tetradec-7-ene

反応条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

実験手順: A mixture of 7-tetradecene (3.92 g) and bromomethanesulfonyl bromide (7.14 g) in methylene chloride (8 mL) was irradiated at -15° C. with an ultraviolet lamp for 2 hours. A small amount of solid potassium carbonate was added and then removed by filtration. The reaction mixture was diluted with methylene chloride (100 mL) and triethylamine (3.0 g) was added. The reaction mixture was heated on a steam bath for 1 hour. The reaction mixture was washed with dilute HCl and water. The methylene chloride layer was separated, dried over anhydrous magnesium sulfate and the methylene chloride removed in vacuo to give 7.1 g (100% yield) of oily 7-tetradecenyl bromomethyl sulfone which was characterized by IR and NMR spectroscopy. was irradiated at -15° C. with an ultraviolet lamp for 2 hours removed by filtration The reaction mixture was diluted with methylene chloride (100 mL) and triethylamine (3.0 g) was added The reaction mixture was heated on a steam bath for 1 hour The reaction mixture was washed with dilute HCl and water The methylene chloride layer was separated dried over anhydrous magnesium sulfate the methylene chloride removed in vacuo

反応条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

実験手順: The increase in the activity of metathesis catalysts as a result of the addition of salts was likewise examined in Inorganica Chimica Acta 359 (2006) 2910-2917. The influences of tin chloride, tin bromide, tin iodide, iron(II) chloride, iron(II) bromide, iron(III) chloride, cerium(III) chloride*7H2O, ytterbium(III) chloride, antimony trichloride, gallium dichloride and aluminium trichloride on the self-metathesis of 1-octene to form 7-tetradecene and ethylene were studied. When the Grubbs-I catalyst was used, a significant improvement in the to conversion of 7-tetradecene was observed on addition of tin chloride or tin bromide (Table 1). Without the addition of a salt, a conversion of 25.8% was achieved, when SnCl2*2H2O was added the conversion rose to 68.5% and when tin bromide was added it rose to 71.9%. Addition of tin iodide significantly reduced the conversion from 25.8% to 4.1%. However, in combination with the Grubbs II catalyst, all three tin salts lead to only slight improvements in conversion from 76.3% (reference experiment without addition) to 78.1% (SnCl2), to 79.5% (SnBr2) and 77.6% (SnI2). When the “Phobcats” [Ru(phobCy)2Cl2 (=ChPh)] is used, the conversion is reduced from 87.9% to 80.8% by addition of SuCl2, to 81.6% by addition of SnBr2 and to 73.9% by addition of SnI2. When iron(II) salts are used in combination with the Grubbs I catalyst, the increase in conversion when iron(II) bromide is used is higher than when iron(II) chloride is used. It may be noted that regardless of the type of catalyst used, the conversion is always higher when bromides are used than when the corresponding chlorides are used. The increase in the activity of metathesis catalysts as a result of the addition of salts

反応条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

実験手順: The increase in the activity of metathesis catalysts as a result of the addition of salts was likewise examined in Inorganica Chimica Acta 359 (2006) 2910-2917. The influences of tin chloride, tin bromide, tin iodide, iron(II) chloride, iron(II) bromide, iron(III) chloride, cerium(III) chloride*7H2O, ytterbium(III) chloride, antimony trichloride, gallium dichloride and aluminium trichloride on the self-metathesis of 1-octene to form 7-tetradecene and ethylene were studied. When the Grubbs-I catalyst was used, a significant improvement in the to conversion of 7-tetradecene was observed on addition of tin chloride or tin bromide (Table 1). Without the addition of a salt, a conversion of 25.8% was achieved, when SnCl2*2H2O was added the conversion rose to 68.5% and when tin bromide was added it rose to 71.9%. Addition of tin iodide significantly reduced the conversion from 25.8% to 4.1%. However, in combination with the Grubbs II catalyst, all three tin salts lead to only slight improvements in conversion from 76.3% (reference experiment without addition) to 78.1% (SnCl2), to 79.5% (SnBr2) and 77.6% (SnI2). When the “Phobcats” [Ru(phobCy)2Cl2 (=ChPh)] is used, the conversion is reduced from 87.9% to 80.8% by addition of SuCl2, to 81.6% by addition of SnBr2 and to 73.9% by addition of SnI2. When iron(II) salts are used in combination with the Grubbs I catalyst, the increase in conversion when iron(II) bromide is used is higher than when iron(II) chloride is used. It may be noted that regardless of the type of catalyst used, the conversion is always higher when bromides are used than when the corresponding chlorides are used. The increase in the activity of metathesis catalysts as a result of the addition of salts

反応条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

実験手順: A process for preparing 9-hexadecenyl alcohol by reacting 1-octene or 7-tetradecene with 9-decenyl acetate in accordance with the method of claim 7 to obtain 9-hexadecenyl acetate and then reacting the acetate with water to obtain the corresponding alcohol.

反応条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

実験手順: A process for preparing 9-hexadecenyl alcohol by reacting 1-octene or 7-tetradecene with 9-decenyl acetate in accordance with the method of claim 7 to obtain 9-hexadecenyl acetate and then reacting the acetate with water to obtain the corresponding alcohol.

