diethyl 2-methyl-3-oxopentanedioate

反応条件: temp:85.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

実験手順: A mixture of 2-methyl-3-oxo-pentanedioic acid diethyl ester (10.0 g, 46.3 mmol), 1,1-diethoxy-ethene (12.8 mL, 92.5 mmol) and sodium methoxide (0.026 mg, 0.481 mmol) was heated to 85° C. for nine hours. The reaction mixture was cooled to room temperature and concentrated. To the resulting residue was added methylamine (1.91 mL, 55.5 mmol, 40% H2O). After stirring at room temperature for 16 hours, the reaction mixture was diluted with diethyl ether and washed with water. The aqueous phase was acidified to pH 1 with 10% HCl solution and extracted with EtOAc. The organic layer was dried (MgSO4) and concentrated. Trituration of the resulting residue with diethyl ether and flash column chromatography (3% MeOH in methylene chloride) gave 3.55 g (34%) desired product. The reaction mixture was cooled to room temperature concentrated washed with water extracted with EtOAc The organic layer was dried (MgSO4) concentrated

反応条件: temp:135.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

実験手順: Triethyl orthoformate (3.85 mL, 23.12 mmol) and acetic anhydride (4.37 mL, 46.25 mmol) were added to 2-methyl-3-oxo-pentanedioic acid diethyl ester (Caliskan et al Aust. J. Chem. 1999, 52 (11), 1013-1020) (5.0 g, 23.1 mmol) and the reaction mixture heated to 135° C. After 1 hour, the reaction mixture was cooled to room temperature and concentrated under reduced pressure. The residue was cooled to 0° C. and methylamine (40% in water, 5.0 mL, 57.81 mmol) was added with stirring. Water (20 mL) was added and the reaction mixture stirred for 16 hours. The reaction mixture was extracted with ethyl acetate and the aqueous layer acidified to pH 2 with 10% aqueous HCl. The acidified aqueous layer was extracted with ethyl acetate. The combined organic extracts were dried (MgSO4) and concentrated to give a solid. Trituration with diethyl ether yielded 4.88 g (55%) clean desired product. 4-Hydroxy-1,5-dimethyl-6-oxo-1,6-dihydropyridine-3-carboxylic acid ethyl ester was carried forward as described in Example 1, Steps B-D. MS APCI (−) m/z 353, 355 (M−, Br pattern) detected; 1H NMR (400 MHz, CD3OD) δ 8.49 (s, 1H), 7.36 (dd, 1H), 7.24 (dd, 1H), 6.71 (m, 1H), 3.60 (s, 3H), 1.68 (s, 3H). the reaction mixture was cooled to room temperature concentrated under reduced pressure The residue was cooled to 0° C. the reaction mixture stirred for 16 hours The reaction mixture was extracted with ethyl acetate The acidified aqueous layer was extracted with ethyl acetate The combined organic extracts were dried (MgSO4) concentrated to give a solid

反応条件: temp:85.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

実験手順: A mixture of 2-methyl-3-oxo-pentanedioic acid diethyl ester (10.0 g, 46.3 mmol), 1,1-diethoxy-ethene (12.8 mL, 92.5 mmol) and sodium methoxide (0.026 mg, 0.481 mmol) was heated to 85° C. for nine hours. The reaction mixture was cooled to room temperature and concentrated. To the resulting residue was added methylamine (1.91 mL, 55.5 mmol, 40% H2O). After stirring at room temperature for 16 hours, the reaction mixture was diluted with diethyl ether and washed with water. The aqueous phase was acidified to pH 1 with 10% HCl solution and extracted with EtOAc. The organic layer was dried (MgSO4) and concentrated. Trituration of the resulting residue with diethyl ether and flash column chromatography (3% MeOH in methylene chloride) gave 3.55 g (34%) desired product. The reaction mixture was cooled to room temperature concentrated washed with water extracted with EtOAc The organic layer was dried (MgSO4) concentrated

