benzyl N-(3-fluorophenyl)carbamate

反応条件: temp:-78.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

実験手順: A solution of amine 102 (39.2 g, 160.0 mmol) in anhydrous THF (300 mL) was cooled to −78° C. in a dry-ice/acetone bath before a solution of n-butyl lithium (n-BuLi, 2.5 M solution in hexane, 70.4 mL, 176 mmol, 1.1 equiv) was dropwise added under N2. The resulting reaction mixture was subsequently stirred at −78° C. for 1 h before a solution of (R)-(−)-glycidyl butyrate (25.37 g, 24.6 mL, 176 mmol, 1.1 equiv) in anhydrous THF (100 mL) was dropwise added into the reaction mixture at −78° C. under N2. The resulting reaction mixture was stirred at −78° C. for 30 min before being gradually warmed to room temperature for 12 h under N2. When TLC and HPLC/MS showed the reaction was complete, the reaction mixture was quenched with H2O (200 mL), and the resulting mixture was stirred at room temperature for 1 h before EtOAc (200 mL) was added. The two layers were separated, and the aqueous layer was extracted with EtOAc (2×100 mL). The combined organic extracts were washed with H2O (2×100 mL) and saturated aqueous NaCl (100 mL), dried over MgSO4, and concentrated in vacuo. White crystals precipitated from the concentrated solution when most of the solvent was evaporated. The residue was then treated with 20% EtOAc/hexane (100 mL) and the resulting slurry was stirred at room temperature for 30 min. The solids were collected by filtration and washed with 20% EtOAc/hexane (2×50 mL) to afford the desired (5R)-(3-(3-fluoro-phenyl)-5-hydroxymethyl-oxazolidin-2-one 103 (24.4 g, 72.3% yield) as white crystals. This product was directly used in subsequent reactions without further purification. 1H NMR (300 MHz, DMSO-d6) δ 3.34-3.72 (m, 2H), 3.83 (dd, 1H, J=6.2, 9.0 Hz), 4.09 (t, 111, J=12.0 Hz), 4.68-4.75 (m, 1H), 5.23 (t, 1H, J=5.6 Hz, OH), 6.96 (m, 1H), 7.32-7.56 (m, 3H). C10H10FNO3, LCMS (EI) m/e 212 (M++H). was dropwise added under N2 The resulting reaction mixture was dropwise added into the reaction mixture at −78° C. under N2 The resulting reaction mixture before being gradually warmed to room temperature for 12 h under N2 the reaction mixture was quenched with H2O (200 mL) the resulting mixture was stirred at room temperature for 1 h before EtOAc (200 mL) was added The two layers were separated the aqueous layer was extracted with EtOAc (2×100 mL) The combined organic extracts were washed with H2O (2×100 mL) and saturated aqueous NaCl (100 mL) dried over MgSO4 concentrated in vacuo White crystals precipitated from the concentrated solution when most of the solvent was evaporated The residue was then treated with 20% EtOAc/hexane (100 mL) the resulting slurry was stirred at room temperature for 30 min The solids were collected by filtration washed with 20% EtOAc/hexane (2×50 mL) to afford the

反応条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

実験手順: A mixture of N-(carbobenzyloxy)-3-fluoroaniline (1.000 g, 4.08 mmol) in dry tetrahydrofuran (10 ml) is cooled with a dry ice/acetone bath to about -78° and then nbutyllithium (1.87 ml of a 1.6M mixture in hexanes, 2.91 mmol) is added. (R)-glycidyl butyrate (0.420 g or 0.413 ml, 2.91 mmol) is then added via syringe and the cooling bath allowed to dissipate overnight, with the reaction mixture reaching 20°-25°. The reaction mixture is quenched by the careful addition of saturated aqueous ammonium chloride, the entire mixture transferred to a separatory funnel with dichloromethane washings, and the mixture extracted with dichloromethane. The combined organic extracts are dried over sodium sulfate, filtered and concentrated under reduced pressure to give a concentrate which is purified by chromatography over silica gel, eluting with acetonitrile/chloroform (10/90) containing 1% methanol, to give the title compound. is cooled with a dry ice/acetone bath to about -78° reaching 20°-25° The reaction mixture is quenched by the careful addition of saturated aqueous ammonium chloride the entire mixture transferred to a separatory funnel with dichloromethane washings the mixture extracted with dichloromethane The combined organic extracts are dried over sodium sulfate filtered concentrated under reduced pressure to give a concentrate which is purified by chromatography over silica gel eluting with acetonitrile/chloroform (10/90) containing 1% methanol

