1-Iododec-1-yne

反応条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

実験手順: Pyrollidine (20 mL) and CuI (0.65 g, 3.42 mmol) were added to a nitrogen flushed reaction vessel. Nona-1,8-diyne (1.58 g, 13.17 mmol) was added via syringe. 1-Iodo-1decyne (2.26 g, 8.53 mmol) was added via syringe dropwise to the solution over ten minutes. The reaction was stirred under nitrogen for 24 h. The reaction mix was then quenched with ammonium chloride (10 mL), separated with diethyl ether, and dried with anhydrous magnesium sulfate. Nonadeca-1,8,10-triyne was then isolated using silica column chromatography with a 1% ether/hexane eluting solution obtaining 1.06 g of an oil. 50% yield; 1H NMR (CDCl3) δ 2.29 (m, 4H, CH2—C≡C), 2.22 (dt, 2H, CH2—C≡C, J=7, 2.7 Hz), 1.97 (t, 1H, H—C≡C, J=2.7 Hz), 1.54 (m, 6H, CH2—C—C≡C), 1.33-1.40 (sextuplet, 2H, CH2—CH2—CH3), 1.27 (m, 10H, C—CH2—C), 0.88 (t, 3H, CH3); 13C NMR (CDCl3) δ: 84.62, 77.99, 77.36, 68.63, 65.76, 65.45, 32.21, 29.54, 29.46, 29.25, 28.72, 28.34, 28.31, 28.23, 23.06, 19.61, 19.52, 14.53; MS (ESI) [M+Na]+ calc. 279.2083 found 279.1723 (very unstable to any MS technique). Elemental analysis calc. for C19H28: C, 88.99; H, 11.01. Found: C, 88.80; H, 10.96. flushed reaction vessel The reaction mix was then quenched with ammonium chloride (10 mL) separated with diethyl ether dried with anhydrous magnesium sulfate

反応条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

実験手順: Pyrollidine (20 mL) and CuI (0.65 g, 3.42 mmol) were added to a nitrogen flushed reaction vessel. Nona-1,8-diyne (1.58 g, 13.17 mmol) was added via syringe. 1-Iodo-1decyne (2.26 g, 8.53 mmol) was added via syringe dropwise to the solution over ten minutes. The reaction was stirred under nitrogen for 24 h. The reaction mix was then quenched with ammonium chloride (10 mL), separated with diethyl ether, and dried with anhydrous magnesium sulfate. Nonadeca-1,8,10-triyne was then isolated using silica column chromatography with a 1% ether/hexane eluting solution obtaining 1.06 g of an oil. 50% yield; 1H NMR (CDCl3) δ 2.29 (m, 4H, CH2—C≡C), 2.22 (dt, 2H, CH2—C≡C, J=7, 2.7 Hz), 1.97 (t, 1H, H—C≡C, J=2.7 Hz), 1.54 (m, 6H, CH2—C—C≡C), 1.33-1.40 (sextuplet, 2H, CH2—CH2—CH3), 1.27 (m, 10H, C—CH2—C), 0.88 (t, 3H, CH3); 13C NMR (CDCl3) δ: 84.62, 77.99, 77.36, 68.63, 65.76, 65.45, 32.21, 29.54, 29.46, 29.25, 28.72, 28.34, 28.31, 28.23, 23.06, 19.61, 19.52, 14.53; MS (ESI) [M+Na]+ calc. 279.2083 found 279.1723 (very unstable to any MS technique). Elemental analysis calc. for C19H28: C, 88.99; H, 11.01. Found: C, 88.80; H, 10.96. flushed reaction vessel The reaction mix was then quenched with ammonium chloride (10 mL) separated with diethyl ether dried with anhydrous magnesium sulfate

