(E)-3-(4-methoxyphenyl)prop-2-enal

反応条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

実験手順: DBU (7.5 mg, 0.05 mmol) was added under argon to a solution of (E)-4-methoxycinnamaldehyde (162 mg, 1 mmol), nitrosobenzene (107 mg, 1 mmol) and catalyst (18.2 mg, 0.05 mmol) in dichloromethane (5 mL). The reaction mixture was stirred at room temperature for 10 min. The solvent was removed under vacuum, and the residue was purified by flash silica gel column chromatography using hexane and ethyl acetate as the eluents. The solvent was removed under vacuum the residue was purified by flash silica gel column chromatography

反応条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

実験手順: [Ir(cod)Cl]2, O,O′-(R)-(1,1′-Dinaphthyl-2,2′-diyl)-N,N′-di-(R,R)-phenylethylphosphoramidite were prepared according to published procedures (Herde, J. L.; Lambert, J. C.; Senoff, C. V. Inorg. Synth. 1974, 15, 18; Alexakis, A.; Rosset, S.; Allamand, J.; March, S.; Guillen, F.; Benhaim, C. Synlett 2001, 1375). Lithium aryloxides were prepared by reaction of the corresponding phenols with n-BuLi in THF at 0° C. After being stirred for 10 min at room temperature, the solution was concentrated under vacuum to afford the corresponding lithium aryloxides as white powders, which were stored under inert atmosphere. All allylic carbonates were synthesized by the reaction of the corresponding allylic alcohols with the corresponding alkylchloroformate in the presence of pyridine. (E)-4-Methoxycinnamamyl alcohol and (E)-2-methoxycinnamyl alcohol were prepared by the reduction of the corresponding aldehydes with DIBAL-H (Nung Min, Y.; Young Soo, G. J. Org. Chem. 1985, 50, 2443). Phenols, (E)-4-methoxycinnamaldehyde, and (E)-2-methoxycinnamaldehyde were purchased from Aldrich Chemicals Co. and used without further purification. and used without further purification

反応条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

実験手順: [Ir(cod)Cl]2, O,O′-(R)-(1,1′-Dinaphthyl-2,2′-diyl)-N,N′-di-(R,R)-phenylethylphosphoramidite were prepared according to published procedures (Herde, J. L.; Lambert, J. C.; Senoff, C. V. Inorg. Synth. 1974, 15, 18; Alexakis, A.; Rosset, S.; Allamand, J.; March, S.; Guillen, F.; Benhaim, C. Synlett 2001, 1375). Lithium aryloxides were prepared by reaction of the corresponding phenols with n-BuLi in THF at 0° C. After being stirred for 10 min at room temperature, the solution was concentrated under vacuum to afford the corresponding lithium aryloxides as white powders, which were stored under inert atmosphere. All allylic carbonates were synthesized by the reaction of the corresponding allylic alcohols with the corresponding alkylchloroformate in the presence of pyridine. (E)-4-Methoxycinnamamyl alcohol and (E)-2-methoxycinnamyl alcohol were prepared by the reduction of the corresponding aldehydes with DIBAL-H (Nung Min, Y.; Young Soo, G. J. Org. Chem. 1985, 50, 2443). Phenols, (E)-4-methoxycinnamaldehyde, and (E)-2-methoxycinnamaldehyde were purchased from Aldrich Chemicals Co. and used without further purification. and used without further purification

反応条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

実験手順: The compound was prepared according to the procedure described in Example 84 except that the reaction was worked up after 3 days. The following reagents were used: 4-methoxybenzaldehyde (13.5 g), diisopropylamine (32.2 mL). 1.6M n-butyl lithium in hexane (143 mL), acetaldehyde N-tert-butylimine (14.75 mL), diethyl chlorophosphonate (16.6 mL) and tetrahydrofuran (200 mL). The work up, varied only in that the oxalic acid catalyzed hydrolysis was done overnight at room temperature and then at 85° C. for 2 hours, furnished 12.5 g of crude product which was crystallized from ether-hexane to yield 10 g of (E)-3-(4-methoxyphenyl)-2-propenal, mp 58.5°-60° C. The compound was prepared hydrolysis was done overnight at room temperature at 85° C. for 2 hours furnished 12.5 g of crude product which was crystallized from ether-hexane