反応条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

実験手順: A mixture of 7-tetradecene (3.92 g) and bromomethanesulfonyl bromide (7.14 g) in methylene chloride (8 mL) was irradiated at -15° C. with an ultraviolet lamp for 2 hours. A small amount of solid potassium carbonate was added and then removed by filtration. The reaction mixture was diluted with methylene chloride (100 mL) and triethylamine (3.0 g) was added. The reaction mixture was heated on a steam bath for 1 hour. The reaction mixture was washed with dilute HCl and water. The methylene chloride layer was separated, dried over anhydrous magnesium sulfate and the methylene chloride removed in vacuo to give 7.1 g (100% yield) of oily 7-tetradecenyl bromomethyl sulfone which was characterized by IR and NMR spectroscopy. was irradiated at -15° C. with an ultraviolet lamp for 2 hours removed by filtration The reaction mixture was diluted with methylene chloride (100 mL) and triethylamine (3.0 g) was added The reaction mixture was heated on a steam bath for 1 hour The reaction mixture was washed with dilute HCl and water The methylene chloride layer was separated dried over anhydrous magnesium sulfate the methylene chloride removed in vacuo

反応条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

実験手順: The increase in the activity of metathesis catalysts as a result of the addition of salts was likewise examined in Inorganica Chimica Acta 359 (2006) 2910-2917. The influences of tin chloride, tin bromide, tin iodide, iron(II) chloride, iron(II) bromide, iron(III) chloride, cerium(III) chloride*7H2O, ytterbium(III) chloride, antimony trichloride, gallium dichloride and aluminium trichloride on the self-metathesis of 1-octene to form 7-tetradecene and ethylene were studied. When the Grubbs-I catalyst was used, a significant improvement in the to conversion of 7-tetradecene was observed on addition of tin chloride or tin bromide (Table 1). Without the addition of a salt, a conversion of 25.8% was achieved, when SnCl2*2H2O was added the conversion rose to 68.5% and when tin bromide was added it rose to 71.9%. Addition of tin iodide significantly reduced the conversion from 25.8% to 4.1%. However, in combination with the Grubbs II catalyst, all three tin salts lead to only slight improvements in conversion from 76.3% (reference experiment without addition) to 78.1% (SnCl2), to 79.5% (SnBr2) and 77.6% (SnI2). When the “Phobcats” [Ru(phobCy)2Cl2 (=ChPh)] is used, the conversion is reduced from 87.9% to 80.8% by addition of SuCl2, to 81.6% by addition of SnBr2 and to 73.9% by addition of SnI2. When iron(II) salts are used in combination with the Grubbs I catalyst, the increase in conversion when iron(II) bromide is used is higher than when iron(II) chloride is used. It may be noted that regardless of the type of catalyst used, the conversion is always higher when bromides are used than when the corresponding chlorides are used. The increase in the activity of metathesis catalysts as a result of the addition of salts

反応条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

実験手順: The increase in activity of metathesis catalysts brought about by salts has likewise been studied in Inorganica Chimica Acta 359 (2006) 2910-2917. The influences of tin chloride, tin bromide, tin iodide, iron(II) chloride, iron(II) bromide, iron(III) chloride, cerium(III) chloride*7H2O, ytterbium(III) chloride, antimony trichloride, gallium dichloride and aluminium trichloride on the self-metathesis of 1-octene to form 7-tetradecene and ethylene were examined. When using the Grubbs (I) catalyst, a significant improvement in the conversion to 7-tetradecene was observed when tin chloride or tin bromide was added (Table 1; catalyst 1). Without addition of salt, a conversion of 25.8% was achieved; when 5 nCl2*2H2O was added, the conversion rose to 68.5% and when tin bromide was added it rose to 71.9%. Addition of tin iodide resulted in a significant decrease in the conversion from 25.8% to 4.1%. In combination with the Grubbs (II) catalyst (Table 1; catalyst 2), on the other hand, all three tin salts led to only slight improvements in yield from 76.3% (reference experiment without addition) to 78.1% (SnCl2), to 79.5% (SnBr2) and 77.6% (SnI2). When “phobcat” [Ru(phobCy)2Cl2(═ChPh)] is used (Table 1; catalyst 3), the conversion is decreased from 87.9% to 80.8% by addition of SnCl2, to 81.6% by SnBr2 and to 73.9% by SnI2. When iron(II) salts are used in combination with the Grubbs (I) catalyst (Table 3; catalyst 1), the increase in conversion when using iron(II) bromide is higher than when using iron(II) chloride. It may be remarked that, regardless of the type of catalyst used, the conversion when bromides are used is always higher than when the corresponding chlorides are used. The increase in activity of metathesis catalysts