反応条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

実験手順: Pyrollidine (20 mL) and CuI (0.65 g, 3.42 mmol) were added to a nitrogen flushed reaction vessel. Nona-1,8-diyne (1.58 g, 13.17 mmol) was added via syringe. 1-Iodo-1decyne (2.26 g, 8.53 mmol) was added via syringe dropwise to the solution over ten minutes. The reaction was stirred under nitrogen for 24 h. The reaction mix was then quenched with ammonium chloride (10 mL), separated with diethyl ether, and dried with anhydrous magnesium sulfate. Nonadeca-1,8,10-triyne was then isolated using silica column chromatography with a 1% ether/hexane eluting solution obtaining 1.06 g of an oil. 50% yield; 1H NMR (CDCl3) δ 2.29 (m, 4H, CH2—C≡C), 2.22 (dt, 2H, CH2—C≡C, J=7, 2.7 Hz), 1.97 (t, 1H, H—C≡C, J=2.7 Hz), 1.54 (m, 6H, CH2—C—C≡C), 1.33-1.40 (sextuplet, 2H, CH2—CH2-CH3), 1.27 (m, 10H, C—CH2—C), 0.88 (t, 3H, CH3); 13C NMR (CDCl3) δ: 84.62, 77.99, 77.36, 68.63, 65.76, 65.45, 32.21, 29.54, 29.46, 29.25, 28.72, 28.34, 28.31, 28.23, 23.06, 19.61, 19.52, 14.53; MS (ESI) [M+Na]+calc. 279.2083 found 279.1723 (very unstable to any MS technique). Elemental analysis calc. for C19H28: C, 88.99; H, 11.01. Found: C, 88.80; H, 10.96. flushed reaction vessel The reaction mix was then quenched with ammonium chloride (10 mL) separated with diethyl ether dried with anhydrous magnesium sulfate

反応条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

実験手順: Pyrollidine (20 mL) and CuI (0.65 g, 3.42 mmol) were added to a nitrogen flushed reaction vessel. Nona-1,8-diyne (1.58 g, 13.17 mmol) was added via syringe. 1-Iodo-1decyne (2.26 g, 8.53 mmol) was added via syringe dropwise to the solution over ten minutes. The reaction was stirred under nitrogen for 24 h. The reaction mix was then quenched with ammonium chloride (10 mL), separated with diethyl ether, and dried with anhydrous magnesium sulfate. Nonadeca-1,8,10-triyne was then isolated using silica column chromatography with a 1% ether/hexane eluting solution obtaining 1.06 g of an oil. 50% yield; 1H NMR (CDCl3) δ 2.29 (m, 4H, CH2—C≡C), 2.22 (dt, 2H, CH2—C≡C, J=7, 2.7 Hz), 1.97 (t, 1H, H—C≡C, J=2.7 Hz), 1.54 (m, 6H, CH2—C—C≡C), 1.33-1.40 (sextuplet, 2H, CH2—CH2-CH3), 1.27 (m, 10H, C—CH2—C), 0.88 (t, 3H, CH3); 13C NMR (CDCl3) δ: 84.62, 77.99, 77.36, 68.63, 65.76, 65.45, 32.21, 29.54, 29.46, 29.25, 28.72, 28.34, 28.31, 28.23, 23.06, 19.61, 19.52, 14.53; MS (ESI) [M+Na]+calc. 279.2083 found 279.1723 (very unstable to any MS technique). Elemental analysis calc. for C19H28: C, 88.99; H, 11.01. Found: C, 88.80; H, 10.96. flushed reaction vessel The reaction mix was then quenched with ammonium chloride (10 mL) separated with diethyl ether dried with anhydrous magnesium sulfate