反応条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

実験手順: A mixture of N-(carbobenzyloxy)-3-fluoroaniline (1.000 g, 4.08 mmol) in dry tetrahydrofuran (10 ml) is cooled with a dry ice/acetone bath to about -78° and then n-butyllithium (1.87 ml of a 1.6M mixture in hexanes, 2.91 mmol) is added. (R)-glycidyl butyrate (0.420 g or 0.413 ml, 2.91 mmol) is then added via syringe and the cooling bath allowed to dissipate overnight, with the reaction mixture reaching 20-25°. The reaction mixture is quenched by the careful addition of saturated aqueous ammonium chloride, the entire mixture transferred to a separatory funnel with dichloromethane washings, and the mixture extracted with dichloromethane. The combined organic extracts are dried over sodium sulfate, filtered and concentrated under reduced pressure to give a concentrate which is purified by chromatography over silica gel, eluting with acetonitrile/chloroform (10/90) containing 1% methanol, to give the title compound. is cooled with a dry ice/acetone bath to about -78° reaching 20-25° The reaction mixture is quenched by the careful addition of saturated aqueous ammonium chloride the entire mixture transferred to a separatory funnel with dichloromethane washings the mixture extracted with dichloromethane The combined organic extracts are dried over sodium sulfate filtered concentrated under reduced pressure to give a concentrate which is purified by chromatography over silica gel eluting with acetonitrile/chloroform (10/90) containing 1% methanol

反応条件: temp:-78.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

実験手順: A solution of amine 102 (39.2 g, 160.0 mmol) in anhydrous THF (300 mL) was cooled to −78° C. in a dry-ice/acetone bath before a solution of n-butyl lithium (n-BuLi, 2.5 M solution in hexane, 70.4 mL, 176 mmol, 1.1 equiv) was dropwise added under N2. The resulting reaction mixture was subsequently stirred at −78° C. for 1 h before a solution of (R)-(−)-glycidyl butyrate (25.37 g, 24.6 mL, 176 mmol, 1.1 equiv) in anhydrous THF (100 mL) was dropwise added into the reaction mixture at −78° C. under N2. The resulting reaction mixture was stirred at −78° C. for 30 min before being gradually warmed to room temperature for 12 h under N2. When TLC and HPLC/MS showed the reaction was complete, the reaction mixture was quenched with H2O (200 mL), and the resulting mixture was stirred at room temperature for 1 h before EtOAc (200 mL) was added. The two layers were separated, and the aqueous layer was extracted with EtOAc (2×100 mL). The combined organic extracts were washed with H2O (2×100 mL) and saturated aqueous NaCl (100 mL), dried over MgSO4, and concentrated in vacuo. White crystals precipitated from the concentrated solution when most of the solvent was evaporated. The residue was then treated with 20% EtOAc/hexane (100 mL) and the resulting slurry was stirred at room temperature for 30 min. The solids were collected by filtration and washed with 20% EtOAc/hexane (2×50 mL) to afford the desired (5R)-(3-(3-fluoro-phenyl)-5-hydroxymethyl-oxazolidin-2-one 103 (24.4 g, 72.3% yield) as white crystals. This product was directly used in subsequent reactions without further purification. 1H NMR (300 MHz, DMSO-d6) δ 3.34-3.72 (m, 2H), 3.83 (dd, 1H, J=6.2, 9.0 Hz), 4.09 (t, 111, J=12.0 Hz), 4.68-4.75 (m, 1H), 5.23 (t, 1H, J=5.6 Hz, OH), 6.96 (m, 1H), 7.32-7.56 (m, 3H). C10H10FNO3, LCMS (EI) m/e 212 (M++H). was dropwise added under N2 The resulting reaction mixture was dropwise added into the reaction mixture at −78° C. under N2 The resulting reaction mixture before being gradually warmed to room temperature for 12 h under N2 the reaction mixture was quenched with H2O (200 mL) the resulting mixture was stirred at room temperature for 1 h before EtOAc (200 mL) was added The two layers were separated the aqueous layer was extracted with EtOAc (2×100 mL) The combined organic extracts were washed with H2O (2×100 mL) and saturated aqueous NaCl (100 mL) dried over MgSO4 concentrated in vacuo White crystals precipitated from the concentrated solution when most of the solvent was evaporated The residue was then treated with 20% EtOAc/hexane (100 mL) the resulting slurry was stirred at room temperature for 30 min The solids were collected by filtration washed with 20% EtOAc/hexane (2×50 mL) to afford the

反応条件: temp:67.51; pressure:0.00; stir:; See reaction.notes.procedure_details.

