5,6,8,9-tetrahydrobenzo[7]annulen-7-one

反応条件: temp:0.00; pressure:0.00; stir:

反応条件: temp:0.00; pressure:0.00; stir:

反応条件: temp:0.00; pressure:0.00; stir:

反応条件: temp:0.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

実験手順: To a solution of cold (0° C.) concentrated sulfuric acid (15 mL) was added 70% nitric acid (15 mL) dropwise over 30 min. The addition was controlled to maintain the internal reaction temperature below 5° C. After the addition, the resulting solution was transferred into an addition funnel and was added dropwise to a solution of 8,9-dihydro-5H-benzo[7]annulen-7(6H)-one (14 g, 87.5 mmol) in nitromethane (80 mL) at 0° C. over a period of 40 min. After the addition, the reaction mixture was stirred at 0° C. for 2 h. Then ice water (˜80 mL) was added to the reaction mixture, and the mixture was stirred for additional 30 min. Then the mixture was transferred to a separatory funnel where the layers were separated. The aqueous layer was extracted with ethyl acetate (3×80 mL). The combined layers were washed with cold water, sat. NaHCO3 solution and brine. After being dried (MgSO4), filtered, and concentrated, the residue was purified by flash column chromatography on silica gel (hexanes/EtOAc=3:1 to 2:1) to afford the mixture of nitro regioisomers (˜15 g), which was then purified by recrystallization from MTBE (tert-butyl methyl ether, 180 mL) to yield 7.3 g of 2-nitro-8,9-dihydro-5H-benzo[7]annulen-7(6H)-one (40% yield) as a yellow solid: 1H NMR (300 MHz, CDCl3) δ: 8.10-8.06 (m, 2H), 7.40-7.37 (m, 1H), 3.04-3.00 (m, 4H), 2.67-2.65 (m, 4H); LC-MS: 206 (M+H)+. The addition to maintain the internal reaction temperature below 5° C After the addition the resulting solution was transferred into an addition funnel After the addition the mixture was stirred for additional 30 min Then the mixture was transferred to a separatory funnel where the layers were separated The aqueous layer was extracted with ethyl acetate (3×80 mL) The combined layers were washed with cold water, sat. NaHCO3 solution and brine After being dried (MgSO4) filtered concentrated the residue was purified by flash column chromatography on silica gel (hexanes/EtOAc=3:1 to 2:1) to afford was then purified by recrystallization from MTBE (tert-butyl methyl ether, 180 mL)

反応条件: temp:85.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

実験手順: The crude dimethyl 7-oxo-6,7,8,9-tetrahydro-5H-benzo[7]annulene-6,8-dicarboxylate was dissolved in 200 mL of ethanol (EtOH) and then 100 mL of 2 N KOH. The resulting mixture was refluxed at 85° C. for 17 h. After cooling to ambient temperature, the volatiles were evaporated. To the residue was added 120 mL of 2N HCl at 0° C., the crude product was extracted by EtOAc (200 mL×2). The combined extracts were washed with brine. After being dried (MgSO4), filtered, and concentrated, the residue was purified by flash column chromatography on silica gel (hexanes/EtOAc 8:1) to afford 6.6 g (57%) of 8,9-dihydro-5H-benzo[7]annulen-7(6H)-one as a white solid: mp 40-41° C.; 1H NMR (300 MHz, CDCl3) δ: 7.21 (m, 4H), 2.94-2.90 (m, 4H), 2.63-2.60 (m, 4H); LC-MS: 161 (M+H)+. After cooling to ambient temperature the volatiles were evaporated To the residue was added 120 mL of 2N HCl at 0° C. the crude product was extracted by EtOAc (200 mL×2) The combined extracts were washed with brine After being dried (MgSO4) filtered concentrated the residue was purified by flash column chromatography on silica gel (hexanes/EtOAc 8:1)

