1-(1-isocyanopentylsulfonyl)-4-methylbenzene

反応条件: temp:0.00; pressure:0.00; stir:

反応条件: temp:0.00; pressure:0.00; stir:

反応条件: temp:0.00; pressure:0.00; stir:

反応条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

実験手順: A solution (120 mL) of 1-[(1-isocyanopentyl)sulfonyl]-4-methylbenzene (10.8 g) and ethyl acrylate (4.78 mL) in tetrahydrofuran was added dropwise to a solution (80 mL) of potassium tert-butoxide (5.79 g) in tetrahydrofuran while stirring at room temperature over 1 hr. The mixture was further stirred at the same temperature for 30 min, and the reaction product was diluted with water, and extracted with ethyl acetate. The extract was washed with saturated brine, dried over anhydrous magnesium sulfate, and concentrated under reduced pressure. The residue was purified by silica gel column chromatography (eluent: hexane-ethyl acetate=19:1→8:2) to give the title compound as a yellow oil (yield 6.56 g, 78%). The mixture was further stirred at the same temperature for 30 min extracted with ethyl acetate The extract was washed with saturated brine dried over anhydrous magnesium sulfate concentrated under reduced pressure The residue was purified by silica gel column chromatography (eluent: hexane-ethyl acetate=19:1→8:2)

反応条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

実験手順: A solution (120 mL) of 1-[(1-isocyanopentyl)sulfonyl]-4-methylbenzene (10.8 g) and ethyl acrylate (4.78 mL) in tetrahydrofuran was added dropwise to a solution (80 mL) of potassium tert-butoxide (5.79 g) in tetrahydrofuran while stirring at room temperature over 1 hr. The mixture was further stirred at the same temperature for 30 min, and the reaction product was diluted with water, and extracted with ethyl acetate. The extract was washed with saturated brine, dried over anhydrous magnesium sulfate, and concentrated under reduced pressure. The residue was purified by silica gel column chromatography (eluent: hexane-ethyl acetate=19:1→8:2) to give the title compound as a yellow oil (yield 6.56 g, 78%). The mixture was further stirred at the same temperature for 30 min extracted with ethyl acetate The extract was washed with saturated brine dried over anhydrous magnesium sulfate concentrated under reduced pressure The residue was purified by silica gel column chromatography (eluent: hexane-ethyl acetate=19:1→8:2)

反応条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

実験手順: A mixture of p-toluenesulfonylmethyl isocyanide (9.75 g), tetrabutylammonium iodide (3.69 g), 1-butyl iodide (11.3 mL), dichloromethane (100 mL) and 30% aqueous sodium hydroxide solution (100 mL) was stirred at room temperature for 12 hr. The reaction product was diluted with water (200 mL), and extracted with dichloromethane. The extract was washed with saturated brine, dried over anhydrous magnesium sulfate, and concentrated under reduced pressure. The obtained gum-like residue was extracted 3 times with diethyl ether (100 mL). The extract was concentrated under reduced pressure to give the title compound as a colorless oil (yield 10.8 g, 86%). extracted with dichloromethane The extract was washed with saturated brine dried over anhydrous magnesium sulfate concentrated under reduced pressure The obtained gum-like residue was extracted 3 times with diethyl ether (100 mL) The extract was concentrated under reduced pressure

