pentane-1,3-diamine

反応条件: temp:0.00; pressure:0.00; stir:

反応条件: temp:0.00; pressure:0.00; stir:

反応条件: temp:0.00; pressure:0.00; stir:

反応条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

実験手順: To a solution of 4.4 grams of polyoctadecyl carbamate-co-vinyl acetate having 50 mole % octadecyl carbamate (prepared in xylene at 40 percent solids as described above) and 1.58 grams of polyvinyl butyral (available under the trade designation "BUTVAR" B72 from Monsanto Company, St. Louis, Mo.) in a solvent mixture of 178.6 grams of 2-propanol, 20.6 grams of xylene and 59.9 grams of heptane was added 0.40 grams of 5,000 Mn polydimethylsiloxane diamine (PDMS, prepared following U.S. Pat. No. 5,512,650) and 0.50 grams of 1,3-diaminopentane (available under the trade designation "DYTEK" EP from DuPont) with stirring at 25° C. Next, 1.10 grams of isophorone diisocyanate (IPDI available from Huls or Bayer) was added at 25° C. with stirring and a slow nitrogen purge. The mixture was stirred for 30 minutes, and, in the presence of the polyoctadecyl carbamate-co-vinyl acetate and the polyvinyl butyral, the IPDI reacted with the PDMS diamine and the 1,3-diaminopentane to form a polydiorganosiloxane urea-containing component with 20 weight % PDMS and 80 weight % 1,3-diaminopentane/IPDI. The final product mixture was a homogeneous, hazy, approximately 3% solids solution of a polymer component (polyoctadecyl carbamate-co-vinyl acetate), a polydiorganosiloxane urea-containing component and polyvinyl butyral in a 55:25:20 solids weight ratio. prepared a slow nitrogen purge The mixture was stirred for 30 minutes in the presence of the polyoctadecyl carbamate-co-vinyl acetate and the polyvinyl butyral, the IPDI reacted with the PDMS diamine

反応条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

実験手順: To a solution of 4.4 grams of polyoctadecyl carbamate-co-vinyl acetate having 50 mole % octadecyl carbamate (prepared in xylene at 40 percent solids as described above) and 1.58 grams of polyvinyl butyral (available under the trade designation "BUTVAR" B72 from Monsanto Company, St. Louis, Mo.) in a solvent mixture of 178.6 grams of 2-propanol, 20.6 grams of xylene and 59.9 grams of heptane was added 0.40 grams of 5,000 Mn polydimethylsiloxane diamine (PDMS, prepared following U.S. Pat. No. 5,512,650) and 0.50 grams of 1,3-diaminopentane (available under the trade designation "DYTEK" EP from DuPont) with stirring at 25° C. Next, 1.10 grams of isophorone diisocyanate (IPDI available from Huls or Bayer) was added at 25° C. with stirring and a slow nitrogen purge. The mixture was stirred for 30 minutes, and, in the presence of the polyoctadecyl carbamate-co-vinyl acetate and the polyvinyl butyral, the IPDI reacted with the PDMS diamine and the 1,3-diaminopentane to form a polydiorganosiloxane urea-containing component with 20 weight % PDMS and 80 weight % 1,3-diaminopentane/IPDI. The final product mixture was a homogeneous, hazy, approximately 3% solids solution of a polymer component (polyoctadecyl carbamate-co-vinyl acetate), a polydiorganosiloxane urea-containing component and polyvinyl butyral in a 55:25:20 solids weight ratio. prepared a slow nitrogen purge The mixture was stirred for 30 minutes in the presence of the polyoctadecyl carbamate-co-vinyl acetate and the polyvinyl butyral, the IPDI reacted with the PDMS diamine

反応条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

実験手順: To a solution of 4.4 grams of polyoctadecyl carbamate-co-vinyl acetate having 50 mole % octadecyl carbamate (prepared in xylene at 40 percent solids as described above) and 1.58 grams of polyvinyl butyral (available under the trade designation "BUTVAR" B72 from Monsanto Company, St. Louis, Mo.) in a solvent mixture of 178.6 grams of 2-propanol, 20.6 grams of xylene and 59.9 grams of heptane was added 0.40 grams of 5,000 Mn polydimethylsiloxane diamine (PDMS, prepared following U.S. Pat. No. 5,512,650) and 0.50 grams of 1,3-diaminopentane (available under the trade designation "DYTEK" EP from DuPont) with stirring at 25° C. Next, 1.10 grams of isophorone diisocyanate (IPDI available from Huls or Bayer) was added at 25° C. with stirring and a slow nitrogen purge. The mixture was stirred for 30 minutes, and, in the presence of the polyoctadecyl carbamate-co-vinyl acetate and the polyvinyl butyral, the IPDI reacted with the PDMS diamine and the 1,3-diaminopentane to form a polydiorganosiloxane urea-containing component with 20 weight % PDMS and 80 weight % 1,3-diaminopentane/IPDI. The final product mixture was a homogeneous, hazy, approximately 3% solids solution of a polymer component (polyoctadecyl carbamate-co-vinyl acetate), a polydiorganosiloxane urea-containing component and polyvinyl butyral in a 55:25:20 solids weight ratio. prepared a slow nitrogen purge The mixture was stirred for 30 minutes in the presence of the polyoctadecyl carbamate-co-vinyl acetate and the polyvinyl butyral, the IPDI reacted with the PDMS diamine

