle stirring, is added 2-nitro-4-trifluoromethoxyaniline (10.0 g, 45.0 mmol) portionwise. The mixture is stirred at this temperature for 2 h after the addition. The solvent is removed on a rotorvap and the residue is treated with HCl (6 N, 200 mL), and extracted with dichloromethane (3×100 mL). The extracts are combined, dried over anhydrous Na2SO4, and passed through a short silica gel pad. The solvent is removed and the residue is added to a suspension of benzyl cyanoacetate (7.88 g, 45 mmol) and K2CO3 (12.42 g, 90 mmol) in DMF (100 mL). This mixture is then stirred at 45° C. overnight and poured into ice-water (700 mL), and extracted with dichloromethane (3×100 mL). The organics are dried over anhydrous Na2SO4 and again passed through a short silica gel pad, eluting with ethyl acetate. The solvent is then replaced with EtOH (160 mL), acetic acid (16 mL) and water (16 mL), and the reaction mixture is hydrogenated over 5% Pd/C (2.80 g) at 50 psi overnight. The mixture is filtered over Celite and the volatiles are removed in vacuo. The residue is dissolved in dichloromethane (200 mL), washed with Na2CO3 (2 M, 2×50 mL), water (2×50 mL), brine (50 mL) and dried over anhydrous Na2SO4. The crude product, obtained after the removal of the solvent, is chromatographed (silica gel, DCM/Hexanes, 1/1) to provide 6-trifluoromethoxyindole (5.70 g, 63% based on 2-nitro-4-trifluoromethoxyaniline). after the addition The solvent is removed on a rotorvap the residue is treated with HCl (6 N, 200 mL) extracted with dichloromethane (3×100 mL) dried over anhydrous Na2SO4 The solvent is removed This mixture is then stirred at 45° C. overnight extracted with dichloromethane (3×100 mL) The organics are dried over anhydrous Na2SO4 eluting with ethyl acetate is hydrogenated over 5% Pd/C (2.80 g) at 50 psi overnight The mixture is filtered over Celite the volatiles are removed in vacuo The residue is dissolved in dichloromethane (200 mL) washed with Na2CO3 (2 M, 2×50 mL), water (2×50 mL), brine (50 mL) dried over anhydrous Na2SO4 The crude product, obtained after the removal of the solvent is chromatographed (silica gel, DCM/Hexanes, 1/1)

反応条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

実験手順: To a suspension of t-BuONO (8.01 mL, 67.5 mmol) and CuCl2 (7.26 g, 54 mmol) in acetonitrile (50 mL), at 61° C. with gentle stirring, is added 2-nitro-4-trifluoromethoxyaniline (10.0 g, 45.0 mmol) portionwise. The mixture is stirred at this temperature for 2 h after the addition. The solvent is removed on a rotorvap and the residue is treated with HCl (6 N, 200 mL), and extracted with dichloromethane (3×100 mL). The extracts are combined, dried over anhydrous Na2SO4, and passed through a short silica gel pad. The solvent is removed and the residue is added to a suspension of benzyl cyanoacetate (7.88 g, 45 mmol) and K2CO3 (12.42 g, 90 mmol) in DMF (100 mL). This mixture is then stirred at 45° C. overnight and poured into ice-water (700 mL), and extracted with dichloromethane (3×100 mL). The organics are dried over anhydrous Na2SO4 and again passed through a short silica gel pad, eluting with ethyl acetate. The solvent is then replaced with EtOH (160 mL), acetic acid (16 mL) and water (16 mL), and the reaction mixture is hydrogenated over 5% Pd/C (2.80 g) at 50 psi overnight. The mixture is filtered over Celite and the volatiles are removed in vacuo. The residue is dissolved in dichloromethane (200 mL), washed with Na2CO3 (2 M, 2×50 mL), water (2×50 mL), brine (50 mL) and dried over anhydrous Na2SO4. The crude product, obtained after the removal of the solvent, is chromatographed (silica gel, DCM/Hexanes, 1/1) to provide 6-trifluoromethoxyindole (5.70 g, 63% based on 2-nitro-4-trifluoromethoxyaniline). after the addition The solvent is removed on a rotorvap the residue is treated with HCl (6 N, 200 mL) extracted with dichloromethane (3×100 mL) dried over anhydrous Na2SO4 The solvent is removed This mixture is then stirred at 45° C. overnight extracted with dichloromethane (3×100 mL) The organics are dried over anhydrous Na2SO4 eluting with ethyl acetate is hydrogenated over 5% Pd/C (2.80 g) at 50 psi overnight The mixture is filtered over Celite the volatiles are removed in vacuo The residue is dissolved in dichloromethane (200 mL) washed with Na2CO3 (2 M, 2×50 mL), water (2×50 mL), brine (50 mL) dried over anhydrous Na2SO4 The crude product, obtained after the removal of the solvent is chromatographed (silica gel, DCM/Hexanes, 1/1)