反応条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

実験手順: An aqueous solution of NaOH (30%, 240 mL) was added dropwise to a stirred solution of 4-iodobutane (110.5 g, 0.6 mol), p-toluenesulfonyl methyl isocyanide (58.6 g, 0.3 mol), and tetrabutylammonium iodide (8.0 g, 21.6 mmol) in CH2Cl2 (300 mL) at room temperature. The reaction mixture was stirred overnight and diluted with water (200 mL). The organic layer was separated and the aqueous layer was extracted with CH2Cl2 (3×100 mL). The organic layers were combined, washed with saturated NaCl solution (100 mL), dried over MgSO4, and concentrated in vacuo. The residue was taken up in diethyl ether (3×200 mL) and filtered. The filtrate was concentrated and purified by column chromatography (silica gel, ethyl acetate/hexanes=1:3) to give 1-(1-isocyanopentane-1-sulfonyl)-4-methylbenzene (65.7 g, 87%) as an oil. Under N2-atmosphere, sodium hydride (60% dispersion in mineral oil, 11.0 g, 0.275 mol) was added in portions to a solution of ethyl 7-bromo-2,2-dimethylheptanoate (72.8 g, 0.27 mol) and 1-(1-isocyanopentane-1-sulfonyl)-4-methylbenzene (69.0 g, 0.27 mol) in DMSO (500 mL) and diethyl ether (500 mL) at room temperature. After 30 min, tetrabutylammonium iodide (8.0 g, 21.7 mmol) was added and the mixture was stirred for 5 h. A precipitate formed and additional DMSO (500 mL) was added. After stirring overnight at room temperature, the mixture was heated to reflux for 3 h. Water (500 mL) and diethyl ether (500 mL) were added and the layers were separated. The aqueous layer was extracted with diethyl ether (4×200 mL). The combined organic layers were washed with water (500 mL) and saturated NaCl solution (300 mL), dried over MgSO4, and concentrated in vacuo to give crude 8-isocyano-2,2-dimethyl-8-(toluene-4-sulfonyl)-dodecanoic acid ethyl ester (126.2 g) as a dark oil, which was used without further purification. Concentrated, hydrochloric acid (200 mL) was added slowly to a solution of crude 8-isocyano-2,2-dimethyl-8-(toluene-4-sulfonyl)-dodecanoic acid ethyl ester (126.2 g, 0.29 mol) in methylene chloride (300 mL). The reaction mixture was stirred at room temperature for 4 h. Water (500 mL) was added. The aqueous layer was separated and extracted with methylene chloride (3×100 mL). The organic solutions were combined, washed with water (300 mL) and saturated, aqueous NaHCO3 solution (200 mL) and dried over MgSO4. The solvent was evaporated and the residue was purified by column chromatography (silica gel, ethyl acetate/hexanes=1:10) to yield 2,2-dimethyl-8-oxododecanoic acid ethyl ester (69.6 g, 89%) as an oil. 1H NMR (300 MHz, CDCl3/TMS): δ (ppm): 4.1 (q, J=7.3 Hz, 2H), 2.40-2.31 (m, 4H), 1.58-1.45 (m, 6H), 1.31-1.19 (m, 6H), 1.22 (t, 3H, J=7.3 Hz), 1.12 (s, 6H), 0.88 (t, J=7.3 Hz, 3H). 13C NMR (75 MHz, CDCl3/TMS): δ (ppm): 210.5, 178.0, 60.5, 42.5, 42.0, 30.0, 27.0, 26.0, 25.5, 24.0, 23.0, 14.5, 14.0. HRMS (LSIMS, gly): Calcd for C16H31O3 (MH+): 271.2273. found: 271.2275. HPLC: 84% pure. A precipitate formed After stirring overnight at room temperature the mixture was heated to reflux for 3 h the layers were separated The aqueous layer was extracted with diethyl ether (4×200 mL) The combined organic layers were washed with water (500 mL) and saturated NaCl solution (300 mL) dried over MgSO4 concentrated in vacuo

