ditert-butyl(methyl)phosphane

反応条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

実験手順: In a 300 ml four-necked flask thoroughly purged with nitrogen, 9.0 g (0.05 mol) of di-tert-butylphosphinous chloride, 0.025 g (0.25 mol (corresponding to 0.5% by mol)) of copper(I) chloride and 30 ml of tetrahydrofuran were placed. To the contents of the flask, 55 ml (0.055 mol) of a tetrahydrofuran solution of methylmagnesium bromide having a concentration of 1 mol/liter was dropwise added over a period of 1 hour with maintaining the temperature at 25° C. to 30° C. After the dropwise addition was completed, stirring was conducted at the same temperature for 5 hours. Then, disappearance of di-tert-butylphosphinous chloride was confirmed by gas chromatography. Thereafter, 40 ml of toluene and 40 ml of water were added to the reaction solution to perform liquid separation. Then, the organic layer was washed with water and dried over anhydrous sodium sulfate. The solvent was distilled off under reduced pressure, followed by further distillation. Then, fractions given by distillation at 750° C. to 810° C. under reduced pressure of 20 Torr were collected. As a result, 7.4 g (purity: 98.7%) of the aimed di-tert-butylmethylphosphine was obtained as an oily substance. The yield was 91.1%. with maintaining the temperature at 25° C. to 30° C After the dropwise addition liquid separation Then, the organic layer was washed with water dried over anhydrous sodium sulfate The solvent was distilled off under reduced pressure followed by further distillation Then, fractions given by distillation at 750° C. to 810° C. under reduced pressure of 20 Torr were collected