反応条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

実験手順: To a suspension of t-BuONO (8.01 mL, 67.5 mmol) and CuCl2 (7.26 g, 54 mmol) in acetonitrile (50 mL), at 61° C. with gentle stirring, is added 2-nitro-4-trifluoromethoxyaniline (10.0 g, 45.0 mmol) portionwise. The mixture is stirred at this temperature for 2 h after the addition. The solvent is removed on a rotorvap and the residue is treated with HCl (6 N, 200 mL), and extracted with dichloromethane (3×100 mL). The extracts are combined, dried over anhydrous Na2SO4, and passed through a short silica gel pad. The solvent is removed and the residue is added to a suspension of benzyl cyanoacetate (7.88 g, 45 mmol) and K2CO3 (12.42 g, 90 mmol) in DMF (100 mL). This mixture is then stirred at 45° C. overnight and poured into ice-water (700 mL), and extracted with dichloromethane (3×100 mL). The organics are dried over anhydrous Na2SO4 and again passed through a short silica gel pad, eluting with ethyl acetate. The solvent is then replaced with EtOH (160 mL), acetic acid (16 mL) and water (16 mL), and the reaction mixture is hydrogenated over 5% Pd/C (2.80 g) at 50 psi overnight. The mixture is filtered over Celite and the volatiles are removed in vacuo. The residue is dissolved in dichloromethane (200 mL), washed with Na2CO3 (2 M, 2×50 mL), water (2×50 mL), brine (50 mL) and dried over anhydrous Na2SO4. The crude product, obtained after the removal of the solvent, is chromatographed (silica gel, DCM/Hexanes, 1/1) to provide 6-trifluoromethoxyindole (5.70 g, 63% based on 2-nitro-4-trifluoromethoxyaniline). after the addition The solvent is removed on a rotorvap the residue is treated with HCl (6 N, 200 mL) extracted with dichloromethane (3×100 mL) dried over anhydrous Na2SO4 The solvent is removed This mixture is then stirred at 45° C. overnight extracted with dichloromethane (3×100 mL) The organics are dried over anhydrous Na2SO4 eluting with ethyl acetate is hydrogenated over 5% Pd/C (2.80 g) at 50 psi overnight The mixture is filtered over Celite the volatiles are removed in vacuo The residue is dissolved in dichloromethane (200 mL) washed with Na2CO3 (2 M, 2×50 mL), water (2×50 mL), brine (50 mL) dried over anhydrous Na2SO4 The crude product, obtained after the removal of the solvent is chromatographed (silica gel, DCM/Hexanes, 1/1)

反応条件: temp:60.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

実験手順: A suspension of 1,4-difluoro-2-methyl-5-nitrobenzene (1.00 g), cyanoacetic acid benzyl ester (1.01 g) and potassium carbonate (1.76 g) in N,N-dimethylformamide (20.0 mL) was stirred at 60° C. for 1 day. To this reaction mixture was added 1 mol/L hydrochloric acid (25.4 mL), and this mixture was extracted with diethyl ether. This organic layer was washed with brine, and dried over anhydrous magnesium sulfate, and filtered. The solvent was removed under reduced pressure. This residue was washed with ethanol to give the title compound (1.54 g). this mixture was extracted with diethyl ether This organic layer was washed with brine dried over anhydrous magnesium sulfate filtered The solvent was removed under reduced pressure This residue was washed with ethanol