反応条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

実験手順: An aqueous solution of NaOH (30%, 240 mL) was added dropwise to a stirred solution of 4-iodobutane (110.5 g, 0.6 mol), p-toluenesulfonyl methyl isocyanide (58.6 g, 0.3 mol), and tetrabutylammonium iodide (8.0 g, 21.6 mmol) in CH2Cl2 (300 mL) at room temperature. The reaction mixture was stirred overnight and diluted with water (200 mL). The organic layer was separated and the aqueous layer was extracted with CH2Cl2 (3×100 mL). The organic layers were combined, washed with saturated NaCl solution (100 mL), dried over MgSO4, and concentrated in vacuo. The residue was taken up in diethyl ether (3×200 mL) and filtered. The filtrate was concentrated and purified by column chromatography (silica gel, ethyl acetate/hexanes=1:3) to give 1-(1-isocyanopentane-1-sulfonyl)-4-methylbenzene (65.7 g, 87%) as an oil. Under N2-atmosphere, sodium hydride (60% dispersion in mineral oil, 11.0 g, 0.275 mol) was added in portions to a solution of ethyl 7-bromo-2,2-dimethylheptanoate (72.8 g, 0.27 mol) and 1-(1-isocyanopentane-1-sulfonyl)-4-methylbenzene (69.0 g, 0.27 mol) in DMSO (500 mL) and diethyl ether (500 mL) at room temperature. After 30 min, tetrabutylammonium iodide (8.0 g, 21.7 mmol) was added and the mixture was stirred for 5 h. A precipitate formed and additional DMSO (500 mL) was added. After stirring overnight at room temperature, the mixture was heated to reflux for 3 h. Water (500 mL) and diethyl ether (500 mL) were added and the layers were separated. The aqueous layer was extracted with diethyl ether (4×200 mL). The combined organic layers were washed with water (500 mL) and saturated NaCl solution (300 mL), dried over MgSO4, and concentrated in vacuo to give crude 8-isocyano-2,2-dimethyl-8-(toluene-4-sulfonyl)-dodecanoic acid ethyl ester (126.2 g) as a dark oil, which was used without further purification. Concentrated, hydrochloric acid (200 mL) was added slowly to a solution of crude 8-isocyano-2,2-dimethyl-8-(toluene-4-sulfonyl)-dodecanoic acid ethyl ester (126.2 g, 0.29 mol) in methylene chloride (300 mL). The reaction mixture was stirred at room temperature for 4 h. Water (500 mL) was added. The aqueous layer was separated and extracted with methylene chloride (3×100 mL). The organic solutions were combined, washed with water (300 mL) and saturated, aqueous NaHCO3 solution (200 mL) and dried over MgSO4. The solvent was evaporated and the residue was purified by column chromatography (silica gel, ethyl acetate/hexanes=1:10) to yield 2,2-dimethyl-8-oxododecanoic acid ethyl ester (69.6 g, 89%) as an oil. 1H NMR (300 MHz, CDCl3/TMS): δ (ppm): 4.1 (q, J=7.3 Hz, 2H), 2.40-2.31 (m, 4H), 1.58-1.45 (m, 6H), 1.31-1.19 (m, 6H), 1.22 (t, 3H, J=7.3 Hz), 1.12 (s, 6H), 0.88 (t, J=7.3 Hz, 3H). 13C NMR (75 MHz, CDCl3/TMS): δ (ppm): 210.5, 178.0, 60.5, 42.5, 42.0, 30.0, 27.0, 26.0, 25.5, 24.0, 23.0, 14.5, 14.0. HRMS (LSIMS, gly): Calcd for C16H31O3 (MH+): 271.2273. found: 271.2275. HPLC: 84% pure. A precipitate formed After stirring overnight at room temperature the mixture was heated to reflux for 3 h the layers were separated The aqueous layer was extracted with diethyl ether (4×200 mL) The combined organic layers were washed with water (500 mL) and saturated NaCl solution (300 mL) dried over MgSO4 concentrated in vacuo

