2,5-dimethyl-1H-pyrrole

反応条件: temp:0.00; pressure:0.00; stir:

反応条件: temp:0.00; pressure:0.00; stir:

反応条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

実験手順: Rees et al. in further studies, ibid., pp. 687-91 (1965), reported that the condensation of phthalaldehydic acid could be extended to pyrroles and found that phthalaldehydic acid reacted with pyrrole and 2,5-dimethyl pyrrole in boiling benzene in the absence of an external catalyst to give high yields of 2-phthalidyl-pyrrole and 3-phthalidylpyrrole, respectively. In these reactions, it was observed that pyrrole tended to substitute in the 2-position when possible to yield the 2-phthalidyl derivative. In a further extension of the reactions, the authors found that naphthalaldehydic acid, though less reactive than phthalaldehydic acid, behaved in a similar manner and could be condensed with indole under fusion conditions to yield 3-naphthalidylindole. to give high

反応条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

実験手順: Rees et al. in further studies, ibid., pp. 687-91 (1965), reported that the condensation of phthalaldehydic acid could be extended to pyrroles and found that phthalaldehydic acid reacted with pyrrole and 2,5-dimethyl pyrrole in boiling benzene in the absence of an external catalyst to give high yields of 2-phthalidyl-pyrrole and 3-phthalidylpyrrole, respectively. In these reactions, it was observed that pyrrole tended to substitute in the 2-position when possible to yield the 2-phthalidyl derivative. In a further extension of the reactions, the authors found that naphthalaldehydic acid, though less reactive than phthalaldehydic acid, behaved in a similar manner and could be condensed with indole under fusion conditions to yield 3-naphthalidylindole. to give high

反応条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

実験手順: Manipulations of all reactants were carried out either in a dry box employing nitrogen, or in airless glassware employing vacuum or nitrogen. Tetrahydrofuran (THF), toluene, benzene, diethylbenzene (Aldrich, 97% mixture of 1,2-, 1,3-, 1,4- isomers) and pentane were purified by distillation over sodium-benzophenone ketyl under nitrogen, then degassed via a nitrogen purge. Dimethoxyethane (DME) (Aldrich, anhydrous) was degassed via nitrogen purge and used without further purification. Pyrrole (Aldrich, 98%) was vacuum distilled over sodium, then degassed via nitrogen purge. 2,5-Dimethylpyrrole was dried with calcium sulfate and vacuum distilled. Sodium 2,5-dimethylpyrrolide (NaC6H8N) was prepared by reacting 2,5-dimethylpyrrole with an excess of sodium (40% by weight dispersion in mineral spirits) in refluxing tetrahydrofuran under nitrogen. Sodium pyrrolide was prepared by reacting pyrrole with an equivalent molar amount (1:1) of NaH (Aldrich, 60% by weight in mineral oil) or sodium (40% dispersion by weight in mineral spirits) in dimethoxyethane or tetrahydrofuran (THF) at ambient temperature under nitrogen. Triethylaluminum (TEA) (Aldrich 1.0M, hexanes and 1.9M toluene) was used as received. Ketjen Grade B alumina (Al2O3) and Davison 952 silica (SiO2) were the commercial materials used as supports for catalyst preparations. Fluorided-alumina (F/Al2O3, 15 wt % F) was prepared by the addition of a solution of NH4HF2 in ethanol to Ketjen Grade B alumina. Phosphated silica (P/SiO2, P/Si molar ratio=0.1) was prepared by the addition of a 10% H3PO4 /methanol solution to Davison 952 silica. The aluminophosphate (AlPO4) used in the following experiments was made as described in McDaniel at al, U.S. Pat. No. 4,364,855 (1982). The supports were activated by placing up to 25 g into a fritted quartz tube, fluidizing with air and calcining at 700° C., except for P/SiO2 at 350° C., for 3 hours. The air stream was switched to nitrogen until the support cooled to ambient temperature. Manipulations of all reactants were carried out either in a dry box Tetrahydrofuran (THF), toluene, benzene, diethylbenzene (Aldrich, 97% mixture of 1,2-, 1,3-, 1,4- isomers) and pentane were purified by distillation over sodium-benzophenone ketyl under nitrogen degassed via a nitrogen purge Dimethoxyethane (DME) (Aldrich, anhydrous) was degassed via nitrogen purge used without further purification distilled over sodium degassed via nitrogen purge 2,5-Dimethylpyrrole was dried with calcium sulfate and vacuum distilled at ambient temperature by placing up to 25 g into a fritted quartz tube

