1-bromo-2-chloro-4-methoxybenzene

反応条件: temp:0.00; pressure:0.00; stir:

反応条件: temp:0.00; pressure:0.00; stir:

反応条件: temp:0.00; pressure:0.00; stir:

反応条件: temp:100.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

実験手順: To a mixture of 4-bromo-3-chloro anisole (35 g, 0.159 mol), KCl (11.9 g, 0.160 mol, 1 eq.), K2CO3 (33 g, 0.238 mol, 1.5 eq) in 400 mL DMF in a sealed tube was added acrolein diethylacetal (73 mL, 0.479 mol, 3 eq.) and Bu4NOAc (96 g, 0.318 mol, 2 eq.). N2 was bubbled through the mixture and Pd(OAc)2 (1.1 g, 4. mmol, 3 mol %) was added. The reaction mixture was heated in an oil bath for 6 hr at 100° C. then cooled in an ice-bath. 300 mL of water was then added, followed by 500 mL of 1N HCl. The ice-bath was removed and the mixture was stirred for 30 min. The solution was extracted with ethyl acetate once then with diethyl ether 3 times. The combined organic layer washed with water, brine, dried over MgSO4, filtered and concentrated to provide the crude product which was recrystallized from hot ethyl acetate-hexanes to provide 15.5 g of crystalline 3-(2-chloro-4-methoxy-phenyl)-propenal. The mother liquor was concentrated and chromatographed with 10% ethyl acetate to provide another 5.6 g of 3-(2-chloro-4-methoxy-phenyl)-propenal. N2 was bubbled through the mixture and Pd(OAc)2 (1.1 g, 4. mmol, 3 mol %) was added then cooled in an ice-bath 300 mL of water was then added The ice-bath was removed The solution was extracted with ethyl acetate once The combined organic layer washed with water, brine dried over MgSO4 filtered concentrated to provide the crude product which was recrystallized from hot ethyl acetate-hexanes

反応条件: temp:120.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

実験手順: Under an argon atmosphere, 1-bromo-2-chloro-4-methoxybenzene (44.3 g) was dissolved in toluene (220 ml), ethyl 2-(4,4,5,5-tetramethyl[1,3,2]dioxaborolan-2-yl)benzoate (60.8 g), water (132 ml), sodium hydrogen carbonate (33.6 g) and dichlorobis(triphenylphosphine)palladium(II) (2.8 g) were added, and the mixture was stirred at an oil bath temperature of 120° C. for 7 hr. To the reaction mixture was added ethyl 2-(4,4,5,5-tetramethyl[1,3,2]dioxaborolan-2-yl)benzoate (5.2 g), and the mixture was further stirred for 2 hr. The reaction mixture was cooled to room temperature, toluene (100 ml) and water (200 ml) were added, and the mixture was stirred overnight. To the reaction mixture was added activated carbon (3 g), and the mixture was further stirred for 1 hr. The insoluble material was filtered off through celite, and the insoluble material was washed with toluene (100 ml) and water (200 ml). The obtained filtrates were combined to allow for layer separation. The obtained organic layer was washed with water (100 ml), and the solvent was evaporated to give the title compound (67.7 g). the mixture was further stirred for 2 hr The reaction mixture was cooled to room temperature the mixture was stirred overnight To the reaction mixture was added activated carbon (3 g) the mixture was further stirred for 1 hr The insoluble material was filtered off through celite the insoluble material was washed with toluene (100 ml) and water (200 ml) to allow for layer separation The obtained organic layer was washed with water (100 ml) the solvent was evaporated