反応条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

実験手順: An aqueous solution of NaOH (30%, 240 mL) was added dropwise to a stirred solution of 4-iodobutane (110.5 g, 0.6 mol), p-toluenesulfonyl methyl isocyanide (58.6 g, 0.3 mol), and tetrabutylammonium iodide (8.0 g, 21.6 mmol) in CH2Cl2 (300 mL) at room temperature. The reaction mixture was stirred overnight and diluted with water (200 mL). The organic layer was separated and the aqueous layer was extracted with CH2Cl2 (3×100 mL). The organic layers were combined, washed with saturated NaCl solution (100 mL), dried over MgSO4, and concentrated in vacuo. The residue was taken up in diethyl ether (3×200 mL) and filtered. The filtrate was concentrated and purified by column chromatography (silica gel, ethyl acetate/hexanes=1:3) to give 1-(1-isocyanopentane-1-sulfonyl)-4-methylbenzene (65.7 g, 87%) as an oil. Under N2-atmosphere, sodium hydride (60% dispersion in mineral oil, 11.0 g, 0.275 mol) was added in portions to a solution of ethyl 7-bromo-2,2-dimethylheptanoate (72.8 g, 0.27 mol) and 1-(1-isocyanopentane-1-sulfonyl)-4-methylbenzene (69.0 g, 0.27 mol) in DMSO (500 mL) and diethyl ether (500 mL) at room temperature. After 30 min, tetrabutylammonium iodide (8.0 g, 21.7 mmol) was added and the mixture was stirred for 5 h. A precipitate formed and additional DMSO (500 mL) was added. After stirring overnight at room temperature, the mixture was heated to reflux for 3 h. Water (500 mL) and diethyl ether (500 mL) were added and the layers were separated. The aqueous layer was extracted with diethyl ether (4×200 mL). The combined organic layers were washed with water (500 mL) and saturated NaCl solution (300 mL), dried over MgSO4, and concentrated in vacuo to give crude 8-isocyano-2,2-dimethyl-8-(toluene-4-sulfonyl)-dodecanoic acid ethyl ester (126.2 g) as a dark oil, which was used without further purification. Concentrated, hydrochloric acid (200 mL) was added slowly to a solution of crude 8-isocyano-2,2-dimethyl-8-(toluene-4-sulfonyl)-dodecanoic acid ethyl ester (126.2 g, 0.29 mol) in methylene chloride (300 mL). The reaction mixture was stirred at room temperature for 4 h. Water (500 mL) was added. The aqueous layer was separated and extracted with methylene chloride (3×100 mL). The organic solutions were combined, washed with water (300 mL) and saturated, aqueous NaHCO3 solution (200 mL) and dried over MgSO4. The solvent was evaporated and the residue was purified by column chromatography (silica gel, ethyl acetate/hexanes=1:10) to yield 2,2-dimethyl-8-oxododecanoic acid ethyl ester (69.6 g, 89%) as an oil. 1H NMR (300 MHz, CDCl3/TMS): δ (ppm): 4.1 (q, J=7.3 Hz, 2H), 2.40-2.31 (m, 4H), 1.58-1.45 (m, 6H), 1.31-1.19 (m, 6H), 1.22 (t, 3H, J=7.3 Hz), 1.12 (s, 6H), 0.88 (t, J=7.3 Hz, 3H). 13C NMR (75 MHz, CDCl3/TMS): δ (ppm): 210.5, 178.0, 60.5, 42.5, 42.0, 30.0, 27.0, 26.0, 25.5, 24.0, 23.0, 14.5, 14.0. HRMS (LSIMS, gly): Calcd for C16H31O3 (MH+): 271.2273. found: 271.2275. HPLC: 84% pure. The organic layer was separated the aqueous layer was extracted with CH2Cl2 (3×100 mL) washed with saturated NaCl solution (100 mL) dried over MgSO4 concentrated in vacuo filtered The filtrate was concentrated purified by column chromatography (silica gel, ethyl acetate/hexanes=1:3)