反応条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

実験手順: Manipulations of all reactants were carried out either in a dry box employing nitrogen, or in airless glassware employing vacuum or nitrogen. Tetrahydrofuran (THF), toluene, benzene, diethylbenzene (Aldrich, 97% mixture of 1,2-, 1,3-, 1,4- isomers) and pentane were purified by distillation over sodium-benzophenone ketyl under nitrogen, then degassed via a nitrogen purge. Dimethoxyethane (DME) (Aldrich, anhydrous) was degassed via nitrogen purge and used without further purification. Pyrrole (Aldrich, 98%) was vacuum distilled over sodium, then degassed via nitrogen purge. 2,5-Dimethylpyrrole was dried with calcium sulfate and vacuum distilled. Sodium 2,5-dimethylpyrrolide (NaC6H8N) was prepared by reacting 2,5-dimethylpyrrole with an excess of sodium (40% by weight dispersion in mineral spirits) in refluxing tetrahydrofuran under nitrogen. Sodium pyrrolide was prepared by reacting pyrrole with an equivalent molar amount (1:1) of NaH (Aldrich, 60% by weight in mineral oil) or sodium (40% dispersion by weight in mineral spirits) in dimethoxyethane or tetrahydrofuran (THF) at ambient temperature under nitrogen. Triethylaluminum (TEA) (Aldrich 1.0M, hexanes and 1.9M toluene) was used as received. Ketjen Grade B alumina (Al2O3) and Davison 952 silica (SiO2) were the commercial materials used as supports for catalyst preparations. Fluorided-alumina (F/Al2O3, 15 wt % F) was prepared by the addition of a solution of NH4HF2 in ethanol to Ketjen Grade B alumina. Phosphated silica (P/SiO2, P/Si molar ratio=0.1) was prepared by the addition of a 10% H3PO4 /methanol solution to Davison 952 silica. The aluminophosphate (AlPO4) used in the following experiments was made as described in McDaniel at al, U.S. Pat. No. 4,364,855 (1982). The supports were activated by placing up to 25 g into a fritted quartz tube, fluidizing with air and calcining at 700° C., except for P/SiO2 at 350° C., for 3 hours. The air stream was switched to nitrogen until the support cooled to ambient temperature. Manipulations of all reactants were carried out either in a dry box Tetrahydrofuran (THF), toluene, benzene, diethylbenzene (Aldrich, 97% mixture of 1,2-, 1,3-, 1,4- isomers) and pentane were purified by distillation over sodium-benzophenone ketyl under nitrogen degassed via a nitrogen purge Dimethoxyethane (DME) (Aldrich, anhydrous) was degassed via nitrogen purge used without further purification distilled over sodium degassed via nitrogen purge 2,5-Dimethylpyrrole was dried with calcium sulfate and vacuum distilled at ambient temperature by placing up to 25 g into a fritted quartz tube

反応条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

実験手順: Rees et al. in further studies, ibid., pp. 687-91 (1965), reported that the condensation of phthalaldehydic acid could be extended to pyrroles and found that phthalaldehydic acid reacted with pyrrole and 2,5-dimethyl pyrrole in boiling benzene in the absence of an external catalyst to give high yields of 2-phthalidyl-pyrrole and 3-phthalidylpyrrole, respectively. In these reactions, it was observed that pyrrole tended to substitute in the 2-position when possible to yield the 2-phthalidyl derivative. In a further extension of the reactions, the authors found that naphthalaldehydic acid, though less reactive than phthalaldehydic acid, behaved in a similar manner and could be condensed with indole under fusion conditions to yield 3-naphthalidylindole. to give high

反応条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

実験手順: Rees et al. in further studies, ibid., pp. 687-91 (1965), reported that the condensation of phthalaldehydic acid could be extended to pyrroles and found that phthalaldehydic acid reacted with pyrrole and 2,5-dimethyl pyrrole in boiling benzene in the absence of an external catalyst to give high yields of 2-phthalidyl-pyrrole and 3-phthalidylpyrrole, respectively. In these reactions, it was observed that pyrrole tended to substitute in the 2-position when possible to yield the 2-phthalidyl derivative. In a further extension of the reactions, the authors found that naphthalaldehydic acid, though less reactive than phthalaldehydic acid, behaved in a similar manner and could be condensed with indole under fusion conditions to yield 3-naphthalidylindole. to give high

反応条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

実験手順: Rees et al. in further studies, ibid., pp. 687-91 (1965), reported that the condensation of phthalaldehydic acid could be extended to pyrroles and found that phthalaldehydic acid reacted with pyrrole and 2,5-dimethyl pyrrole in boiling benzene in the absence of an external catalyst to give high yields of 2-phthalidyl-pyrrole and 3-phthalidylpyrrole, respectively. In these reactions, it was observed that pyrrole tended to substitute in the 2-position when possible to yield the 2-phalidyl derivative. In a further extension of the reactions, the authors found that naphthalaldehydic acid, though less reactive than phthalaldehydic acid, behaved in a similar manner and could be condensed with indole under fusion conditions to yield 3-naphthalidylindole. to give high

