prop-2-ynylcyclohexane

反応条件: temp:0.00; pressure:0.00; stir:

反応条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

実験手順: 2-Bromo-1,3-thiazole (2.0 g, 12 mmol) and CuI (185 mg, 0.97 mmol) were combined in DME (30 mL) and argon gas was bubbled through the suspension for several minutes to deoxygenate the mixture. Triethylamine (8.5 mL, 61 mmol) and PdCl2(PPh3)2 (340 mg, 0.49 mmol) were added and 3-cyclohexyl-1-propyne (2.9 g, 24 mmol) was added dropwise. The reaction was stirred at ambient temperature for 16 h at which time GC/MS analysis indicated that the reaction was complete. The mixture was filtered through Celite.™, and the filter pad was washed thoroughly with ethyl acetate. The combined filtrates were concentrated in vacuo. The residue was dissolved in ethyl acetate (300 mL), washed with water (300 mL), brine (300 mL), dried over Na2SO4, filtered, and concentrated in vacuo. The residue was purified by column chromatography eluting with hexane, then 98:2 hexane:ethyl acetate to afford 2-(3-cyclohexyl-1-propynyl)-1,3-thiazole (1.14 g, 46% yield) as a yellow oil. 1H NMR (CDCl3, 300 MHz) Δ7.76 (d, J=3.0 Hz, 1H), 7.27 (d, J=3.0 Hz, 1H), 2.35 (d, J=6 Hz, 2H), 1.89-1.61 (m, 5H), 1.3-1.03 (m, 6H). MS (ESI) 205.9 (M+H). argon gas was bubbled through the suspension for several minutes to deoxygenate the mixture The mixture was filtered through Celite ™, and the filter pad was washed thoroughly with ethyl acetate The combined filtrates were concentrated in vacuo The residue was dissolved in ethyl acetate (300 mL) washed with water (300 mL), brine (300 mL) dried over Na2SO4 filtered concentrated in vacuo The residue was purified by column chromatography eluting with hexane

反応条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

実験手順: 2-Bromo-1,3-thiazole (2.0 g, 12 mmol) and CuI (185 mg, 0.97 mmol) were combined in DME (30 mL) and argon gas was bubbled through the suspension for several minutes to deoxygenate the mixture. Triethylamine (8.5 mL, 61 mmol) and PdCl2(PPh3)2 (340 mg, 0.49 mmol) were added and 3-cyclohexyl-1-propyne (2.9 g, 24 mmol) was added dropwise. The reaction was stirred at ambient temperature for 16 h at which time GC/MS analysis indicated that the reaction was complete. The mixture was filtered through Celite.™, and the filter pad was washed thoroughly with ethyl acetate. The combined filtrates were concentrated in vacuo. The residue was dissolved in ethyl acetate (300 mL), washed with water (300 mL), brine (300 mL), dried over Na2SO4, filtered, and concentrated in vacuo. The residue was purified by column chromatography eluting with hexane, then 98:2 hexane:ethyl acetate to afford 2-(3-cyclohexyl-1-propynyl)-1,3-thiazole (1.14 g, 46% yield) as a yellow oil. 1H NMR (CDCl3, 300 MHz) Δ7.76 (d, J=3.0 Hz, 1H), 7.27 (d, J=3.0 Hz, 1H), 2.35 (d, J=6 Hz, 2H), 1.89-1.61 (m, 5H), 1.3-1.03 (m, 6H). MS (ESI) 205.9 (M+H). argon gas was bubbled through the suspension for several minutes to deoxygenate the mixture The mixture was filtered through Celite ™, and the filter pad was washed thoroughly with ethyl acetate The combined filtrates were concentrated in vacuo The residue was dissolved in ethyl acetate (300 mL) washed with water (300 mL), brine (300 mL) dried over Na2SO4 filtered concentrated in vacuo The residue was purified by column chromatography eluting with hexane

反応条件: temp:0.00; pressure:0.00; stir:

反応条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

実験手順: 2-Bromo-1,3-thiazole (2.0 g, 12 mmol) and CuI (185 mg, 0.97 mmol) were combined in DME (30 mL) and argon gas was bubbled through the suspension for several minutes to deoxygenate the mixture. Triethylamine (8.5 mL, 61 mmol) and PdCl2(PPh3)2 (340 mg, 0.49 mmol) were added and 3-cyclohexyl-1-propyne (2.9 g, 24 mmol) was added dropwise. The reaction was stirred at ambient temperature for 16 h at which time GC/MS analysis indicated that the reaction was complete. The mixture was filtered through Celite.™., and the filter pad was washed thoroughly with ethyl acetate. The combined filtrates were concentrated in vacuo. The residue was dissolved in ethyl acetate (300 mL), washed with water (300 mL), brine (300 mL), dried over Na2SO4, filtered, and concentrated in vacuo. The residue was purified by column chromatography eluting with hexane, then 98:2 hexane:ethyl acetate to afford 2-(3-cyclohexyl-1-propynyl)-1,3-thiazole (1.14 g, 46% yield) as a yellow oil. 1H NMR (CDCl3, 300 MHz) Δ7.76 (d, J=3.0 Hz, 1H), 7.27 (d, J=3.0 Hz, 1H), 2.35 (d, J=6 Hz, 2H), 1.89-1.61 (m, 5H), 1.3-1.03 (m, 6H). MS (ESI) 205.9 (M++H). argon gas was bubbled through the suspension for several minutes to deoxygenate the mixture The mixture was filtered through Celite , and the filter pad was washed thoroughly with ethyl acetate The combined filtrates were concentrated in vacuo The residue was dissolved in ethyl acetate (300 mL) washed with water (300 mL), brine (300 mL) dried over Na2SO4 filtered concentrated in vacuo The residue was purified by column chromatography eluting with hexane

反応条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

実験手順: To a solution of 3-cyclohexyl-1-propyne (145 μL, 1 mmol) in 2 mL dry THF at 0° C. was added 2 mL 0.5 M 9-BBN solution in THF. The resulting solution was stirred at room temperature under nitrogen for 4 hr. Then it was condensed under vacuum and used as boronic acid derivative according to general procedure G, reacting with 5-{3-[2-(4-bromo-benzyl)-4-(2,4-dichloro-phenyl)-imidazol-1-yl]-phenyl}-1,2,5-thiadiazolidine-3-one-1,1-dioxide (119 mg, 0.2 mmol) to give 5-{3-[2-[4-(3-cyclohexyl-propenyl)-benzyl]-4-(2,4-dichloro-phenyl)-imidazol-1-yl]-phenyl}-1,2,5-thiadiazolidine-3-one-1,1-dioxide. condensed under vacuum

反応条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

実験手順: To a solution of 3-cyclohexyl-1-propyne (145 μL, 1 mmol) in 2 mL dry THF at 0° C. was added 2 mL 0.5 M 9-BBN solution in THF. The resulting solution was stirred at room temperature under nitrogen for 4 hr. Then it was condensed under vacuum and used as boronic acid derivative according to general procedure G, reacting with 5-{3-[2-(4-bromo-benzyl)-4-(2,4-dichloro-phenyl)-imidazol-1-yl]-phenyl}-1,2,5-thiadiazolidine-3-one-1,1-dioxide (119 mg, 0.2 mmol) to give 5-{3-[2-[4-(3-cyclohexyl-propenyl)-benzyl]-4-(2,4-dichloro-phenyl)-imidazol-1-yl]-phenyl}-1,2,5-thiadiazolidine-3-one-1,1-dioxide. condensed under vacuum

反応条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

実験手順: To a solution of 3-cyclohexyl-1-propyne (145 μL, 1 mmol) in 2 mL dry THF at 0° C. was added 2 mL 0.5 M 9-BBN solution in THF. The resulting solution was stirred at room temperature under nitrogen for 4 hr. Then it was condensed under vacuum and used as boronic acid derivative according to general procedure G, reacting with 5-{3-[2-(4-bromo-benzyl)-4-(2,4-dichloro-phenyl)-imidazol-1-yl]-phenyl}-1,2,5-thiadiazolidine-3-one-1,1-dioxide (119 mg, 0.2 mmol) to give 5-{3-[2-[4-(3-cyclohexyl-propenyl)-benzyl]-4-(2,4-dichloro-phenyl)-imidazol-1-yl]-phenyl}-1,2,5-thiadiazolidine-3-one-1,1-dioxide. condensed under vacuum