反応条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

実験手順: An aqueous solution of NaOH (30%, 240 mL) was added dropwise to a stirred solution of 4-iodobutane (110.5 g, 0.6 mol), p-toluenesulfonyl methyl isocyanide (58.6 g, 0.3 mol), and tetrabutylammonium iodide (8.0 g, 21.6 mmol) in CH2Cl2 (300 mL) at room temperature. The reaction mixture was stirred overnight and diluted with water (200 mL). The organic layer was separated and the aqueous layer was extracted with CH2Cl2 (3×100 mL). The organic layers were combined, washed with saturated NaCl solution (100 mL), dried over MgSO4, and concentrated in vacuo. The residue was taken up in diethyl ether (3×200 mL) and filtered. The filtrate was concentrated and purified by column chromatography (silica gel, ethyl acetate/hexanes=1:3) to give 1-(1-isocyanopentane-1-sulfonyl)-4-methylbenzene (65.7 g, 87%) as an oil. Under N2-atmosphere, sodium hydride (60% dispersion in mineral oil, 11.0 g, 0.275 mol) was added in portions to a solution of ethyl 7-bromo-2,2-dimethylheptanoate (72.8 g, 0.27 mol) and 1-(1-isocyanopentane-1-sulfonyl)-4-methylbenzene (69.0 g, 0.27 mol) in DMSO (500 mL) and diethyl ether (500 mL) at room temperature. After 30 min, tetrabutylammonium iodide (8.0 g, 21.7 mmol) was added and the mixture was stirred for 5 h. A precipitate formed and additional DMSO (500 mL) was added. After stirring overnight at room temperature, the mixture was heated to reflux for 3 h. Water (500 mL) and diethyl ether (500 mL) were added and the layers were separated. The aqueous layer was extracted with diethyl ether (4×200 mL). The combined organic layers were washed with water (500 mL) and saturated NaCl solution (300 mL), dried over MgSO4, and concentrated in vacuo to give crude 8-isocyano-2,2-dimethyl-8-(toluene-4-sulfonyl)-dodecanoic acid ethyl ester (126.2 g) as a dark oil, which was used without further purification. Concentrated, hydrochloric acid (200 mL) was added slowly to a solution of crude 8-isocyano-2,2-dimethyl-8-(toluene-4-sulfonyl)-dodecanoic acid ethyl ester (126.2 g, 0.29 mol) in methylene chloride (300 mL). The reaction mixture was stirred at room temperature for 4 h. Water (500 mL) was added. The aqueous layer was separated and extracted with methylene chloride (3×100 mL). The organic solutions were combined, washed with water (300 mL) and saturated, aqueous NaHCO3 solution (200 mL) and dried over MgSO4. The solvent was evaporated and the residue was purified by column chromatography (silica gel, ethyl acetate/hexanes=1:10) to yield 2,2-dimethyl-8-oxododecanoic acid ethyl ester (69.6 g, 89%) as an oil. 1H NMR (300 MHz, CDCl3/TMS): δ (ppm): 4.1 (q, J=7.3 Hz, 2H), 2.40-2.31 (m, 4H), 1.58-1.45 (m, 6H), 1.31-1.19 (m, 6H), 1.22 (t, 3H, J=7.3 Hz), 1.12 (s, 6H), 0.88 (t, J=7.3 Hz, 3H). 13C NMR (75 MHz, CDCl3/TMS): δ (ppm): 210.5, 178.0, 60.5, 42.5, 42.0, 30.0, 27.0, 26.0, 25.5, 24.0, 23.0, 14.5, 14.0. HRMS (LSIMS, gly): Calcd for C16H31O3 (MH+): 271.2273, found: 271.2275. HPLC: 84% pure. A precipitate formed After stirring overnight at room temperature the mixture was heated to reflux for 3 h the layers were separated The aqueous layer was extracted with diethyl ether (4×200 mL) The combined organic layers were washed with water (500 mL) and saturated NaCl solution (300 mL) dried over MgSO4 concentrated in vacuo