反応条件: temp:15.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

実験手順: To a 500 ml 3-neck round bottom flask is transferred an ethylmagnesium bromide solution, 100 ml of 3.0M in dried ether, 0.30 mole, under an argon atmosphere. The contents are cooled to about 0° to 3° C. in a solution of 1-decyne, 25 grams, 0.1808 mole, and 50 ml of dried ether are added dropwise into the reaction mixture over a period of 1.5 hours. Thereafter the mixture is warmed to 35°-38° C. and maintained at that temperature for an additional hour. The mixture is then cooled to about 15° C. and powdered iodine, 80 g., 0.315 mole, is slowly added through a solid addition funnel over a period of about 1.5 hours. The reaction is maintained at 30° C. for approximately 2.5 additional hours. In the meantime, an additional 150 ml of dried ether is added to limit the viscosity increase during the reaction. In the work-up process, 200-300 ml of ether are added and the contents hydrolyzed by slowly pouring them into two liters of cold, dilute acetic acid having a pH of about 1-2. The organic phase is extracted with ether and washed several times with 10 percent Na2S2O3 solution to remove the unreacted iodine. Washing continues until the organic phase exhibits a clear color. Following this, the phase is washed several times with water and dried over MgSO4. The solvent is removed by means of a rotary evaporator, and the oily crude product is purified by column chromatography, using silica gel absorbent and hexane as an eluent. The yield is about 90 percent based on 1-decyne used, of a pale yellow liquid, 43.0 grams, 0.1629 mole. To a 500 ml 3-neck round bottom flask is transferred are added dropwise into the reaction mixture over a period of 1.5 hours Thereafter the mixture is warmed to 35°-38° C. maintained at that temperature for an additional hour , 0.315 mole, is slowly added through a solid addition funnel over a period of about 1.5 hours The reaction is maintained at 30° C. for approximately 2.5 additional hours increase during the reaction The organic phase is extracted with ether washed several times with 10 percent Na2S2O3 solution to remove the unreacted iodine Washing is washed several times with water dried over MgSO4 The solvent is removed by means of a rotary evaporator the oily crude product is purified by column chromatography

反応条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

実験手順: Pyrollidine (20 mL) and CuI (0.65 g, 3.42 mmol) were added to a nitrogen flushed reaction vessel. Nona-1,8-diyne (1.58 g, 13.17 mmol) was added via syringe. 1-Iodo-1decyne (2.26 g, 8.53 mmol) was added via syringe dropwise to the solution over ten minutes. The reaction was stirred under nitrogen for 24 h. The reaction mix was then quenched with ammonium chloride (10 mL), separated with diethyl ether, and dried with anhydrous magnesium sulfate. Nonadeca-1,8,10-triyne was then isolated using silica column chromatography with a 1% ether/hexane eluting solution obtaining 1.06 g of an oil. 50% yield; 1H NMR (CDCl3) δ 2.29 (m, 4H, CH2—C≡C), 2.22 (dt, 2H, CH2—C≡C, J=7, 2.7 Hz), 1.97 (t, 1H, H—C≡C, J=2.7 Hz), 1.54 (m, 6H, CH2—C—C≡C), 1.33-1.40 (sextuplet, 2H, CH2—CH2—CH3), 1.27 (m, 10H, C—CH2—C), 0.88 (t, 3H, CH3); 13C NMR (CDCl3) δ: 84.62, 77.99, 77.36, 68.63, 65.76, 65.45, 32.21, 29.54, 29.46, 29.25, 28.72, 28.34, 28.31, 28.23, 23.06, 19.61, 19.52, 14.53; MS (ESI) [M+Na]+ calc. 279.2083 found 279.1723 (very unstable to any MS technique). Elemental analysis calc. for C19H28: C, 88.99; H, 11.01. Found: C, 88.80; H, 10.96. flushed reaction vessel The reaction mix was then quenched with ammonium chloride (10 mL) separated with diethyl ether dried with anhydrous magnesium sulfate

反応条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

実験手順: Pyrollidine (20 mL) and CuI (0.65 g, 3.42 mmol) were added to a nitrogen flushed reaction vessel. Nona-1,8-diyne (1.58 g, 13.17 mmol) was added via syringe. 1-Iodo-1decyne (2.26 g, 8.53 mmol) was added via syringe dropwise to the solution over ten minutes. The reaction was stirred under nitrogen for 24 h. The reaction mix was then quenched with ammonium chloride (10 mL), separated with diethyl ether, and dried with anhydrous magnesium sulfate. Nonadeca-1,8,10-triyne was then isolated using silica column chromatography with a 1% ether/hexane eluting solution obtaining 1.06 g of an oil. 50% yield; 1H NMR (CDCl3) δ 2.29 (m, 4H, CH2—C≡C), 2.22 (dt, 2H, CH2—C≡C, J=7, 2.7 Hz), 1.97 (t, 1H, H—C≡C, J=2.7 Hz), 1.54 (m, 6H, CH2—C—C≡C), 1.33-1.40 (sextuplet, 2H, CH2—CH2—CH3), 1.27 (m, 10H, C—CH2—C), 0.88 (t, 3H, CH3); 13C NMR (CDCl3) δ: 84.62, 77.99, 77.36, 68.63, 65.76, 65.45, 32.21, 29.54, 29.46, 29.25, 28.72, 28.34, 28.31, 28.23, 23.06, 19.61, 19.52, 14.53; MS (ESI) [M+Na]+ calc. 279.2083. Found 279.1723 (very unstable to any MS technique). Elemental analysis calc. for C19H28: C, 88.99; H, 11.01. Found: C, 88.80; H, 10.96. flushed reaction vessel The reaction mix was then quenched with ammonium chloride (10 mL) separated with diethyl ether dried with anhydrous magnesium sulfate