反応条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

実験手順: A mixture of 16.0 g. (0.1 mole) of 5,6,8,9-tetrahydro-7H-cycloheptabenzen-7-one and 42.4 g. (0.1 mole) of cyanobutyltriphenylphosphonium bromide in 500 ml. of dimethoxyethane is stirred under nitrogen and treated portionwise with 0.11 mole of 50% NaH dispersed in mineral oil. After several hours, the mixture is freed of solvent and the product extracted into ether. The crude product is dissolved in ethanol, treated with NH3 and 10 g. of Raney nickel and hydrogenated at 1500 psi of hydrogen at 100°-120°. After uptake is complete, the mixture is cooled, freed of catalyst and the product isolated from solvent. The crude 7-aminopentyl-6,7,8,9-tetrahydro-5H-benzocycloheptene is taken up in 100 ml. of ether and added to 500 ml. of liq. NH3. The solution is treated with 20 g. of lithium in small pieces over 1 hour. Then absolute ethanol is added slowly dropwise to discharge the color. After removal of NH3, the mixture is cooled, treated with water, and extracted with ether. Removal of solvents leaves crude 7-aminopentyl-1,4,6,7,8,9-hexahydro-5H-benzocycloheptene which is converted to its N-benzoyl derivative and thence to the tetrol as described previously. A mixture of 16.0 g dispersed in mineral oil After several hours the product extracted into ether The crude product is dissolved in ethanol treated with NH3 and 10 g at 100°-120° the mixture is cooled the product isolated from solvent The solution is treated with 20 g After removal of NH3 the mixture is cooled treated with water extracted with ether Removal of solvents

反応条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

実験手順: 5,6,8,9-Tetrahydro-benzocyclohepten-7-one (3.00 g) and benzylamine (2.00 g) are dissolved in ethanol (50 mL). A catalytic amount of 10% palladium on charcoal is added and the reaction mixture is placed under an atmosphere of hydrogen. The reaction mixture is stirred at r.t. The reaction is shown to be complete by TLC after 24 hours. The catalyst is filtered off and the solvent is removed in vacuo. The product is not purified further. TLC (silica, n-hexane/ethyl acetate 1:2 Rf=0.50). The catalyst is filtered off the solvent is removed in vacuo The product is not purified further

反応条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

実験手順: 5,6,8,9-Tetrahydro-benzocyclohepten-7-one (3.00 g) and benzylamine (2.00 g) are dissolved in ethanol (50 mL). A catalytic amount of 10% palladium on charcoal is added and the reaction mixture is placed under an atmosphere of hydrogen. The reaction mixture is stirred at r.t. The reaction is shown to be complete by TLC after 24 hours. The catalyst is filtered off and the solvent is removed in vacuo. The product is not purified further. TLC (silica, n-hexane/ethyl acetate 1:2 Rf=0.50). The catalyst is filtered off the solvent is removed in vacuo The product is not purified further

反応条件: temp:-35.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

実験手順: A flask containing 90% nitric acid was cooled to at −35° C. using an acetonitrile-dry ice bath. 5,6,8,9-Tetrahydro-benzocyclohepten-7-one (0.5 g, 0.003 mol) was added in portions over 30 minutes. The mixture was warmed slightly to at −20° C. for 1.5 h until all of the material was dissolved. The mixture was poured over ice and water and the resulting precipitate was collected by filtration and washed with water. The solid was dried at under vacuum overnight to give a tan solid (0.58, 78%), 2-nitro-5,6,8,9-tetrahydrobenzocyclohepten-7-one. 1H NMR (400 MHz, DMSO-d6) δ 8.12 (s, 1H), 8.09 (d, 1H, J=8.4 Hz), 7.40 (d, 1H, J=8.4 Hz), 3.03 (m, 4H), 2.65 (m, 4H), The mixture was warmed slightly to at −20° C. for 1.5 h until all of the material was dissolved the resulting precipitate was collected by filtration washed with water The solid was dried at under vacuum overnight

反応条件: temp:-35.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

実験手順: A flask containing 90% nitric acid was cooled to at −35° C. using an acetonitrile-dry ice bath. 5,6,8,9-Tetrahydro-benzocyclohepten-7-one (0.5 g, 0.003 mol) was added in portions over 30 minutes. The mixture was warmed slightly to at −20° C. for 1.5 h until all of the material was dissolved. The mixture was poured over ice and water and the resulting precipitate was collected by filtration and washed with water. The solid was dried at under vacuum overnight to give a tan solid (0.58, 78%), 2-nitro-5,6,8,9-tetrahydrobenzocyclohepten-7-one. 1H NMR (400 MHz, DMSO-d6) δ 8.12 (s, 1H), 8.09 (d, 1H, J=8.4 Hz), 7.40 (d, 1H, J=8.4 Hz), 3.03 (m, 4H), 2.65 (m, 4H), The mixture was warmed slightly to at −20° C. for 1.5 h until all of the material was dissolved the resulting precipitate was collected by filtration washed with water The solid was dried at under vacuum overnight