反応条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

実験手順: An aqueous solution of NaOH (30%, 240 mL) was added dropwise to a stirred solution of 4-iodobutane (110.5 g, 0.6 mol), p-toluenesulfonyl methyl isocyanide (58.6 g, 0.3 mol), and tetrabutylammonium iodide (8.0 g, 21.6 mmol) in CH2Cl2 (300 mL) at room temperature. The reaction mixture was stirred overnight and diluted with water (200 mL). The organic layer was separated and the aqueous layer was extracted with CH2Cl2 (3×100 mL). The organic layers were combined, washed with saturated NaCl solution (100 mL), dried over MgSO4, and concentrated in vacuo. The residue was taken up in diethyl ether (3×200 mL) and filtered. The filtrate was concentrated and purified by column chromatography (silica gel, ethyl acetate/hexanes=1:3) to give 1-(1-isocyanopentane-1-sulfonyl)-4-methylbenzene (65.7 g, 87%) as an oil. Under N2-atmosphere, sodium hydride (60% dispersion in mineral oil, 11.0 g, 0.275 mol) was added in portions to a solution of ethyl 7-bromo-2,2-dimethylheptanoate (72.8 g, 0.27 mol) and 1-(1-isocyanopentane-1-sulfonyl)-4-methylbenzene (69.0 g, 0.27 mol) in DMSO (500 mL) and diethyl ether (500 mL) at room temperature. After 30 min, tetrabutylammonium iodide (8.0 g, 21.7 mmol) was added and the mixture was stirred for 5 h. A precipitate formed and additional DMSO (500 mL) was added. After stirring overnight at room temperature, the mixture was heated to reflux for 3 h. Water (500 mL) and diethyl ether (500 mL) were added and the layers were separated. The aqueous layer was extracted with diethyl ether (4×200 mL). The combined organic layers were washed with water (500 mL) and saturated NaCl solution (300 mL), dried over MgSO4, and concentrated in vacuo to give crude 8-isocyano-2,2-dimethyl-8-(toluene-4-sulfonyl)-dodecanoic acid ethyl ester (126.2 g) as a dark oil, which was used without further purification. Concentrated, hydrochloric acid (200 mL) was added slowly to a solution of crude 8-isocyano-2,2-dimethyl-8-(toluene-4-sulfonyl)-dodecanoic acid ethyl ester (126.2 g, 0.29 mol) in methylene chloride (300 mL). The reaction mixture was stirred at room temperature for 4 h. Water (500 mL) was added. The aqueous layer was separated and extracted with methylene chloride (3×100 mL). The organic solutions were combined, washed with water (300 mL) and saturated, aqueous NaHCO3 solution (200 mL) and dried over MgSO4. The solvent was evaporated and the residue was purified by column chromatography (silica gel, ethyl acetate/hexanes=1:10) to yield 2,2-dimethyl-8-oxododecanoic acid ethyl ester (69.6 g, 89%) as an oil. 1H NMR (300 MHz, CDCl3/TMS): δ (ppm): 4.1 (q, J=7.3 Hz, 2H), 2.40-2.31 (m, 4H), 1.58-1.45 (m, 6H), 1.31-1.19 (m, 6H), 1.22 (t, 3H, J=7.3 Hz), 1.12 (s, 6H), 0.88 (t, J=7.3 Hz, 3H). 13C NMR (75 MHz, CDCl3/TMS): δ (ppm): 210.5, 178.0, 60.5, 42.5, 42.0, 30.0, 27.0, 26.0, 25.5, 24.0, 23.0, 14.5, 14.0. HRMS (LSIMS, gly): Calcd for C16H31O3 (MH+): 271.2273, found: 271.2275. HPLC: 84% pure. The organic layer was separated the aqueous layer was extracted with CH2Cl2 (3×100 mL) washed with saturated NaCl solution (100 mL) dried over MgSO4 concentrated in vacuo filtered The filtrate was concentrated purified by column chromatography (silica gel, ethyl acetate/hexanes=1:3)