反応条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

実験手順: Under argon gas atmosphere, to a solution of 1-bromo-2-chloro-4-methoxybenzene (120 g) in a mixed diglyme (230 mL) and 1,2-dimethoxyethane (90 mL), sodium cyano acetone (62.6 g), sodium t-butoxide (114.6 g) and sodium iodide (81.2 g) were added with stirring at room temperature to obtain a suspension. By another process, under argon gas atmosphere, a mixture of diglyme (40 mL), palladium acetate (426 mg) and triphenylphosphine (1.99 g) was stirred for about 30 minutes at 110° C. to dissolve. This solution was dropped into the above suspension. The mixture was warmed to 110 to 115° C. of internal temperature and stirred for 7 hours. The reaction mixture was cooled, diluted with ethyl acetate (480 mL) and washed with an aqueous solution of sulfuric acid (concentrated sulfuric acid 101 g/water 660 mL). The organic layer was washed with 10% saturated aqueous solution of sodium chloride (360 mL) twice. Activated charcoal (3.6 g) was added to the organic layer. The mixture was stirred for 1 hour and filtered. The filtrate was washed with ethyl acetate (240 mL) to obtain a solution of 1-cyano-1-(2-chloro-4-methoxyphenyl)propan-2-on (971.7 g). to obtain a suspension was stirred for about 30 minutes at 110° C. to dissolve This solution was dropped into the above suspension The mixture was warmed to 110 to 115° C. of internal temperature stirred for 7 hours The reaction mixture was cooled washed with an aqueous solution of sulfuric acid (concentrated sulfuric acid 101 g/water 660 mL) The organic layer was washed with 10% saturated aqueous solution of sodium chloride (360 mL) twice Activated charcoal (3.6 g) was added to the organic layer The mixture was stirred for 1 hour filtered The filtrate was washed with ethyl acetate (240 mL)

反応条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

実験手順: Under argon gas atmosphere, to a solution of 1-bromo-2-chloro-4-methoxybenzene (120 g) in a mixed diglyme (230 mL) and 1,2-dimethoxyethane (90 mL), sodium cyano acetone (62.6 g), sodium t-butoxide (114.6 g) and sodium iodide (81.2 g) were added with stirring at room temperature to obtain a suspension. By another process, under argon gas atmosphere, a mixture of diglyme (40 mL), palladium acetate (426 mg) and triphenylphosphine (1.99 g) was stirred for about 30 minutes at 110° C. to dissolve. This solution was dropped into the above suspension. The mixture was warmed to 110 to 115° C. of internal temperature and stirred for 7 hours. The reaction mixture was cooled, diluted with ethyl acetate (480 mL) and washed with an aqueous solution of sulfuric acid (concentrated sulfuric acid 101 g/water 660 mL). The organic layer was washed with 10% saturated aqueous solution of sodium chloride (360 mL) twice. Activated charcoal (3.6 g) was added to the organic layer. The mixture was stirred for 1 hour and filtered. The filtrate was washed with ethyl acetate (240 mL) to obtain a solution of 1-cyano-1-(2-chloro-4-methoxyphenyl)propan-2-on (971.7 g). to obtain a suspension was stirred for about 30 minutes at 110° C. to dissolve This solution was dropped into the above suspension The mixture was warmed to 110 to 115° C. of internal temperature stirred for 7 hours The reaction mixture was cooled washed with an aqueous solution of sulfuric acid (concentrated sulfuric acid 101 g/water 660 mL) The organic layer was washed with 10% saturated aqueous solution of sodium chloride (360 mL) twice Activated charcoal (3.6 g) was added to the organic layer The mixture was stirred for 1 hour filtered The filtrate was washed with ethyl acetate (240 mL)

反応条件: temp:0.00; pressure:0.00; stir:

反応条件: temp:0.00; pressure:0.00; stir:

反応条件: temp:0.00; pressure:0.00; stir:

反応条件: temp:-78.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

実験手順: A 1.6M solution of n-butyllithium in hexane (4 ml) was added to a solution of 4-bromo-3-chloroanisole (CAS Reg. No. 50638-46-5, 1.3 g) in THF (20 ml) at −78° C. The mixture was stirred for 30 min at −78° C. Acetaldehyde (0.7 ml) was added to the mixture. The mixture was allowed to warm to room temperature. Water (50 ml) was added and extracted with DCM. The combined organic layers were dried over Na2SO4 and concentrated to an oil to give the title compound (983 mg) as colorless oil. MS (m/e)=186 [M+]. at −78° C to warm to room temperature extracted with DCM The combined organic layers were dried over Na2SO4 concentrated to an oil

反応条件: temp:-78.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

実験手順: A 1.6M solution of n-butyllithium in hexane (4 ml) was added to a solution of 4-bromo-3-chloroanisole (CAS Reg. No. 50638-46-5, 1.3 g) in THF (20 ml) at −78° C. The mixture was stirred for 30 min at −78° C. Acetaldehyde (0.7 ml) was added to the mixture. The mixture was allowed to warm to room temperature. Water (50 ml) was added and extracted with DCM. The combined organic layers were dried over Na2SO4 and concentrated to an oil to give the title compound (983 mg) as colorless oil. MS (m/e)=186 [M+]. at −78° C to warm to room temperature extracted with DCM The combined organic layers were dried over Na2SO4 concentrated to an oil