実験手順: A solution of the crude regioisomeric mixture of (5R)-3-[2-Fluoro-4′-({[1-(4-methoxy-benzyl)-1H-[1,2,3]triazol-4-ylmethyl]-amino}-methyl)-biphenyl-4-yl]-5-[1,2,3]triazol-1-ylmethyl-oxazolidin-2-one (SC-167-71, 0.30 g, 0.528 mmol) in trifluoroacetic acid (TFA, 10 mL) was warmed up to 65-70° C., and the resulting reaction mixture was stirred at 65-70° C. for 12 h. When TLC and HPLC/MS showed that the deprotection reaction was complete, the solvents were removed in vacuo. The residual solids were then treated with ethyl acetate (EtOAc, 10 mL) and H2O (15 mL) before being treated with a saturated aqueous solution of sodium carbonate (30 mL) at room temperature. The resulting mixture was then stirred at room temperature for 1 h before the solids were collected by filtration, washed with EtOAc (2×20 mL) and H2O (2×20 mL), and dried in vacuo at 40-45° C. to afford the crude, (5R)-3-(2-Fluoro-4′-{[(1H-[1,2,3]triazol-4-ylmethyl)-amino]-methyl}-biphenyl-4-yl)-5-[1,2,3]triazol-1-ylmethyl-oxazolidin-2-one (Compound 2 as the free base, 0.18 g, 0.24 g theoretical, 75%) as off-white powders, which by HPLC/MS and 1H NMR was found to be one pure regioisomer. For Compound 2 as the free base: 1H NMR (300 MHz, DMSO-d6) δ 3.71-3.77 (two br. s, 4H, Ar1CH2NHCH2Ar2), 3.93-3.98 (m, 1H), 4.26-4.32 (t, 1H), 4.86 and 4.87 (d, 2H), 5.14-5.22 (m, 1H), 7.35-7.59 (m, 7H, aromatic-H), 7.74 and 7.78 (s, 2H, triazole-CH), 8.19 (s, 1H, triazole-CH); C22H21FN8O2, LCMS (EI) m/e 449 (M++H) and 471 (M++Na). the resulting reaction mixture When TLC and HPLC/MS showed that the deprotection reaction the solvents were removed in vacuo The residual solids were then treated with ethyl acetate (EtOAc, 10 mL) and H2O (15 mL) before being treated with a saturated aqueous solution of sodium carbonate (30 mL) at room temperature The resulting mixture was then stirred at room temperature for 1 h before the solids were collected by filtration washed with EtOAc (2×20 mL) and H2O (2×20 mL) dried in vacuo at 40-45° C.

反応条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

実験手順: A solution of the 3-fluoro-phenylamine (1015, 18.7 g, 168.3 mmol) in tetrahydrofuran (THF, 150 mL) was treated with potassium carbonate (K2CO3, 46.45 g, 336.6 mmol, 2.0 equiv) and H2O (150 mL) before a solution of benzyl chloroformate (CBZCl, 31.58 g, 185.1 mmol, 26.1 mL, 1.1 equiv) in THF (50 mL) was dropwise added into the reaction mixture at room temperature under N2. The resulting reaction mixture was stirred at room temperature for 2 h. When TLC showed that the reaction was complete, the reaction mixture was treated with H2O (100 mL) and ethyl acetate (EtOAc, 100 mL). The two layers were separated, and the aqueous layer was extracted with EtOAc (2×100 mL). The combined organic extracts were washed with H2O (2×100 mL) and saturated NaCl aqueous solution (100 mL), dried over MgSO4, and concentrated in vacuo. The residue was further dried in vacuo to afford the crude, desired (3-fluoro-phenyl)-carbamic acid benzyl ester (1016, 39.2 g, 41.23 g theoretical, 95%) as pale-yellow oil, which was found to be essentially pure and was directly used in the subsequent reactions without further purifications. For 1016: 1H NMR (300 MHz, CDCl3) δ 5.23 (s, 2H, OCH2Ph), 6.75-6.82 (m, 2H), 7.05 (dd, 1H, J=1.4, 8.2 Hz), 7.22-7.45 (m, 6H); C14H12FNO2, LCMS (EI) nm/e 246 (M++H). was dropwise added into the reaction mixture at room temperature under N2 The resulting reaction mixture The two layers were separated the aqueous layer was extracted with EtOAc (2×100 mL) The combined organic extracts were washed with H2O (2×100 mL) and saturated NaCl aqueous solution (100 mL) dried over MgSO4 concentrated in vacuo The residue was further dried in vacuo