反応条件: temp:0.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

実験手順: 1.10 g of magnesium chloride (11.5 mmol) in 15 ml of acetonitrile are admixed at 0° C. with 2.0 g (11.4 mmol) of benzyl cyanoacetate and 2.3 g (22.9 mmol) of triethylamine. After stirring for 20 min at 0° C., 3.27 g (11.4 mmol) of 2-(methylsulfonyl)-4-trifluoromethylbenzoyl chloride are added in portions. The mixture is stirred for 16 h at RT, acidified with 2n HCl and extracted with ether. The organic phase is dried and concentrated in a rotary evaporator. Yield 2.74 g (56%; 1H-NMR, CDCl3, 400 MHz: 14.20 (bs, 1H), 8.43 (s, 1H), 8.05 (d, 1H), 7.82 (d, 1H), 5.40 (s, 2H), 3.30 (s, 3H)) of benzyl 2-(2-(methylsulfonyl)-4-trifluoromethylbenzoyl)cyanoacetate, which, after adding 0.65 g (1 eq) of triethylamine in THF, is hydrogenated for 2 h. After filtration, the mixture is diluted with ethyl acetate and washed with 2N HCl, NaHCO3 solution and sodium chloride solution. Yield 1.41 g (75%). 1H NMR, CDCl3, 400 MHz: 8.36 (s, 1H), 8.04 (d, 1H), 7.63 (d, 1H), 4.03 (s, 2H), 3.21 (s, 3H). The mixture is stirred for 16 h at RT extracted with ether The organic phase is dried concentrated in a rotary evaporator is hydrogenated for 2 h After filtration the mixture is diluted with ethyl acetate washed with 2N HCl, NaHCO3 solution and sodium chloride solution

反応条件: temp:0.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

実験手順: 1.10 g of magnesium chloride (11.5 mmol) in 15 ml of acetonitrile are admixed at 0° C. with 2.0 g (11.4 mmol) of benzyl cyanoacetate and 2.3 g (22.9 mmol) of triethylamine. After stirring for 20 min at 0° C., 3.27 g (11.4 mmol) of 2-(methylsulfonyl)-4-trifluoromethylbenzoyl chloride are added in portions. The mixture is stirred for 16 h at RT, acidified with 2n HCl and extracted with ether. The organic phase is dried and concentrated in a rotary evaporator. Yield 2.74 g (56%; 1H-NMR, CDCl3, 400 MHz: 14.20 (bs, 1H), 8.43 (s, 1H), 8.05 (d, 1H), 7.82 (d, 1H), 5.40 (s, 2H), 3.30 (s, 3H)) of benzyl 2-(2-(methylsulfonyl)-4-trifluoromethylbenzoyl)cyanoacetate, which, after adding 0.65 g (1 eq) of triethylamine in THF, is hydrogenated for 2 h. After filtration, the mixture is diluted with ethyl acetate and washed with 2N HCl, NaHCO3 solution and sodium chloride solution. Yield 1.41 g (75%). 1H NMR, CDCl3, 400 MHz: 8.36 (s, 1H), 8.04 (d, 1H), 7.63 (d, 1H), 4.03 (s, 2H), 3.21 (s, 3H). The mixture is stirred for 16 h at RT extracted with ether The organic phase is dried concentrated in a rotary evaporator is hydrogenated for 2 h After filtration the mixture is diluted with ethyl acetate washed with 2N HCl, NaHCO3 solution and sodium chloride solution