反応条件: temp:135.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

実験手順: Triethyl orthoformate (3.85 mL, 23.12 mmol) and acetic anhydride (4.37 mL, 46.25 mmol) were added to 2-methyl-3-oxo-pentanedioic acid diethyl ester (Caliskan et al Aust. J. Chem. 1999, 52 (11), 1013-1020) (5.0 g, 23.1 mmol) and the reaction mixture heated to 135° C. After 1 hour, the reaction mixture was cooled to room temperature and concentrated under reduced pressure. The residue was cooled to 0° C. and methylamine (40% in water, 5.0 mL, 57.81 mmol) was added with stirring. Water (20 mL) was added and the reaction mixture stirred for 16 hours. The reaction mixture was extracted with ethyl acetate and the aqueous layer acidified to pH 2 with 10% aqueous HCl. The acidified aqueous layer was extracted with ethyl acetate. The combined organic extracts were dried (MgSO4) and concentrated to give a solid. Trituration with diethyl ether yielded 4.88 g (55%) clean desired product. 4-Hydroxy-1,5-dimethyl-6-oxo-1,6-dihydropyridine-3-carboxylic acid ethyl ester was carried forward as described in Example 1, Steps B-D. MS APCI (−) m/z 353, 355 (M−, Br pattern) detected; 1H NMR (400 MHz, CD3OD) δ 8.49 (s, 1H), 7.36 (dd, 1H), 7.24 (dd, 1H), 6.71 (m, 1H), 3.60 (s, 3H), 1.68 (s, 3H). the reaction mixture was cooled to room temperature concentrated under reduced pressure The residue was cooled to 0° C. the reaction mixture stirred for 16 hours The reaction mixture was extracted with ethyl acetate The acidified aqueous layer was extracted with ethyl acetate The combined organic extracts were dried (MgSO4) concentrated to give a solid

反応条件: temp:120.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

実験手順: To a solution of diethyl 2-methyl-3-oxopentanedioate (10 g, 46.25 mmol) in 1,1′-trioxidanediyldipropan-1-one (400 mL) was added triethoxymethane (38 mL, 231.25 mmol), and the mixture was heated at 120° C. for 4 h, followed by the addition of 30% ammonia (600 mL) at 0° C. The reaction mixture was stirred at RT for another 2 h. LCMS monitored the reaction was completed. The precipitate was collected via filtration and dissolved in dichloromethane (400 mL). The solid was filtered off, and the filtrate was concentrated to get the title compound (5.5 g, crude) as a yellow solid. MS (ES+) C9H11NO4 requires: 197. found: 198 [M+H]+. The precipitate was collected via filtration dissolved in dichloromethane (400 mL) The solid was filtered off the filtrate was concentrated

反応条件: temp:120.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

実験手順: To a solution of diethyl 2-methyl-3-oxopentanedioate (10 g, 46.25 mmol) in 1,1′-trioxidanediyldipropan-1-one (400 mL) was added triethoxymethane (38 mL, 231.25 mmol), and the mixture was heated at 120° C. for 4 h, followed by the addition of 30% ammonia (600 mL) at 0° C. The reaction mixture was stirred at RT for another 2 h. LCMS monitored the reaction was completed. The precipitate was collected via filtration and dissolved in dichloromethane (400 mL). The solid was filtered off, and the filtrate was concentrated to get the title compound (5.5 g, crude) as a yellow solid. MS (ES+) C9H11NO4 requires: 197. found: 198 [M+H]+. The precipitate was collected via filtration dissolved in dichloromethane (400 mL) The solid was filtered off the filtrate was concentrated