反応条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

実験手順: A solution of the 3-fluoro-phenylamine (1015, 18.7 g, 168.3 mmol) in tetrahydrofuran (THF, 150 mL) was treated with potassium carbonate (K2CO3, 46.45 g, 336.6 mmol, 2.0 equiv) and H2O (150 mL) before a solution of benzyl chloroformate (CBZCl, 31.58 g, 185.1 mmol, 26.1 mL, 1.1 equiv) in THF (50 mL) was dropwise added into the reaction mixture at room temperature under N2. The resulting reaction mixture was stirred at room temperature for 2 h. When TLC showed that the reaction was complete, the reaction mixture was treated with H2O (100 mL) and ethyl acetate (EtOAc, 100 mL). The two layers were separated, and the aqueous layer was extracted with EtOAc (2×100 mL). The combined organic extracts were washed with H2O (2×100 mL) and saturated NaCl aqueous solution (100 mL), dried over MgSO4, and concentrated in vacuo. The residue was further dried in vacuo to afford the crude, (3-fluoro-phenyl)-carbamic acid benzyl ester (2, 39.2 g, 41.23 g theoretical, 95%) as pale-yellow oil, which was found to be essentially pure and was directly used in the subsequent reactions without further purifications. For 1016: 1H NMR (300 MHz, CDCl3) δ 5.23 (s, 2H, OCH2Ph), 6.75-6.82 (m, 2H), 7.05 (dd, 1H, J=1.4, 8.2 Hz), 7.22-7.45 (m, 6H); C14H12FNO2, LCMS (EI) m/e 246 (M++H). was dropwise added into the reaction mixture at room temperature under N2 The resulting reaction mixture The two layers were separated the aqueous layer was extracted with EtOAc (2×100 mL) The combined organic extracts were washed with H2O (2×100 mL) and saturated NaCl aqueous solution (100 mL) dried over MgSO4 concentrated in vacuo The residue was further dried in vacuo

反応条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

実験手順: A mixture of N-(carbobenzyloxy)-3-fluoroaniline (1.000 g, 4.08 mmol) in dry tetrahydrofuran (10 ml) is cooled with a dry ice/acetone bath to about -78° and then n-butyllithium (1.87 ml of a 1.6M mixture in hexanes, 2.91 mmol) is added. (R)-glycidyl butyrate (0.420 g or 0.413 ml, 2.91 mmol) is then added via syringe and the cooling bath allowed to dissipate overnight, with the reaction mixture reaching 20°-25°. The reaction mixture is quenched by the careful addition of saturated aqueous ammonium chloride, the entire mixture transferred to a separatory funnel with dichloromethane washings, and the mixture extracted with dichloromethane. The combined organic extracts are dried over sodium sulfate, filtered and concentrated under reduced pressure to give a concentrate which is purified by chromatography over silica gel, eluting with acetonitrile/chloroform (10/90) containing 1% methanol, to give the title compound. is cooled with a dry ice/acetone bath to about -78° reaching 20°-25° The reaction mixture is quenched by the careful addition of saturated aqueous ammonium chloride the entire mixture transferred to a separatory funnel with dichloromethane washings the mixture extracted with dichloromethane The combined organic extracts are dried over sodium sulfate filtered concentrated under reduced pressure to give a concentrate which is purified by chromatography over silica gel eluting with acetonitrile/chloroform (10/90) containing 1% methanol

反応条件: temp:67.51; pressure:0.00; stir:; See reaction.notes.procedure_details.

