4-prop-2-ynoxyphenol

反応条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

実験手順: By utilizing the procedure of Example 1, by reacting hydroquinone monopropargyl ether with 3-methyl-2-butenyl bromide, there is obtained 1-[(3-methyl-2-butenyl)oxy]-4-propargyloxy-benzene; B.P. 145°-148°C/1 mmHg.

反応条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

実験手順: By utilizing the procedure of Example 1, by reacting hydroquinone monopropargyl ether with 3-methyl-2-butenyl bromide, there is obtained 1-[(3-methyl-2-butenyl)oxy]-4-propargyloxy-benzene; B.P. 145°-148°C/1 mmHg.

反応条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

実験手順: Hydroquinone (49.6 g; 450 mM) was dissolved in 700 ml of anhydrous acetone in a two liter, 3-necked, round bottom flask equipped with reflux condensor, air stirrer and nitrogen bubbler. Potassium carbonate (65.6 g; 460 mM) was ground finely and then added to the reaction followed by propargylbromide (53.6 g; 450 mM). The reaction was heated at reflux for three days, cooled to room temperature, filtered and the solvent removed. The residue was taken up in ether and extracted three times with 2.5N aqueous sodium hydroxide. The basic layers were acidified with concentrated hydrochloric acid while adding ice and extracted twice with ether. The combined ethereal layers were dried over magnesium sulfate, charcoal was added, and the mixture was filtered through celite. The solvent was removed in vacuo and the remaining dark brown sludge was purified by chromatography in two portions on a Waters Prep 500 equipped with two silica gel cartridges and eluted with 20% ethyl acetate in hexane after injecting in ether solution. This produced 21.4 g (64% of theory) of the desired p-propargyloxyphenol. 3-necked, round bottom flask equipped with reflux condensor, air stirrer and nitrogen bubbler added to the reaction The reaction was heated at reflux for three days filtered the solvent removed extracted three times with 2.5N aqueous sodium hydroxide while adding ice extracted twice with ether The combined ethereal layers were dried over magnesium sulfate, charcoal was added the mixture was filtered through celite The solvent was removed in vacuo the remaining dark brown sludge was purified by chromatography in two portions on a Waters Prep 500 equipped with two silica gel cartridges eluted with 20% ethyl acetate in hexane

反応条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

実験手順: Hydroquinone (49.6 g; 450 mM) was dissolved in 700 ml of anhydrous acetone in a two liter, 3-necked, round bottom flask equipped with reflux condensor, air stirrer and nitrogen bubbler. Potassium carbonate (65.6 g; 460 mM) was ground finely and then added to the reaction followed by propargylbromide (53.6 g; 450 mM). The reaction was heated at reflux for three days, cooled to room temperature, filtered and the solvent removed. The residue was taken up in ether and extracted three times with 2.5N aqueous sodium hydroxide. The basic layers were acidified with concentrated hydrochloric acid while adding ice and extracted twice with ether. The combined ethereal layers were dried over magnesium sulfate, charcoal was added, and the mixture was filtered through celite. The solvent was removed in vacuo and the remaining dark brown sludge was purified by chromatography in two portions on a Waters Prep 500 equipped with two silica gel cartridges and eluted with 20% ethyl acetate in hexane after injecting in ether solution. This produced 21.4 g (64% of theory) of the desired p-propargyloxyphenol. 3-necked, round bottom flask equipped with reflux condensor, air stirrer and nitrogen bubbler added to the reaction The reaction was heated at reflux for three days filtered the solvent removed extracted three times with 2.5N aqueous sodium hydroxide while adding ice extracted twice with ether The combined ethereal layers were dried over magnesium sulfate, charcoal was added the mixture was filtered through celite The solvent was removed in vacuo the remaining dark brown sludge was purified by chromatography in two portions on a Waters Prep 500 equipped with two silica gel cartridges eluted with 20% ethyl acetate in hexane

