1,1,1,2,3-pentachloropropane

反応条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

実験手順: The overhead stream comprising 1,2,3-trichloropropane, TCPE, tetrachloropropanes, 1,1,2,2,3-pentachloropropane, 1,1,1,2,3-pentachloropropane, and 1,1,1,2,2-pentachloropropane is then provided to a reactor where it is dehydrochlorinated to provide dichloropropenes, trichloropropenes, 2,3,3,3-tetrachloropropene, and 1,1,2,3-tetrachloropropene. More specifically, dehydrochlorination reactor may typically be a batch or a continuous stirred tank reactor. The mixing can be done, e.g., by mechanical or jet mixing of feed streams. Those of ordinary skill in the art are readily able to determine the appropriate conditions at which to run a dehydrochlorination reactor in order to conduct the aforementioned dehydrochlorination. is then provided to a reactor where it

反応条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

実験手順: An earlier reference by Haszeldine, "Fluoro-olefins. Part II. Synthesis and Reaction of Some 3,3,3-Trihalogenopropenes" Journal of the Chemical Society [1953] pp. 3371-3378, describes a plethora of reactions of products derived from 1,1,1,3-tetrachloropropane. The reference describes preparation of this intermediate by reaction of carbon tetrachloride with ethylene in the presence of benzoyl peroxide. Among the numerous syntheses carried out by Haszeldine with 1,1,1,3-tetrachloropropane as the starting material are: dehydrochlorination of this starting material with 10% ethanolic potassium hydroxide to produce a mixture of 3,3,3- and 1,1,3-trichloropropene; isomerization of 3,3,3-trichloropropene to 1,1,3-trichloropropene using a variety of allylic rearrangement catalysts including antimony fluoride, concentrated hydrochloric acid, concentrated sulfuric acid, aluminum chloride, ferric chloride, ethanolic KOH and anhydrous hydrogen fluoride; chlorination of 1,1,3-trichloropropene in the presence of light to produce 1,1,1,2,3-pentachloropropane; chlorination of 3,3,3-trichloropropene to produce 1,1,1,2,3-pentachloropropane; dehydrochlorination of 1,1,1,2,3-pentachloropropane with ethanolic potassium hydroxide to produce a mixture of 2,3,3,3-tetrachloropropene and 1,1,2,3-tetrachloropropene; separation of 2,3,3,3-tetrachloropropene from 1,1,2,3-tetrachloropropene by distillation; and isomerization of 2,3,3,3-tetrachloropropene in the presence of aluminum chloride to produce 1,1,2,3-tetrachloropropene in 51% yield. Alternatively, Haszeldine discloses thermal isomerization of 2,3,3,3-tetrachloropropene to 1,1,2,3 tetrachloropropene at 180° C. in 45% yield. Based on the yields reported by Haszeldine for the above described series of steps, the overall yield obtained with his syntheses can be computed as 41.8% based on 1,1,1,3-tetrachloropropane, 10.4% based on carbon tetrachloride.

反応条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

実験手順: Chlorine conversion was 98%; 1,1,1,3-tetrachloropropane conversion was 97%. The yields of 1,1,3-trichloropropene, 1,1,1,2,3-pentachloropropane, and 1,1,2,3-tetrachloropropene on 1,1,1,3-tetrachloropropane fed were 2.7, 85, and 5.7 percent, respectively. The yield of the usual four undesired prominent high-boiling byproducts was 2.2 wt % in the reactor effluent.

反応条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

実験手順: Chlorine conversion was 98%; 1,1,1,3-tetrachloropropane conversion was 97%. The yields of 1,1,3-trichloropropene, 1,1,1,2,3-pentachloropropane, and 1,1,2,3-tetrachloropropene on 1,1,1,3-tetrachloropropane fed were 2.7, 85, and 5.7 percent, respectively. The yield of the usual four undesired prominent high-boiling byproducts was 2.2 wt % in the reactor effluent.

反応条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

実験手順: Chlorine conversion was 97%; 1,1,1,3-tetrachloropropane conversion was 99%. The yields of 1,1,3-trichloropropene, 1,1,1,2,3-pentachloropropane, and 1,1,2,3-tetrachloropropene on 1,1,1,3-tetrachloropropane fed were 3.7, 76.7, and 7.6 percent, respectively. The yield of the usual four undesired prominent high-boiling byproducts was 6.3 wt % in the reactor effluent. Comparison of this experiment with Example 8 shows a significant advantage for the feedstock containing 15.7 wt % carbon tetrachloride.

反応条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

実験手順: Chlorine conversion was 99%; 1,1,1,3-tetrachloropropane conversion was 99%. The yields of 1,1,3-trichloropropene, 1,1,1,2,3-pentachloropropane, and 1,1,2,3-tetrachloropropene on 1,1,1,3-tetrachloropropane fed were 3.4, 82.9, and 8.1 percent, respectively. The yield of the same four undesired prominent high-boiling byproducts was 4.2 wt % in the reactor effluent.