反応条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

実験手順: Pyrollidine (20 mL) and CuI (0.65 g, 3.42 mmol) were added to a nitrogen flushed reaction vessel. Nona-1,8-diyne (1.58 g, 13.17 mmol) was added via syringe. 1-Iodo-1decyne (2.26 g, 8.53 mmol) was added via syringe dropwise to the solution over ten minutes. The reaction was stirred under nitrogen for 24 h. The reaction mix was then quenched with ammonium chloride (10 mL), separated with diethyl ether, and dried with anhydrous magnesium sulfate. Nonadeca-1,8,10-triyne was then isolated using silica column chromatography with a 1% ether/hexane eluting solution obtaining 1.06 g of an oil. 50% yield; 1H NMR (CDCl3) δ 2.29 (m, 4H, CH2—C≡C), 2.22 (dt, 2H, CH2—C≡C, J=7, 2.7 Hz), 1.97 (t, 1H, H—C≡C, J=2.7 Hz), 1.54 (m, 6H, CH2—C—C≡C), 1.33-1.40 (sextuplet, 2H, CH2—CH2—CH3), 1.27 (m, 10H, C—CH2—C), 0.88 (t, 3H, CH3); 13C NMR (CDCl3) δ: 84.62, 77.99, 77.36, 68.63, 65.76, 65.45, 32.21, 29.54, 29.46, 29.25, 28.72, 28.34, 28.31, 28.23, 23.06, 19.61, 19.52, 14.53; MS (ESI) [M+Na]+ calc. 279.2083 found 279.1723 (very unstable to any MS technique). Elemental analysis calc. for C19H28: C, 88.99; H, 11.01. Found: C, 88.80; H, 10.96. flushed reaction vessel The reaction mix was then quenched with ammonium chloride (10 mL) separated with diethyl ether dried with anhydrous magnesium sulfate

反応条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

実験手順: Pyrollidine (20 mL) and CuI (0.65 g, 3.42 mmol) were added to a nitrogen flushed reaction vessel. Nona-1,8-diyne (1.58 g, 13.17 mmol) was added via syringe. 1-Iodo-1decyne (2.26 g, 8.53 mmol) was added via syringe dropwise to the solution over ten minutes. The reaction was stirred under nitrogen for 24 h. The reaction mix was then quenched with ammonium chloride (10 mL), separated with diethyl ether, and dried with anhydrous magnesium sulfate. Nonadeca-1,8,10-triyne was then isolated using silica column chromatography with a 1% ether/hexane eluting solution obtaining 1.06 g of an oil. 50% yield; 1H NMR (CDCl3) δ 2.29 (m, 4H, CH2—C≡C), 2.22 (dt, 2H, CH2—C≡C, J=7, 2.7 Hz), 1.97 (t, 1H, H—C≡C, J=2.7 Hz), 1.54 (m, 6H, CH2—C—C≡C), 1.33-1.40 (sextuplet, 2H, CH2—CH2-CH3), 1.27 (m, 10H, C—CH2—C), 0.88 (t, 3H, CH3); 13C NMR (CDCl3) δ: 84.62, 77.99, 77.36, 68.63, 65.76, 65.45, 32.21, 29.54, 29.46, 29.25, 28.72, 28.34, 28.31, 28.23, 23.06, 19.61, 19.52, 14.53; MS (ESI) [M+Na]+calc. 279.2083 found 279.1723 (very unstable to any MS technique). Elemental analysis calc. for C19H28: C, 88.99; H, 11.01. Found: C, 88.80; H, 10.96. flushed reaction vessel The reaction mix was then quenched with ammonium chloride (10 mL) separated with diethyl ether dried with anhydrous magnesium sulfate