反応条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

実験手順: Hydroquinone (49.6 g; 450 mM) was dissolved in 700 ml of anhydrous acetone in a two liter, 3-necked, round bottom flask equipped with reflux condensor, air stirrer and nitrogen bubbler. Potassium carbonate (65.6 g; 460 mM) was ground finely and then added to the reaction followed by propargylbromide (53.6 g; 450 mM). The reaction was heated at reflux for three days, cooled to room temperature, filtered and the solvent removed. The residue was taken up in ether and extracted three times with 2.5 N aqueous sodium hydroxide. The basic layers were acidified with concentrated hydrochloric acid while adding ice and extracted twice with ether. The combined ethereal layers were dried over magnesium sulfate, charcoal was added, and the mixture was filtered through celite. The solvent was removed in vacuo and the remaining dark brown sludge was purified by chromatography in two portions on a Waters Prep 500 equipped with two silica gel cartridges and eluted with 20% ethyl acetate in hexane after injecting in ether solution. This produced 21.4 g (64% of theory) of the desired p-propargyloxyphenol. 3-necked, round bottom flask equipped with reflux condensor, air stirrer and nitrogen bubbler added to the reaction The reaction was heated at reflux for three days filtered the solvent removed extracted three times with 2.5 N aqueous sodium hydroxide while adding ice extracted twice with ether The combined ethereal layers were dried over magnesium sulfate, charcoal was added the mixture was filtered through celite The solvent was removed in vacuo the remaining dark brown sludge was purified by chromatography in two portions on a Waters Prep 500 equipped with two silica gel cartridges eluted with 20% ethyl acetate in hexane

反応条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

実験手順: Hydroquinone (49.6 g; 450 mM) was dissolved in 700 ml of anhydrous acetone in a two liter, 3-necked, round bottom flask equipped with reflux condensor, air stirrer and nitrogen bubbler. Potassium carbonate (65.6 g; 460 mM) was ground finely and then added to the reaction followed by propargylbromide (53.6 g; 450 mM). The reaction was heated at reflux for three days, cooled to room temperature, filtered and the solvent removed. The residue was taken up in ether and extracted three times with 2.5 N aqueous sodium hydroxide. The basic layers were acidified with concentrated hydrochloric acid while adding ice and extracted twice with ether. The combined ethereal layers were dried over magnesium sulfate, charcoal was added, and the mixture was filtered through celite. The solvent was removed in vacuo and the remaining dark brown sludge was purified by chromatography in two portions on a Waters Prep 500 equipped with two silica gel cartridges and eluted with 20% ethyl acetate in hexane after injecting in ether solution. This produced 21.4 g (64% of theory) of the desired p-propargyloxyphenol. 3-necked, round bottom flask equipped with reflux condensor, air stirrer and nitrogen bubbler added to the reaction The reaction was heated at reflux for three days filtered the solvent removed extracted three times with 2.5 N aqueous sodium hydroxide while adding ice extracted twice with ether The combined ethereal layers were dried over magnesium sulfate, charcoal was added the mixture was filtered through celite The solvent was removed in vacuo the remaining dark brown sludge was purified by chromatography in two portions on a Waters Prep 500 equipped with two silica gel cartridges eluted with 20% ethyl acetate in hexane

反応条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

実験手順: Hydroquinone (75.0 grams, 0.681 moles) is dissolved in 395 milliliters dimethylsulfoxide. The flask is purged with nitrogen, and aqueous sodium hydroxide (275 milliliters of a 5N solution, 1.375 moles) and water (210 milliliters) are added. Propargyl chloride (50.0 milliliters, 51.5 grams, 0.691 moles) is then added and the solution is stirred at room temperature overnight. The aqueous solution is washed twice with toluene, and then is acidified with 65 milliliters concentrated hydrochloric acid. The solution is extracted ten times with 100 milliliters toluene. The combined organic extracts are washed with 200 milliliters water and dried. Solvent is evaporated off and the crude product is distilled under vacuum. The boiling range of a fraction collected is between about 100° C. and about 109° C. at pressures between about 0.4 and 0.5 millimeters of mercury. The yield of monopropargyl ether is about 53 grams reflecting a yield of about 52 percent. Gas chromatography analysis shows no other products present. The flask is purged with nitrogen, and aqueous sodium hydroxide (275 milliliters of a 5N solution, 1.375 moles) and water (210 milliliters) are added The aqueous solution is washed twice with toluene The solution is extracted ten times with 100 milliliters toluene The combined organic extracts are washed with 200 milliliters water dried Solvent is evaporated off the crude product is distilled under vacuum The boiling range of a fraction collected is between about 100° C. and about 109° C. at pressures between about 0.4 and 0.5 millimeters of mercury

反応条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

実験手順: By utilizing the procedure of Example 1, by reacting hydroquinone monopropargyl ether with 3-methyl-2-butenyl bromide, there is obtained 1-[(3-methyl-2-butenyl)oxy]-4-propargyloxy-benzene; B.P. 145°-148° C/1 mmHg.