反応条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

実験手順: Chlorine conversion was 99%; 1,1,1,3-tetrachloropropane conversion was 99%. The yields of 1,1,3-trichloropropene, 1,1,1,2,3-pentachloropropane, and 1,1,2,3-tetrachloropropene on 1,1,1,3-tetrachloropropane fed were 2.0, 85, and 5.8 percent, respectively. The total yield of four prominent high-boiling byproducts was 3.3 wt % in the reactor effluent. These byproducts are believed to be hexachloropropane, two pentachlorohexene isomers, and hexachlorohexadiene.

反応条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

実験手順: Chlorine conversion was 99%; 1,1,1,3-tetrachloropropane conversion was 99%. The yields of 1,1,3-trichloropropene, 1,1,1,2,3-pentachloropropane, and 1,1,2,3-tetrachloropropene on 1,1,1,3-tetrachloropropane fed were 2.0, 85, and 5.8 percent, respectively. The total yield of four prominent high-boiling byproducts was 3.3 wt % in the reactor effluent. These byproducts are believed to be hexachloropropane, two pentachlorohexene isomers, and hexachlorohexadiene.

反応条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

実験手順: The overhead stream comprising 1,2,3-trichloropropane, TCPE, tetrachloropropanes, 1,1,2,2,3-pentachloropropane, 1,1,1,2,3-pentachloropropane, and 1,1,1,2,2-pentachloropropane is then provided to a reactor where it is dehydrochlorinated to provide dichloropropenes, trichloropropenes, 2,3,3,3-tetrachloropropene, and 1,1,2,3-tetrachloropropene. More specifically, dehydrochlorination reactor may typically be a batch or a continuous stirred tank reactor. The mixing can be done, e.g., by mechanical or jet mixing of feed streams. Those of ordinary skill in the art are readily able to determine the appropriate conditions at which to run a dehydrochlorination reactor in order to conduct the aforementioned dehydrochlorination. is then provided to a reactor where it

反応条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

実験手順: An earlier reference by Haszeldine, "Fluoro-olefins. Part II. Synthesis and Reaction of Some 3,3,3-Trihalogenopropenes" Journal of the Chemical Society [1953] pp. 3371-3378, describes a plethora of reactions of products derived from 1,1,1,3-tetrachloropropane. The reference describes preparation of this intermediate by reaction of carbon tetrachloride with ethylene in the presence of benzoyl peroxide. Among the numerous syntheses carried out by Haszeldine with 1,1,1,3-tetrachloropropane as the starting material are: dehydrochlorination of this starting material with 10% ethanolic potassium hydroxide to produce a mixture of 3,3,3- and 1,1,3-trichloropropene; isomerization of 3,3,3-trichloropropene to 1,1,3-trichloropropene using a variety of allylic rearrangement catalysts including antimony fluoride, concentrated hydrochloric acid, concentrated sulfuric acid, aluminum chloride, ferric chloride, ethanolic KOH and anhydrous hydrogen fluoride; chlorination of 1,1,3-trichloropropene in the presence of light to produce 1,1,1,2,3-pentachloropropane; chlorination of 3,3,3-trichloropropene to produce 1,1,1,2,3-pentachloropropane; dehydrochlorination of 1,1,1,2,3-pentachloropropane with ethanolic potassium hydroxide to produce a mixture of 2,3,3,3-tetrachloropropene and 1,1,2,3-tetrachloropropene; separation of 2,3,3,3-tetrachloropropene from 1,1,2,3-tetrachloropropene by distillation; and isomerization of 2,3,3,3-tetrachloropropene in the presence of aluminum chloride to produce 1,1,2,3-tetrachloropropene in 51% yield. Alternatively, Haszeldine discloses thermal isomerization of 2,3,3,3-tetrachloropropene to 1,1,2,3 tetrachloropropene at 180° C. in 45% yield. Based on the yields reported by Haszeldine for the above described series of steps, the overall yield obtained with his syntheses can be computed as 41.8% based on 1,1,1,3-tetrachloropropane, 10.4% based on carbon tetrachloride.

反応条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

実験手順: Chlorine conversion was 98%; 1,1,1,3-tetrachloropropane conversion was 97%. The yields of 1,1,3-trichloropropene, 1,1,1,2,3-pentachloropropane, and 1,1,2,3-tetrachloropropene on 1,1,1,3-tetrachloropropane fed were 2.7, 85, and 5.7 percent, respectively. The yield of the usual four undesired prominent high-boiling byproducts was 2.2 wt % in the reactor effluent.

反応条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

実験手順: Chlorine conversion was 98%; 1,1,1,3-tetrachloropropane conversion was 97%. The yields of 1,1,3-trichloropropene, 1,1,1,2,3-pentachloropropane, and 1,1,2,3-tetrachloropropene on 1,1,1,3-tetrachloropropane fed were 2.7, 85, and 5.7 percent, respectively. The yield of the usual four undesired prominent high-boiling byproducts was 2.2 wt % in the reactor effluent.