反応条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

実験手順: An aqueous solution of NaOH (30%, 240 mL) was added dropwise to a stirred solution of 4-iodobutane (110.5 g, 0.6 mol), p-toluenesulfonyl methyl isocyanide (58.6 g, 0.3 mol), and tetrabutylammonium iodide (8.0 g, 21.6 mmol) in CH2Cl2 (300 mL) at room temperature. The reaction mixture was stirred overnight and diluted with water (200 mL). The organic layer was separated and the aqueous layer was extracted with CH2Cl2 (3×100 mL). The organic layers were combined, washed with saturated NaCl solution (100 mL), dried over MgSO4, and concentrated in vacuo. The residue was taken up in diethyl ether (3×200 mL) and filtered. The filtrate was concentrated and purified by column chromatography (silica gel, ethyl acetate/hexanes=1:3) to give 1-(1-isocyanopentane-1-sulfonyl)-4-methylbenzene (65.7 g, 87%) as an oil. Under N2-atmosphere, sodium hydride (60% dispersion in mineral oil, 11.0 g, 0.275 mol) was added in portions to a solution of ethyl 7-bromo-2,2-dimethylheptanoate (72.8 g, 0.27 mol) and 1-(1-isocyanopentane-1-sulfonyl)-4-methylbenzene (69.0 g, 0.27 mol) in DMSO (500 mL) and diethyl ether (500 mL) at room temperature. After 30 min, tetrabutylammonium iodide (8.0 g, 21.7 mmol) was added and the mixture was stirred for 5 h. A precipitate formed and additional DMSO (500 mL) was added. After stirring overnight at room temperature, the mixture was heated to reflux for 3 h. Water (500 mL) and diethyl ether (500 mL) were added and the layers were separated. The aqueous layer was extracted with diethyl ether (4×200 mL). The combined organic layers were washed with water (500 mL) and saturated NaCl solution (300 mL), dried over MgSO4, and concentrated in vacuo to give crude 8-isocyano-2,2-dimethyl-8-(toluene-4-sulfonyl)-dodecanoic acid ethyl ester (126.2 g) as a dark oil, which was used without further purification. Concentrated, hydrochloric acid (200 mL) was added slowly to a solution of crude 8-isocyano-2,2-dimethyl-8-(toluene-4-sulfonyl)-dodecanoic acid ethyl ester (126.2 g, 0.29 mol) in methylene chloride (300 mL). The reaction mixture was stirred at room temperature for 4 h. Water (500 mL) was added. The aqueous layer was separated and extracted with methylene chloride (3×100 mL). The organic solutions were combined, washed with water (300 mL) and saturated, aqueous NaHCO3 solution (200 mL) and dried over MgSO4. The solvent was evaporated and the residue was purified by column chromatography (silica gel, ethyl acetate/hexanes=1:10) to yield 2,2-dimethyl-8-oxododecanoic acid ethyl ester (69.6 g, 89%) as an oil. 1H NMR (300 MHz, CDCl3/TMS): δ (ppm): 4.1 (q, J=7.3 Hz, 2H), 2.40-2.31 (m, 4H), 1.58-1.45 (m, 6H), 1.31-1.19 (m, 6H), 1.22 (t, 3H, J=7.3 Hz), 1.12 (s, 6H), 0.88 (t, J=7.3 Hz, 3H). 13C NMR (75 MHz, CDCl3/TMS): δ (ppm): 210.5, 178.0, 60.5, 42.5, 42.0, 30.0, 27.0, 26.0, 25.5, 24.0, 23.0, 14.5, 14.0. HRMS (LSIMS, gly): Calcd for C16H31O3 (MH+): 271.2273. found: 271.2275. HPLC: 84% pure. A precipitate formed After stirring overnight at room temperature the mixture was heated to reflux for 3 h the layers were separated The aqueous layer was extracted with diethyl ether (4×200 mL) The combined organic layers were washed with water (500 mL) and saturated NaCl solution (300 mL) dried over MgSO4 concentrated in vacuo