反応条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

実験手順: Under ice-cooling, sodium hydride (4.65 g, content 60%) was added in small portions to a THF solution (300 ml) containing (2E)-3-(4-methoxyphenyl)acrylaldehyde (10 g) synthesized by the process described in Reference Example 1 and ethyl 2-(diethoxyphosphoryl)-3-oxo-3,4-dihydro-2H-1,4-benzothiazine-6-carboxylate (21.7 g, synthesized according to the process disclosed in WO00/63197). The resulting mixture was slowly warmed up to room temperature and stirred overnight. The same aldehyde as above (1.5 g) was added thereto and stirred for another 2 hours. The resulting mixture was concentrated under reduced pressure, and ethyl acetate (30 ml), hexane (100 ml), a 1N aqueous hydrochloric acid solution (50 ml) and water (600 ml) were added to the residue, followed by stirring at room temperature for 6 hours. The solid was collected by filtration and dried under reduced pressure. Ethyl 2-[3-(4-methoxyphenyl)prop-2-en-1-ylidene]-3-oxo-3,4-dihydro-2H-1,4-benzothiazine-6-carboxylate (22.43 g) was obtained as a yellow solid. Under ice-cooling synthesized by the process synthesized stirred for another 2 hours The resulting mixture was concentrated under reduced pressure, and ethyl acetate (30 ml), hexane (100 ml) a 1N aqueous hydrochloric acid solution (50 ml) and water (600 ml) were added to the residue by stirring at room temperature for 6 hours The solid was collected by filtration dried under reduced pressure

反応条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

実験手順: A mixture of potassium tert-butoxide (5.54 g, 49.3 mmol) in DMSO (20 mL) was added to a mixture of (E)-3-(4-methoxyphenyl)acrylaldehyde (2.0 g, 12.33 mmol) and 2-cyanoacetamide (1.140 g, 13.56 mmol) in DMSO (30 mL) dropwise under an oxygen balloon with a water bath cooling outside. After completion of addition, the mixture was stirred under oxygen for 1 h at room temperature, quenched with water (100 mL) and adjusted to pH 5-6 with careful addition of 1 N HCl. A brown precipitate was formed, collected by filtration, washed with water (2×50 mL), dried under vacuum to give 4-(4-methoxyphenyl)-2-oxo-1,2-dihydropyridine-3-carbonitrile (1.0 g, 36% yield). 1H NMR (500 MHz, DMSO-d6) δ ppm 7.69 (1H, δ, J=6.60 Hz), 7.62 (2H, δ, J=8.80 Hz), 7.11 (2H, δ, J=8.80 Hz), 639 (1H, δ, J=6.60 Hz), 3.87 (3H, s); MS (ES+) m/z: 227 (M+H); LC retention time: 2.532 min (analytical HPLC Method A). cooling outside After completion of addition quenched with water (100 mL) adjusted to pH 5-6 with careful addition of 1 N HCl A brown precipitate was formed collected by filtration washed with water (2×50 mL) dried under vacuum

反応条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

実験手順: Prepared according to the general procedure using (Z)-4-benzylidene-2-(2,5-difluorophenyl)-1H-imidazol-5(4H)-one and (E)-3-(4-methoxyphenyl)acrylaldehyde. The unpurified residue was purified by flash chromatography using 15% EtOAc/hexanes to afford 9 as an off-white solid (102 mg, 76%). Analytical data for 9: 1H NMR (500 MHz, CDCl3) δ 9.38 (d, J=8.1 Hz, 1H), 7.89 (ddd, J=9.2, 6.1, 3.2 Hz, 1H), 7.39-7.29 (m, 3H), 7.10-6.93 (m, 6H), 6.88-6.83 (m, 2H), 4.09 (d, J=6.8 Hz, 1H), 3.81 (s, 3H), 3.55 (ddd, J=10.1, 6.8, 4.6 Hz, 1H), 3.29 (dd, J=14.9, 4.6 Hz, 1H), 2.38 (dd, J=14.9, 10.1 Hz, 1H); 13C NMR (CDCl3, 126 MHz) δ 169.0, 159.1 (d, JCF=243.6 Hz), 158.4, 155.4 (d, JCF=241.1 Hz), 148.9, 137.1, 136.3, 130.0, 129.7, 129.2, 128.3, 128.0, 118.4 (dd, JCF=12.3, 9.5 Hz), 117.1 (dd, JCF=25.7, 8.7 Hz), 116.5 (dd, JCF=24.7, 9.5 Hz), 114.0, 114.5 (dd, JCF=26.8, 3.7 Hz), 111.0 (d, JCF=3.8 Hz), 55.3, 47.5, 38.3, 31.8; IR (film) cm−1 1772, 1617, 1528, 1513, 1481, 1464 1249, 1176, 1118, 1100, 1033, 766, 735, 700; LRMS (ESI): Mass calcd for [M+H]+ C26H21F2N2O3: 447.1. found 447.4; Enantiomeric ratio was measured by chiral phase HPLC (Chiralcel OD-H; 5% IPA/3% MeOH/hexanes 0.5 mL/min, 280 nm), Rt1 (major)=48.1, Rt2 (minor)=56.9 min; er=99:1. Prepared The unpurified residue was purified by flash chromatography