反応条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

実験手順: To a solution of 3-cyclohexyl-1-propyne (145 μL, 1 mmol) in 2 mL dry THF at 0° C. was added 2 mL 0.5 M 9-BBN solution in THF. The resulting solution was stirred at room temperature under nitrogen for 4 hr. Then it was condensed under vacuum and used as boronic acid derivative according to general procedure G, reacting with 5-{3-[2-(4-bromo-benzyl)-4-(2,4-dichloro-phenyl)-imidazol-1-yl]-phenyl}-1,2,5-thiadiazolidine-3-one-1,1-dioxide (119 mg, 0.2 mmol) to give 5-{3-[2-[4-(3-cyclohexyl-propenyl)-benzyl]-4-(2,4-dichloro-phenyl)-imidazol-1-yl]-phenyl}-1,2,5-thiadiazolidine-3-one-1,1-dioxide. condensed under vacuum

反応条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

実験手順: 2-Bromo-1,3-thiazole (2.0 g, 12 mmol) and CuI (185 mg, 0.97 mmol) were combined in DME (30 mL) and argon gas was bubbled through the suspension for several minutes to deoxygenate the mixture. Triethylamine (8.5 ml, 61 mmol) and PdCl2(PPh3)2 (340 mg, 0.49 mmol) were added and 3-cyclohexyl-1-propyne (2.9 g, 24 mmol) was added dropwise. The reaction was stirred at ambient temperature for 16 h at which time GC/MS analysis indicated that the reaction was complete. The mixture was filtered through Celite™, and the filter pad was washed thoroughly with ethyl acetate. The combined filtrates were concentrated in vacuo. The residue was dissolved in ethyl acetate (300 mL), washed with water (300 mL), brine (300 mL), dried over Na2SO4, filtered, and concentrated in vacuo. The residue was purified by column chromatography eluting with hexane, then 98:2 hexane:ethyl acetate to afford 2-(3-cyclohexyl-1-propynyl)-1,3-thiazole (1.14 g, 46% yield) as a yellow oil. 1H NMR (CDCl3, 300 MHz) δ 7.76 (d, J=3.0 Hz, 1H), 7.27 (d, J=3.0 Hz, 1H), 2.35 (d, J=6 Hz, 2H), 1.89-1.61 (m, 5H), 1.3-1.03 (m, 6H). MS (ESI) 205.9 (M++H). argon gas was bubbled through the suspension for several minutes to deoxygenate the mixture The mixture was filtered through Celite™ the filter pad was washed thoroughly with ethyl acetate The combined filtrates were concentrated in vacuo The residue was dissolved in ethyl acetate (300 mL) washed with water (300 mL), brine (300 mL) dried over Na2SO4 filtered concentrated in vacuo The residue was purified by column chromatography eluting with hexane

反応条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

実験手順: 2-Bromo-5-(2-trimethylsilanyl-ethoxymethyl)-5H-pyrrolo[2,3-b]pyrazine (402 mg, 1.22 mmol) and 3-cyclohexyl-1-propyne (745 mg, 6.1 mmol) were reacted under the same conditions as described in example 4 above. The crude product was adsorbed onto silica (1.5 g) and purified by silica gel chromatography, eluting with 5% to 20% ethyl acetate in hexanes to afford 395 mg of 2-(3-cyclohexyl-prop-1-ynyl)-5-(2-trimethylsilanyl-ethoxymethyl)-5H-pyrrolo[2,3-b]pyrazin as a light brown semi-mobile oil. MS (M+H)+=370. purified by silica gel chromatography eluting with 5% to 20% ethyl acetate in hexanes

反応条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

実験手順: A gold (Ag(I)) catalyst {[Au(JohnPhos)NCCH3]|SbF6—} [JohnPhos:(2-biphenyl)di-tert-butylphosphine] (11.3 mg, 0.015 mmol) was put into a reaction container, and dichloroethane (0.4 mL) was put thereinto. After stirring at room temperature for 5 minutes, ethyl hydrogen p-tolylethynylphosphonate (67.3 mg, 0.3 mmol) diluted with 0.5 mL of dichloroethane was added thereto, and finally, prop-2-ynylcyclohexane (73.2 mg, 0.6 mmol) was put thereinto. Then, when all of the starting materials disappeared in the TLC, the reaction was allowed to be completed. After the solvent was removed under low atmospheric pressure, the product was separated by chromatography to obtain 2-ethoxy-4-p-tolyl-6-(cyclohexylmethyl)-1,2-oxaphosphorin 2-oxide (66.5 mg, 64%) which is a title compound. was added After the solvent was removed under low atmospheric pressure the product was separated by chromatography