反応条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

実験手順: To a solution of diethyl 3-oxopentanedioate (23.2 g, 114.8 mmol) in tetrahydrofuran (100 mL) was added sodium hydride (60%, 4.8 g, 120.5 mmol) at 0° C., and the reaction mixture was stirred at RT for 30 mins, followed by the addition of iodomethane (7.15 ml, 114.8 mmol). The reaction mixture was stirred at RT for 48 h, quenched with water (500 mL) and extracted with ethyl acetate (500 mL×3). The organic layers were separated, combined, washed with water (200 mL) and brine (200 mL), dried over sodium sulfate, filtered and concentrated. The residue was purified by silica gel column (petroleum ether: ethyl acetate=20:1) to get the title compound as a colorless oil (9 g, 36%). MS (ES+) C10H16O5 requires: 216. found: 217 [M+H]+. The reaction mixture was stirred at RT for 48 h quenched with water (500 mL) extracted with ethyl acetate (500 mL×3) The organic layers were separated washed with water (200 mL) and brine (200 mL) dried over sodium sulfate filtered concentrated The residue was purified by silica gel column (petroleum ether: ethyl acetate=20:1)

反応条件: temp:-15.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

実験手順: This compound was synthesized according to U.S. Pat. No. 6,833,471. To 20 mL of dry THF that had been purged with Ar(gas) was added diethyl 3-oxopentanedioate (5 mL, 27.54 mmol) and the solution was cooled to −15° C. prior to the dropwise addition of LDA (2M) (15 mL, 30 mmol). The reaction was maintained under Ar(gas) at −15° C., and MeI (3 mL, 48.2 mmol) was added slowly. The reaction was allowed to reach room temperature gradually over 3 hours, and the stirring was continued overnight. After 18 hours, the reaction mixture was poured into 140 mL of a 1:1 mixture of 0.5 N HCl (aq) and Et2O. The organic layer was separated, and the aqueous layer was extracted twice with Et2O (15 mL×2). The organic layers were combined, washed with brine, dried (MgSO4) and concentrated to give an yellow oil, which was flash chromatography purified (SiO2, Hexane:EtOAc=8:2 (v:v)) to afford a colorless/light yellow oil as the title compound. (1.37 g, 23% yield). MW m/z: 215.3 (MW−1, low intensity). 1H NMR (CDCl3, 300 Hz) δ ppm 4.20 (q, 4H), 3.68 (q, 1H), 3.60 (dd, 2H), 1.37 (d, 3H), 1.26 (t, 6H). This compound was synthesized To 20 mL of dry THF that had been purged with Ar(gas) The reaction was maintained under Ar(gas) at −15° C. the stirring was continued overnight After 18 hours The organic layer was separated the aqueous layer was extracted twice with Et2O (15 mL×2) washed with brine dried (MgSO4) concentrated to give an yellow oil, which purified (SiO2, Hexane:EtOAc=8:2 (v:v))

反応条件: temp:-15.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

実験手順: This compound was synthesized according to U.S. Pat. No. 6,833,471. To 20 mL of dry THF that had been purged with Ar(gas) was added diethyl 3-oxopentanedioate (5 mL, 27.54 mmol) and the solution was cooled to −15° C. prior to the dropwise addition of LDA (2M) (15 mL, 30 mmol). The reaction was maintained under Ar(gas) at −15° C., and MeI (3 mL, 48.2 mmol) was added slowly. The reaction was allowed to reach room temperature gradually over 3 hours, and the stirring was continued overnight. After 18 hours, the reaction mixture was poured into 140 mL of a 1:1 mixture of 0.5 N HCl (aq) and Et2O. The organic layer was separated, and the aqueous layer was extracted twice with Et2O (15 mL×2). The organic layers were combined, washed with brine, dried (MgSO4) and concentrated to give an yellow oil, which was flash chromatography purified (SiO2, Hexane:EtOAc=8:2 (v:v)) to afford a colorless/light yellow oil as the title compound. (1.37 g, 23% yield). MW m/z: 215.3 (MW−1, low intensity). 1H NMR (CDCl3, 300 Hz) δ ppm 4.20 (q, 4H), 3.68 (q, 1H), 3.60 (dd, 2H), 1.37 (d, 3H), 1.26 (t, 6H). This compound was synthesized To 20 mL of dry THF that had been purged with Ar(gas) The reaction was maintained under Ar(gas) at −15° C. the stirring was continued overnight After 18 hours The organic layer was separated the aqueous layer was extracted twice with Et2O (15 mL×2) washed with brine dried (MgSO4) concentrated to give an yellow oil, which purified (SiO2, Hexane:EtOAc=8:2 (v:v))