反応条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

実験手順: To a suspension of t-BuONO (8.01 mL, 67.5 mmol) and CuCl2 (7.26 g, 54 mmol) in acetonitrile (50 mL), at 61° C. with gentle stirring, is added 2-nitro-4-trifluoromethoxyaniline (10.0 g, 45.0 mmol) portionwise. The mixture is stirred at this temperature for 2 h after the addition. The solvent is removed on a rotorvap and the residue is treated with HCl (6 N, 200 mL), and extracted with dichloromethane (3×100 mL). The extracts are combined, dried over anhydrous Na2SO4, and passed through a short silica gel pad. The solvent is removed and the residue is added to a suspension of benzyl cyanoacetate (7.88 g, 45 mmol) and K2CO3 (12.42 g, 90 mmol) in DMF (100 mL). This mixture is then stirred at 45° C. overnight and poured into ice-water (700 mL), and extracted with dichloromethane (3×100 mL). The organics are dried over anhydrous Na2SO4 and again passed through a short silica gel pad, eluting with ethyl acetate. The solvent is then replaced with EtOH (160 mL), acetic acid (16 mL) and water (16 mL), and the reaction mixture is hydrogenated over 5% Pd/C (2.80 g) at 50 psi overnight. The mixture is filtered over Celite and the volatiles are removed in vacuo. The residue is dissolved in dichloromethane (200 mL), washed with Na2CO3 (2 M, 2×50 mL), water (2×50 mL), brine (50 mL) and dried over anhydrous Na2SO4. The crude product, obtained after the removal of the solvent, is chromatographed (silica gel, DCM/Hexanes, 1/1) to provide 6-trifluoromethoxyindole (5.70 g, 63% based on 2-nitro-4-trifluoromethoxyaniline). after the addition The solvent is removed on a rotorvap the residue is treated with HCl (6 N, 200 mL) extracted with dichloromethane (3×100 mL) dried over anhydrous Na2SO4 The solvent is removed This mixture is then stirred at 45° C. overnight extracted with dichloromethane (3×100 mL) The organics are dried over anhydrous Na2SO4 eluting with ethyl acetate is hydrogenated over 5% Pd/C (2.80 g) at 50 psi overnight The mixture is filtered over Celite the volatiles are removed in vacuo The residue is dissolved in dichloromethane (200 mL) washed with Na2CO3 (2 M, 2×50 mL), water (2×50 mL), brine (50 mL) dried over anhydrous Na2SO4 The crude product, obtained after the removal of the solvent is chromatographed (silica gel, DCM/Hexanes, 1/1)

反応条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

実験手順: To a suspension of t-BuONO (8.01 mL, 67.5 mmol) and CuCl2 (7.26 g, 54 mmol) in acetonitrile (50 mL), at 61° C. with gentle stirring, is added 2-nitro-4-trifluoromethoxyaniline (10.0 g, 45.0 mmol) portionwise. The mixture is stirred at this temperature for 2 h after the addition. The solvent is removed on a rotovap and the residue is treated with HCl (6 N, 200 mL), and extracted with dichloromethane (3×100 mL). The extracts are combined, dried over anhydrous Na2SO4, and passed through a short silica gel pad. The solvent is removed and the residue is added to a suspension of benzyl cyanoacetate (7.88 g, 45 mmol) and K2CO3 (12.42 g, 90 mmol) in DMF (100 mL). This mixture is then stirred at 45° C. overnight and poured into ice-water (700 mL), and extracted with dichloromethane (3×100 mL). The organics are dried over anhydrous Na2SO4 and again passed through a short silica gel pad, eluting with ethyl acetate. The solvent is then replaced with EtOH (160 mL), acetic acid (16 mL) and water (16 mL), and the reaction mixture is hydrogenated over 5% Pd/C (2.80 g) at 50 psi overnight. The mixture is filtered over Celite and the volatiles are removed in vacuo. The residue is dissolved in dichloromethane (200 mL), washed with Na2CO3 (2 M, 2×50 mL), water (2×50 mL), brine (50 mL) and dried over anhydrous Na2SO4. The crude product, obtained after the removal of the solvent, is chromatographed (silica gel, DCM/Hexanes, 1/1) to provide 6-trifluoromethoxyindole (5.70 g, 63% based on 2-nitro-4-trifluoromethoxyaniline). after the addition The solvent is removed on a rotovap the residue is treated with HCl (6 N, 200 mL) extracted with dichloromethane (3×100 mL) dried over anhydrous Na2SO4 The solvent is removed This mixture is then stirred at 45° C. overnight extracted with dichloromethane (3×100 mL) The organics are dried over anhydrous Na2SO4 eluting with ethyl acetate is hydrogenated over 5% Pd/C (2.80 g) at 50 psi overnight The mixture is filtered over Celite the volatiles are removed in vacuo The residue is dissolved in dichloromethane (200 mL) washed with Na2CO3 (2 M, 2×50 mL), water (2×50 mL), brine (50 mL) dried over anhydrous Na2SO4 The crude product, obtained after the removal of the solvent is chromatographed (silica gel, DCM/Hexanes, 1/1)