反応条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

実験手順: Under ice-cooling, sodium hydride (4.65 g, content 60%) was added in small portions to a THF solution (300 ml) containing (2E)-3-(4-methoxyphenyl)acrylaldehyde (10 g) synthesized by the process described in Reference Example 1 and ethyl 2-(diethoxyphosphoryl)-3-oxo-3,4-dihydro-2H-1,4-benzothiazine-6-carboxylate (21.7 g, synthesized according to the process disclosed in WO00/63197). The resulting mixture was slowly warmed up to room temperature and stirred overnight. The same aldehyde as above (1.5 g) was added thereto and stirred for another 2 hours. The resulting mixture was concentrated under reduced pressure, and ethyl acetate (30 ml), hexane (100 ml), a 1N aqueous hydrochloric acid solution (50 ml) and water (600 ml) were added to the residue, followed by stirring at room temperature for 6 hours. The solid was collected by filtration and dried under reduced pressure. Ethyl 2-[3-(4-methoxyphenyl)prop-2-en-1-ylidene]-3-oxo-3,4-dihydro-2H-1,4-benzothiazine-6-carboxylate (22.43 g) was obtained as a yellow solid. Under ice-cooling synthesized by the process synthesized stirred for another 2 hours The resulting mixture was concentrated under reduced pressure, and ethyl acetate (30 ml), hexane (100 ml) a 1N aqueous hydrochloric acid solution (50 ml) and water (600 ml) were added to the residue by stirring at room temperature for 6 hours The solid was collected by filtration dried under reduced pressure

反応条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

実験手順: The compound was prepared according to the procedure described in Example 84 except that the reaction was worked up after 3 days. The following reagents were used: 4-methoxybenzaldehyde (13.5 g). diisopropylamine (32.2 mL), 1.6M n-butyl lithium in hexane (143 mL), acetaldehyde N-tert-butylimine (14.75 mL), diethyl chlorophosphonate (16.6 mL) and tetrahydrofuran (200 mL). The work up, varied only in that the oxalic acid catalyzed hydrolysis was done overnight at room temperature and then at 85° C. for 2 hours, furnished 12.5 g of crude product which was crystallized from ether-hexane to yield 10 g of (E)-3-(4-methoxyphenyl)-2-propenal, mp 58.5°-60° C. The compound was prepared hydrolysis was done overnight at room temperature at 85° C. for 2 hours furnished 12.5 g of crude product which was crystallized from ether-hexane

反応条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

実験手順: DBU (7.5 mg, 0.05 mmol) was added under argon to a solution of (E)-4-methoxycinnamaldehyde (162 mg, 1 mmol), nitrosobenzene (107 mg, 1 mmol) and catalyst (18.2 mg, 0.05 mmol) in dichloromethane (5 mL). The reaction mixture was stirred at room temperature for 10 min. The solvent was removed under vacuum, and the residue was purified by flash silica gel column chromatography using hexane and ethyl acetate as the eluents. The solvent was removed under vacuum the residue was purified by flash silica gel column chromatography

反応条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

実験手順: [Ir(cod)Cl]2, O,O′-(R)-(1,1′-Dinaphthyl-2,2′-diyl)-N,N′-di-(R,R)-phenylethylphosphoramidite were prepared according to published procedures (Herde, J. L.; Lambert, J. C.; Senoff, C. V. Inorg. Synth. 1974, 15, 18; Alexakis, A.; Rosset, S.; Allamand, J.; March, S.; Guillen, F.; Benhaim, C. Synlett 2001, 1375). Lithium aryloxides were prepared by reaction of the corresponding phenols with n-BuLi in THF at 0° C. After being stirred for 10 min at room temperature, the solution was concentrated under vacuum to afford the corresponding lithium aryloxides as white powders, which were stored under inert atmosphere. All allylic carbonates were synthesized by the reaction of the corresponding allylic alcohols with the corresponding alkylchloroformate in the presence of pyridine. (E)-4-Methoxycinnamamyl alcohol and (E)-2-methoxycinnamyl alcohol were prepared by the reduction of the corresponding aldehydes with DIBAL-H (Nung Min, Y.; Young Soo, G. J. Org. Chem. 1985, 50, 2443). Phenols, (E)-4-methoxycinnamaldehyde, and (E)-2-methoxycinnamaldehyde were purchased from Aldrich Chemicals Co. and used without further purification. and used without further purification