反応条件: temp:85.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

実験手順: A mixture of 2-methyl-3-oxo-pentanedioic acid diethyl ester (10.0 g, 46.3 mmol), 1,1-diethoxy-ethene (12.8 mL, 92.5 mmol) and sodium methoxide (0.026 mg, 0.481 mmol) was heated to 85° C. for nine hours. The reaction mixture was cooled to room temperature and concentrated. To the resulting residue was added methylamine (1.91 mL, 55.5 mmol, 40% H2O). After stirring at room temperature for 16 hours, the reaction mixture was diluted with diethyl ether and washed with water. The aqueous phase was acidified to pH 1 with 10% HCl solution and extracted with EtOAc. The organic layer was dried (MgSO4) and concentrated. Trituration of the resulting residue with diethyl ether and flash column chromatography (3% MeOH in methylene chloride) gave 3.55 g (34%) desired product. The reaction mixture was cooled to room temperature concentrated washed with water extracted with EtOAc The organic layer was dried (MgSO4) concentrated

反応条件: temp:135.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

実験手順: Triethyl orthoformate (3.85 mL, 23.12 mmol) and acetic anhydride (4.37 mL, 46.25 mmol) were added to 2-methyl-3-oxo-pentanedioic acid diethyl ester (Caliskan et al Aust. J. Chem. 1999, 52 (11), 1013-1020) (5.0 g, 23.1 mmol) and the reaction mixture heated to 135° C. After 1 hour, the reaction mixture was cooled to room temperature and concentrated under reduced pressure. The residue was cooled to 0° C. and methylamine (40% in water, 5.0 mL, 57.81 mmol) was added with stirring. Water (20 mL) was added and the reaction mixture stirred for 16 hours. The reaction mixture was extracted with ethyl acetate and the aqueous layer acidified to pH 2 with 10% aqueous HCl. The acidified aqueous layer was extracted with ethyl acetate. The combined organic extracts were dried (MgSO4) and concentrated to give a solid. Trituration with diethyl ether yielded 4.88 g (55%) clean desired product. 4-Hydroxy-1,5-dimethyl-6-oxo-1,6-dihydropyridine-3-carboxylic acid ethyl ester was carried forward as described in Example 1, Steps B-D. MS APCI (−) m/z 353, 355 (M−, Br pattern) detected; 1H NMR (400 MHz, CD3OD) δ 8.49 (s, 1H), 7.36 (dd, 1H), 7.24 (dd, 1H), 6.71 (m, 1H), 3.60 (s, 3H), 1.68 (s, 3H). the reaction mixture was cooled to room temperature concentrated under reduced pressure The residue was cooled to 0° C. the reaction mixture stirred for 16 hours The reaction mixture was extracted with ethyl acetate The acidified aqueous layer was extracted with ethyl acetate The combined organic extracts were dried (MgSO4) concentrated to give a solid

反応条件: temp:85.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

実験手順: A mixture of 2-methyl-3-oxo-pentanedioic acid diethyl ester (10.0 g, 46.3 mmol), 1,1-diethoxy-ethene (12.8 mL, 92.5 mmol) and sodium methoxide (0.026 mg, 0.481 mmol) was heated to 85° C. for nine hours. The reaction mixture was cooled to room temperature and concentrated. To the resulting residue was added methylamine (1.91 mL, 55.5 mmol, 40% H2O). After stirring at room temperature for 16 hours, the reaction mixture was diluted with diethyl ether and washed with water. The aqueous phase was acidified to pH 1 with 10% HCl solution and extracted with EtOAc. The organic layer was dried (MgSO4) and concentrated. Trituration of the resulting residue with diethyl ether and flash column chromatography (3% MeOH in methylene chloride) gave 3.55 g (34%) desired product. The reaction mixture was cooled to room temperature concentrated washed with water extracted with EtOAc The organic layer was dried (MgSO4) concentrated