実験手順: A solution of the crude regioisomeric mixture of (5R)-3-[2-Fluoro-4′-({[1-(4-methoxy-benzyl)-1H-[1,2,3]triazol-4-ylmethyl]-amino}-methyl)-biphenyl-4-yl)-5-(1,2,3]triazol-1-ylmethyl-oxazolidin-2-one (SC-167-71, 0.30 g, 0.528 mmol) in trifluoroacetic acid (TFA, 10 mL) was warmed up to 65-70° C., and the resulting reaction mixture was stirred at 65-70° C. for 12 h. When TLC and HPLC/MS showed that the deprotection reaction was complete, the solvents were removed in vacuo. The residual solids were then treated with ethyl acetate (EtOAc, 10 mL) and H2O (15 mL) before being treated with a saturated aqueous solution of sodium carbonate (30 mL) at room temperature. The resulting mixture was then stirred at room temperature for 1 h before the solids were collected by filtration, washed with EtOAc (2×20 mL) and H2O (2×20 mL), and dried in vacuo at 40-45° C. to afford the crude, (5R)-3-(2-Fluoro-4′-{[(1H-[1,2,3]triazol-4-ylmethyl)-amino]-methyl}-biphenyl-4-yl)-5-[1,2,3]triazol-1-ylmethyl-oxazolidin-2-one (Compound 2 as the free base, 0.18 g, 0.24 g theoretical, 75%) as off-white powders, which by HPLC/MS and 1H NMR was found to be one pure regioisomer. For Compound 2 as the free base: 1H NMR (300 MHz, DMSO-d6) δ 3.71-3.77 (two br. s, 4H, Ar1CH2NHCH2Ar2), 3.93-3.98 (m, 1H), 4.26-4.32 (t, 1H), 4.86 and 4.87 (d, 2H), 5.14-5.22 (m, 1H), 7.35-7.59 (m, 7H, aromatic-H), 7.74 and 7.78 (s, 2H, triazole-CH), 8.19 (s, 1H, triazole-CH); C22H21FN8O2, LCMS (EI) m/e 449 (M++H) and 471 (M++Na). the resulting reaction mixture When TLC and HPLC/MS showed that the deprotection reaction the solvents were removed in vacuo The residual solids were then treated with ethyl acetate (EtOAc, 10 mL) and H2O (15 mL) before being treated with a saturated aqueous solution of sodium carbonate (30 mL) at room temperature The resulting mixture was then stirred at room temperature for 1 h before the solids were collected by filtration washed with EtOAc (2×20 mL) and H2O (2×20 mL) dried in vacuo at 40-45° C.

反応条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

実験手順: A solution of the 3-fluoro-phenylamine (1015, 18.7 g, 168.3 mmol) in tetrahydrofuran (THF, 150 mL) was treated with potassium carbonate (K2CO3, 46.45 g, 336.6 mmol, 2.0 equiv) and H2O (150 mL) before a solution of benzyl chloroformate (CBZCl, 31.58 g, 185.1 mmol, 26.1 mL, 1.1 equiv) in THF (50 mL) was dropwise added into the reaction mixture at room temperature under N2. The resulting reaction mixture was stirred at room temperature for 2 h. When TLC showed that the reaction was complete, the reaction mixture was treated with H2O (100 mL) and ethyl acetate (EtOAc, 100 mL). The two layers were separated, and the aqueous layer was extracted with EtOAc (2×100 mL). The combined organic extracts were washed with H2O (2×100 mL) and saturated NaCl aqueous solution (100 mL), dried over MgSO4, and concentrated in vacuo. The residue was further dried in vacuo to afford the crude, desired (3-fluoro-phenyl)-carbamic acid benzyl ester (1016, 39.2 g, 41.23 g theoretical, 95%) as pale-yellow oil, which was found to be essentially pure and was directly used in the subsequent reactions without further purifications. For 1016: 1H NMR (300 MHz, CDCl3) δ 5.23 (s, 2H, OCH2Ph), 6.75-6.82 (m, 2H), 7.05 (dd, 1H, J=1.4, 8.2 Hz), 7.22-7.45 (m, 6H); C14H12FNO2, LCMS (EI) m/e 246 (M++H). was dropwise added into the reaction mixture at room temperature under N2 The resulting reaction mixture The two layers were separated the aqueous layer was extracted with EtOAc (2×100 mL) The combined organic extracts were washed with H2O (2×100 mL) and saturated NaCl aqueous solution (100 mL) dried over MgSO4 concentrated in vacuo The residue was further dried in vacuo