反応条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

実験手順: The increase in the activity of metathesis catalysts by means of salts was likewise examined in Inorganica Chimica Acta 359 (2006) 2910-2917. The influences of tin chloride, tin bromide, tin iodide, iron(II) chloride, iron(II) bromide, iron(III) chloride, cerium(III) chloride*7H2O, ytterbium(H) chloride, antimony trichloride, gallium dichloride and aluminium trichloride on the self-metathesis of 1-octene to form 7-tetradecene and ethylene were studied. When the Grubbs (I) catalyst was used, a significant improvement in the conversion of 7-tetradecene was observed on addition of tin chloride or tin bromide (Table 1). Without the addition of a salt, a conversion of 25.8% was achieved, when SnCl2*2H2O was added the conversion rose to 68.5% and when tin bromide was added it rose to 71.9%. Addition of tin iodide significantly reduced the conversion from 25.8% to 4.1%. However, in combination with the Grubbs (II) catalyst, all three tin salts lead to only slight improvements in conversion from 76.3% (reference experiment without addition) to 78.1% (SnCl2), to 79.5% (SnBr2) and 77.6% (SnI2). When the “Phobcats” [Ru(phobCy)2Cl2 (=ChPh)] is used, the conversion is reduced from 87.9% to 80.8% by addition of SnCl2, to 81.6% by addition of SnBr2 and to 73.9% by addition of SnI2. When iron(II) salts are used in combination with the Grubbs (1) catalyst, the increase in conversion when iron(II) bromide is used is higher than when iron(II) chloride is used. It may be noted that regardless of the type of catalyst used, the conversion is always higher when bromides are used than when the corresponding chlorides are used. The increase in the activity of metathesis catalysts by means of salts

反応条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

実験手順: The increase in activity of metathesis catalysts brought about by salts has likewise been studied in Inorganica Chimica Acta 359 (2006) 2910-2917. The influences of tin chloride, tin bromide, tin iodide, iron(II) chloride, iron(II) bromide, iron(III) chloride, cerium(III) chloride*7H2O, ytterbium(III) chloride, antimony trichloride, gallium dichloride and aluminium trichloride on the self-metathesis of 1-octene to form 7-tetradecene and ethylene were examined. When using the Grubbs (I) catalyst, a significant improvement in the conversion to 7-tetradecene was observed when tin chloride or tin bromide was added (Table 1; catalyst 1). Without addition of salt, a conversion of 25.8% was achieved; when 5 nCl2*2H2O was added, the conversion rose to 68.5% and when tin bromide was added it rose to 71.9%. Addition of tin iodide resulted in a significant decrease in the conversion from 25.8% to 4.1%. In combination with the Grubbs (II) catalyst (Table 1; catalyst 2), on the other hand, all three tin salts led to only slight improvements in yield from 76.3% (reference experiment without addition) to 78.1% (SnCl2), to 79.5% (SnBr2) and 77.6% (SnI2). When “phobcat” [Ru(phobCy)2Cl2(═ChPh)] is used (Table 1; catalyst 3), the conversion is decreased from 87.9% to 80.8% by addition of SnCl2, to 81.6% by SnBr2 and to 73.9% by SnI2. When iron(II) salts are used in combination with the Grubbs (I) catalyst (Table 3; catalyst 1), the increase in conversion when using iron(II) bromide is higher than when using iron(II) chloride. It may be remarked that, regardless of the type of catalyst used, the conversion when bromides are used is always higher than when the corresponding chlorides are used. The increase in activity of metathesis catalysts

反応条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

実験手順: The increase in the activity of metathesis catalysts by means of salts was likewise examined in Inorganica Chimica Acta 359 (2006) 2910-2917. The influences of tin chloride, tin bromide, tin iodide, iron(II) chloride, iron(II) bromide, iron(III) chloride, cerium(III) chloride*7H2O, ytterbium(H) chloride, antimony trichloride, gallium dichloride and aluminium trichloride on the self-metathesis of 1-octene to form 7-tetradecene and ethylene were studied. When the Grubbs (I) catalyst was used, a significant improvement in the conversion of 7-tetradecene was observed on addition of tin chloride or tin bromide (Table 1). Without the addition of a salt, a conversion of 25.8% was achieved, when SnCl2*2H2O was added the conversion rose to 68.5% and when tin bromide was added it rose to 71.9%. Addition of tin iodide significantly reduced the conversion from 25.8% to 4.1%. However, in combination with the Grubbs (II) catalyst, all three tin salts lead to only slight improvements in conversion from 76.3% (reference experiment without addition) to 78.1% (SnCl2), to 79.5% (SnBr2) and 77.6% (SnI2). When the “Phobcats” [Ru(phobCy)2Cl2 (=ChPh)] is used, the conversion is reduced from 87.9% to 80.8% by addition of SnCl2, to 81.6% by addition of SnBr2 and to 73.9% by addition of SnI2. When iron(II) salts are used in combination with the Grubbs (1) catalyst, the increase in conversion when iron(II) bromide is used is higher than when iron(II) chloride is used. It may be noted that regardless of the type of catalyst used, the conversion is always higher when bromides are used than when the corresponding chlorides are used. The increase in the activity of metathesis catalysts by means of salts

反応条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

実験手順: A process for preparing 9-hexadecenyl alcohol by reacting 1-octene or 7-tetradecene with 9-decenyl acetate in accordance with the method of claim 7 to obtain 9-hexadecenyl acetate and then reacting the acetate with water to obtain the corresponding alcohol.