反応条件: temp:0.00; pressure:0.00; stir:

反応条件: temp:90.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

実験手順: Fifty grams of 1,3-diaminopentane (99%, 0.485 mole), 116 g (1.07 moles) adiponitrile and 2.3 g Raney® nickel were charged to a 300 cc autoclave reactor. The mixture was stirred and heated at 90° C. and 650 psig hydrogen pressure for 10 hours. The mixture was cooled and filtered under nitrogen. Capillary GC analysis of the filtered product indicated a 56% conversion of 1,3-diaminopentane and 59% yield of 2-(4-cyanobutyl)-4-ethylhexahydropyrimidine. The mixture was cooled filtered under nitrogen

反応条件: temp:90.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

実験手順: Ninety grams (96.8% purity, 0.854 mole) 1,3-diaminopentane, 60 g acetonitrile (1.46 moles) and 3 g Cr promoted Raney® cobalt catalyst were charged to a 300 ml autoclave described in Example 1. The mixture was stirred and heated at 90° C. and 650 psig pressure for 5 hours followed by cooling to 25° C. Analysis of the filtered product on a capillary GC column showed a 14% conversion of 1,3-diaminopentane and 96.2% yield of 2-methyl-4-ethylhexahydropyrimidine by cooling to 25° C

反応条件: temp:90.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

実験手順: Ninety grams (96.8% purity, 0.854 mole) 1,3-diaminopentane, 60 g acetonitrile (1.46 moles) and 3 g powdered nickel on alumina catalyst were charged to a 300 ml autoclave described in Example 1. The mixture was stirred and heated at 90° C. and 650 psig pressure for 6 hours followed by cooling to 25° C. Analysis of the filtered product on a capillary GC column showed a 42.9% conversion of 1,3-diaminopentane and 94% yield of 2-methyl-4-ethylhexahydropyrimidine. were charged to a 300 ml autoclave by cooling to 25° C

反応条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

実験手順: Sixty grams of 1,3-diaminopentane (96.7% purity, 0.569 mole), 60 g acetonitrile (1.46 moles) and 1 g of wet Raney® nickel (Raney 2800) catalyst were charged to a 300 ml stainless steel autoclave reactor. The mixture was stirred and heated at 90° C. and 500 psig hydrogen pressure for 6 hours. Capillary GC analysis of the cooled product indicated a 36% conversion of 1,3-diaminopentane and 97.4% yield of 2-methyl-4-ethylhexahydropyrimidine. The reactor was recharged with 25 ml (19.5 g) additional acetonitrile and run at 90° C. and 500 psig for 21 hours. Capillary GC analysis of the mixture indicated a 92.1% conversion of 1,3-diaminopentane and 98% yield of 2-methyl-4-ethylhexahydropyrimidine, b.p. 71° C./20 mm Hg. The structure was confirmed by comparison with a mass spectrum of the hexahydropyrimidine obtained by the condensation of 1,3-diaminopentane and acetaldehyde at 50° C. run at 90° C.

反応条件: temp:90.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

実験手順: Sixty grams of 1,3-diaminopentane (96.7% purity, 0.569 mole), 60 g acetonitrile (1.46 moles) and 1 g of wet Raney® nickel (Raney 2800) catalyst were charged to a 300 ml stainless steel autoclave reactor. The mixture was stirred and heated at 90° C. and 500 psig hydrogen pressure for 6 hours. Capillary GC analysis of the cooled product indicated a 36% conversion of 1,3-diaminopentane and 97.4% yield of 2-methyl-4-ethylhexahydropyrimidine. The reactor was recharged with 25 ml (19.5 g) additional acetonitrile and run at 90° C. and 500 psig for 21 hours. Capillary GC analysis of the mixture indicated a 92.1% conversion of 1,3-diaminopentane and 98% yield of 2-methyl-4-ethylhexahydropyrimidine, b.p. 71° C./20 mm Hg. The structure was confirmed by comparison with a mass spectrum of the hexahydropyrimidine obtained by the condensation of 1,3-diaminopentane and acetaldehyde at 50° C.