反応条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

実験手順: Manipulations of all reactants were carried out either in a drybox employing nitrogen, or in airless glassware employing vacuum or nitrogen. Tetrahydrofuran (THF), toluene, benzene, diethylbenzene (Aldrich, 97% mixture of 1,2-, 1,3-, 1,4- Isomers) and pentane were purified by distillation over sodium-benzophenone ketyl under nitrogen, then degassed via a nitrogen purge. Dimethoxyethane (DME) (Aldrich, anhydrous) was degassed via nitrogen purge and used without further purification. Pyrrole (Aldrich, 98%) was vacuum distilled over sodium, then degassed via nitrogen purge. 2,5-Dimethylpyrrole was dried with calcium sulfate and vacuum distilled. Sodium 2,5-dimethylpyrrolide (NaC6H8N) was prepared by reacting 2,5-dimethylpyrrole with an excess of sodium (40% by weight dispersion in mineral spirits) in refluxing tetrahydrofuran under nitrogen. Sodium pyrrolide was prepared by reacting pyrrole with an equivalent molar amount (1:1) of NaH (Aldrich, 60% by weight in mineral oil) or sodium (40% dispersion by weight in mineral spirits) in dimethoxyethane or tetrahydrofuran (THF) at ambient temperature under nitrogen. Triethylaluminum (TEA) (Aldrich 1.0M, hexanes and 1.9M toluene) was used as received. Ketjen Grade B alumina (Al2O3) and Davison 952 silica (SiO2) were the commercial materials used as supports for catalyst preparations. Fluorided-alumina (F/Al2O3, 15 wt % F) was prepared by the addition of a solution of NH4HF2 in methanol to Ketjen Grade B alumina. Phosphated silica (P/SiO2, P/Si molar ratio=0.1) was prepared by the addition of a 10% H3 PO4 /methanol solution to Davison 952 silica. The aluminophosphate (AlPO4) used in the following experiments was made as described in McDaniel et al, U.S. Pat. No. 4,364,855 (1982). The supports were activated by placing up to 25 g into a fritted quartz tube, fluidizing with air and calcining at 700° C., except for P/SiO2 at 350° C., for 3 hours. The air stream was switched to nitrogen until the support cooled to ambient temperature. Tetrahydrofuran (THF), toluene, benzene, diethylbenzene (Aldrich, 97% mixture of 1,2-, 1,3-, 1,4- Isomers) and pentane were purified by distillation over sodium-benzophenone ketyl under nitrogen degassed via a nitrogen purge Dimethoxyethane (DME) (Aldrich, anhydrous) was degassed via nitrogen purge used without further purification distilled over sodium degassed via nitrogen purge 2,5-Dimethylpyrrole was dried with calcium sulfate and vacuum distilled at ambient temperature by placing up to 25 g into a fritted quartz tube

反応条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

実験手順: To a mechanically stirred suspension of 12.3 g (0.1 mole) of 2-amino-4,6-dimethylpyrimidine in 200 ml of dry dichloromethane maintained at 0° to 5° C. under a nitrogen atmosphere was added dropwise over 30 minutes a solution of 9.2 ml (0.1 mole) of chlorosulfonyl isocyanate in 50 ml of ice-cold dichloromethane. After 30 minutes at 0° to 5° C. the resulting yellow solution was treated dropwise over 15 minutes with 20 ml (0.197 mole) of 2,5-dimethylpyrrole. This mixture was stirred 30 minutes at 0° to 5° C. and allowed to stand overnight at room temperature. maintained at 0° to 5° C. under a nitrogen atmosphere to stand overnight at room temperature

反応条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

実験手順: To a mechanically stirred suspension of 12.3 g (0.1 mole) of 2-amino-4,6-dimethylpyrimidine in 200 ml of dry dichloromethane maintained at 0° to 5° C. under a nitrogen atmosphere was added dropwise over 30 minutes a solution of 9.2 ml (0.1 mole) of chlorosulfonyl isocyanate in 50 ml of ice-cold dichloromethane. After 30 minutes at 0° to 5° C. the resulting yellow solution was treated dropwise over 15 minutes with 20 ml (0.197 mole) of 2,5-dimethylpyrrole. This mixture was stirred 30 minutes at 0° to 5° C. and allowed to stand overnight at room temperature. maintained at 0° to 5° C. under a nitrogen atmosphere to stand overnight at room temperature