反応条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

実験手順: Hydroquinone (49.6 g; 450 mM) was dissolved in 700 ml of anhydrous acetone in a two liter, 3-necked, round bottom flask equipped with reflux condensor, air stirrer and nitrogen bubbler. Potassium carbonate (65.6 g; 460 mM) was ground finely and then added to the reaction followed by propargylbromide (53.6 g; 450 mM). The reaction was heated at reflux for three days, cooled to room temperature, filtered and the solvent removed. The residue was taken up in ether and extracted three times with 2.5N aqueous sodium hydroxide. The basic layers were acidified with concentrated hydrochloric acid while adding ice and extracted twice with ether. The combined ethereal layers were dried over magnesium sulfate, charcoal was added, and the mixture was filtered through celite. The solvent was removed in vacuo and the remaining dark brown sludge was purified by chromatography in two portions on a Waters Prep 500 equipped with two silica gel cartridges and eluted with 20% ethyl acetate in hexane after injecting in ether solution. This produced 21.4 g (64% of theory) of the desired p-propargyloxyphenol. 3-necked, round bottom flask equipped with reflux condensor, air stirrer and nitrogen bubbler added to the reaction The reaction was heated at reflux for three days filtered the solvent removed extracted three times with 2.5N aqueous sodium hydroxide while adding ice extracted twice with ether The combined ethereal layers were dried over magnesium sulfate, charcoal was added the mixture was filtered through celite The solvent was removed in vacuo the remaining dark brown sludge was purified by chromatography in two portions on a Waters Prep 500 equipped with two silica gel cartridges eluted with 20% ethyl acetate in hexane

反応条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

実験手順: By utilizing the procedure of Example 1, by reacting hydroquinone monopropargyl ether with 3-methyl-2-butenyl bromide, there is obtained 1-[(3-methyl-2-butenyl)oxy]-4-propargyloxy-benzene; B.P. 145°-148° C./1 mmHg.

反応条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

実験手順: By utilizing the procedure of Example 1, by reacting hydroquinone monopropargyl ether with 3-methyl-2-butenyl bromide, there is obtained 1-[(3-methyl-2-butenyl)oxy]-4-propargyloxy-benzene; B.P. 145°-148°C/1 mmHg.

反応条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

実験手順: Hydroquinone (49.6 g; 450 mM) was dissolved in 700 ml of anhydrous acetone in a two liter, 3-necked, round bottom flask equipped with reflux condensor, air stirrer and nitrogen bubbler. Potassium carbonate (65.6 g; 460 mM) was ground finely and then added to the reaction followed by propargylbromide (53.6 g; 450 mM). The reaction was heated at reflux for three days, cooled to room temperature, filtered and the solvent removed. The residue was taken up in ether and extracted three times with 2.5N aqueous sodium hydroxide. The basic layers were acidified with concentrated hydrochloric acid while adding ice and extracted twice with ether. The combined ethereal layers were dried over magnesium sulfate, charcoal was added, and the mixture was filtered through celite. The solvent was removed in vacuo and the remaining dark brown sludge was purified by chromatography in two portions on a Waters Prep 500 equipped with two silica gel cartridges and eluted with 20% ethyl acetate in hexane after injecting in ether solution. This produced 21.4 g (64% of theory) of the desired p-propargyloxyphenol. 3-necked, round bottom flask equipped with reflux condensor, air stirrer and nitrogen bubbler added to the reaction The reaction was heated at reflux for three days filtered the solvent removed extracted three times with 2.5N aqueous sodium hydroxide while adding ice extracted twice with ether The combined ethereal layers were dried over magnesium sulfate, charcoal was added the mixture was filtered through celite The solvent was removed in vacuo the remaining dark brown sludge was purified by chromatography in two portions on a Waters Prep 500 equipped with two silica gel cartridges eluted with 20% ethyl acetate in hexane