反応条件: temp:0.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

実験手順: To a solution of cold (0° C.) concentrated sulfuric acid (15 mL) was added 70% nitric acid (15 mL) dropwise over 30 min. The addition was controlled to maintain the internal reaction temperature below 5° C. After the addition, the resulting solution was transferred into an addition funnel and was added dropwise to a solution of 7-oxo-6,7,8,9-tetrahydro-5H-benzo[7]annulene (14 g, 87.5 mmol) in nitromethane (80 mL) at 0° C. over a period of 40 min. After the addition, the reaction mixture was stirred at 0° C. for 2 h. Then ice water (˜80 mL) was added to the reaction mixture, and the mixture was stirred for additional 30 min. Then the mixture was transferred to a separatory funnel where the layers were separated. The aqueous layer was extracted with ethyl acetate (3×80 mL). The combined layers were washed with cold water, sat. NaHCO3 solution and brine. After being dried (MgSO4), filtered, and concentrated, the residue was purified by flash column chromatography on silica gel (hexanes/EtOAc=3:1 to 2:1) to afford the mixture of nitro regioisomers (˜15 g), which was then purified by recrystallization from MTBE (tert-butyl methyl ether, 180 mL) to yield 7.3 g of 2-nitro-8,9-dihydro-5H-benzo[7]annulene-7(6H)-one (40% yield) as a yellow solid: 1H NMR (300 MHz, CDCl3) δ: 8.10-8.06 (m, 2H), 7.40-7.37 (m, 1H), 3.04-3.00 (m, 4H), 2.67-2.65 (m, 4H); LC-MS: 206 (M+H)+. The addition to maintain the internal reaction temperature below 5° C After the addition the resulting solution was transferred into an addition funnel After the addition the mixture was stirred for additional 30 min Then the mixture was transferred to a separatory funnel where the layers were separated The aqueous layer was extracted with ethyl acetate (3×80 mL) The combined layers were washed with cold water, sat. NaHCO3 solution and brine After being dried (MgSO4) filtered concentrated the residue was purified by flash column chromatography on silica gel (hexanes/EtOAc=3:1 to 2:1) to afford was then purified by recrystallization from MTBE (tert-butyl methyl ether, 180 mL)

反応条件: temp:0.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

実験手順: To a solution of cold (0° C.) concentrated sulfuric acid (15 mL) was added 70% nitric acid (15 mL) dropwise over 30 min. The addition was controlled to maintain the internal reaction temperature below 5° C. After the addition, the resulting solution was transferred into an addition funnel and was added dropwise to a solution of 7-oxo-6,7,8,9-tetrahydro-5H-benzo[7]annulene (14 g, 87.5 mmol) in nitromethane (80 mL) at 0° C. over a period of 40 min. After the addition, the reaction mixture was stirred at 0° C. for 2 h. Then ice water (˜80 mL) was added to the reaction mixture, and the mixture was stirred for additional 30 min. Then the mixture was transferred to a separatory funnel where the layers were separated. The aqueous layer was extracted with ethyl acetate (3×80 mL). The combined layers were washed with cold water, sat. NaHCO3 solution and brine. After being dried (MgSO4), filtered, and concentrated, the residue was purified by flash column chromatography on silica gel (hexanes/EtOAc=3:1 to 2:1) to afford the mixture of nitro regioisomers (˜15 g), which was then purified by recrystallization from MTBE (tert-butyl methyl ether, 180 mL) to yield 7.3 g of 2-nitro-8,9-dihydro-5H-benzo[7]annulene-7(6H)-one (40% yield) as a yellow solid: 1H NMR (300 MHz, CDCl3) δ: 8.10-8.06 (m, 2H), 7.40-7.37 (m, 1H), 3.04-3.00 (m, 4H), 2.67-2.65 (m, 4H); LC-MS: 206 (M+H)+. The addition to maintain the internal reaction temperature below 5° C After the addition the resulting solution was transferred into an addition funnel After the addition the mixture was stirred for additional 30 min Then the mixture was transferred to a separatory funnel where the layers were separated The aqueous layer was extracted with ethyl acetate (3×80 mL) The combined layers were washed with cold water, sat. NaHCO3 solution and brine After being dried (MgSO4) filtered concentrated the residue was purified by flash column chromatography on silica gel (hexanes/EtOAc=3:1 to 2:1) to afford was then purified by recrystallization from MTBE (tert-butyl methyl ether, 180 mL)