反応条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

実験手順: A solution of the 3-fluoro-phenylamine (1015, 18.7 g, 168.3 mmol) in tetrahydrofuran (THF, 150 mL) was treated with potassium carbonate (K2CO3, 46.45 g, 336.6 mmol, 2.0 equiv) and H2O (150 mL) before a solution of benzyl chloroformate (CBZCl, 31.58 g, 185.1 mmol, 26.1 mL, 1.1 equiv) in THF (50 mL) was dropwise added into the reaction mixture at room temperature under N2. The resulting reaction mixture was stirred at room temperature for 2 h. When TLC showed that the reaction was complete, the reaction mixture was treated with H2O (100 mL) and ethyl acetate (EtOAc, 100 mL). The two layers were separated, and the aqueous layer was extracted with EtOAc (2×100 mL). The combined organic extracts were washed with H2O (2×100 mL) and saturated NaCl aqueous solution (100 mL), dried over MgSO4, and concentrated in vacuo. The residue was further dried in vacuo to afford the crude, (3-fluoro-phenyl)-carbamic acid benzyl ester (2, 39.2 g, 41.23 g theoretical, 95%) as pale-yellow oil, which was found to be essentially pure and was directly used in the subsequent reactions without further purifications. For 1016: 1H NMR (300 MHz, CDCl3) δ 5.23 (s, 2H, OCH2Ph), 6.75-6.82 (m, 2H), 7.05 (dd, 1H, J=1.4, 8.2 Hz), 7.22-7.45 (m, 6H); C14H12FNO2, LCMS (EI) m/e 246 (M++H). was dropwise added into the reaction mixture at room temperature under N2 The resulting reaction mixture The two layers were separated the aqueous layer was extracted with EtOAc (2×100 mL) The combined organic extracts were washed with H2O (2×100 mL) and saturated NaCl aqueous solution (100 mL) dried over MgSO4 concentrated in vacuo The residue was further dried in vacuo

反応条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

実験手順: A solution of the 3-fluoro-phenylamine (1015, 18.7 g, 168.3 mmol) in tetrahydrofuran (THF, 150 mL) was treated with potassium carbonate (K2CO3, 46.45 g, 336.6 mmol, 2.0 equiv) and H2O (150 mL) before a solution of benzyl chloroformate (CBZCl, 31.58 g, 185.1 mmol, 26.1 mL, 1.1 equiv) in THF (50 mL) was dropwise added into the reaction mixture at room temperature under N2. The resulting reaction mixture was stirred at room temperature for 2 h. When TLC showed that the reaction was complete, the reaction mixture was treated with H2O (100 mL) and ethyl acetate (EtOAc, 100 mL). The two layers were separated, and the aqueous layer was extracted with EtOAc (2×100 mL). The combined organic extracts were washed with H2O (2×100 mL) and saturated NaCl aqueous solution (100 mL), dried over MgSO4, and concentrated in vacuo. The residue was further dried in vacuo to afford the crude, (3-fluoro-phenyl)-carbamic acid benzyl ester (2, 39.2 g, 41.23 g theoretical, 95%) as pale-yellow oil, which was found to be essentially pure and was directly used in the subsequent reactions without further purifications. For 1016: 1H NMR (300 MHz, CDCl3) δ 5.23 (s, 2H, OCH2Ph), 6.75-6.82 (m, 2H), 7.05 (dd, 1H, J=1.4, 8.2 Hz), 7.22-7.45 (m, 6H); C14H12FNO2, LCMS (EI) m/e 246 (M++H). was dropwise added into the reaction mixture at room temperature under N2 The resulting reaction mixture The two layers were separated the aqueous layer was extracted with EtOAc (2×100 mL) The combined organic extracts were washed with H2O (2×100 mL) and saturated NaCl aqueous solution (100 mL) dried over MgSO4 concentrated in vacuo The residue was further dried in vacuo