3-amino-1-morpholin-4-ylpropan-1-one

反応条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

実験手順: A nitrogen inerted reactor, equipped with a suitable reflux condenser and soxhlet extractor containing freshly activated 3A molecular sieves (4–8 mesh; 97.2 g), is charged with 3-amino-1-morpholin-4-yl-propan-1-one, compound with phenylacetic acid (765 mmol) and 2-[2-(4-fluorophenyl)-2-oxo-1-phenyl-ethyl]-4-methyl-3-oxo-pentanoic acid phenylamide (450 mmol). THF (360 mL) is added, and the resulting solution is stirred vigorously as the reaction is heated at reflux temperature for ca. 24 hours, during which time the product begins to precipitate. Half-saturated aqueous NaHCO3 (100 mL) is added, and the reaction mixture is cooled with continued stirring to ca. 0° C. MtBE (100 mL) is added, and the solids are collected via filtration. The solid is washed with distilled water (100 mL) and MtBE (2×100 mL), collected, and dried under vacuum at <50° C. to afford 5-(4-fluorophenyl)-2-isopropyl-1-(3-morpholin-4-yl-3-oxo-propyl)-4-phenyl-1H-pyrrole-3-carboxylic acid phenylamide as a white solid (194 g). This material is carried on to subsequent steps without further purification. A nitrogen inerted reactor, equipped with a suitable reflux condenser soxhlet extractor containing freshly is heated at reflux temperature for ca. 24 hours to precipitate Half-saturated aqueous NaHCO3 (100 mL) is added the reaction mixture is cooled with continued stirring to ca. 0° C MtBE (100 mL) is added the solids are collected via filtration The solid is washed with distilled water (100 mL) and MtBE (2×100 mL) collected dried under vacuum at <50° C.

反応条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

実験手順: A reactor is charged with 3-amino-1-morpholin-4-yl-propan-1-one; hydrochloride (765 mmol). MeOH (380 mL) is added, and the mixture is stirred vigorously at room temperature for ca. 10 minutes. MtBE (380 mL) is added and the resulting slurry is cooled to −10° C., where a 25% (w/w) MeOH solution of NaOMe (765 mmol) is added slowly via addition funnel at such a rate as to maintain an internal temperature of ca. −10° C. The resulting suspension is stirred vigorously under a N2 atmosphere as it is allowed to warm to 0° C. Solids are removed via filtration, rinsing with additional MtBE (50 mL). Solvent is removed in vacuo to provide the free base as a crude oil that is taken up in MtBE (600 mL). The mixture is cooled with vigorous agitation to ca. 0° C., where phenylacetic acid (765 mmol) is added slowly as a solution in MtBE (300 mL). The reaction mixture is stirred an additional 10 minutes after complete addition, during which time the product precipitates out of solution. The solids are collected via filtration, washed with additional MtBE (100 mL) and dried under vacuum at <40° C. to provide 3-amino-1-morpholin-4-yl-propan-1-one; compound with phenylacetic acid (191 g). This material is carried on to subsequent steps without further purification, or optionally, it can be re-precipitated from MtBE. MtBE (380 mL) is added the resulting slurry is cooled to −10° C. to maintain an internal temperature of ca. −10° C The resulting suspension is stirred vigorously under a N2 atmosphere as it to warm to 0° C Solids are removed via filtration rinsing with additional MtBE (50 mL) Solvent is removed in vacuo to provide the free base as a crude oil that The mixture is cooled with vigorous agitation to ca. 0° C. The reaction mixture is stirred an additional 10 minutes after complete addition during which time the product precipitates out of solution The solids are collected via filtration washed with additional MtBE (100 mL) dried under vacuum at <40° C.

反応条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

実験手順: A nitrogen inerted reactor, equipped with a suitable reflux condenser and soxhlet extractor containing freshly activated 3A molecular sieves (4-8 mesh; 97.2 g), is charged with 3-amino-1-morpholin-4-yl-propan-1-one, compound with phenylacetic acid (765 mmol) and 2-[2-(4-fluorophenyl)-2-oxo-1-phenyl-ethyl]-4-methyl-3-oxo-pentanoic acid phenylamide (450 mmol). THF (360 mL) is added, and the resulting solution is stirred vigorously as the reaction is heated at reflux temperature for ca. 24 hours, during which time the product begins to precipitate. Half-saturated aqueous NaHCO3 (100 mL) is added, and the reaction mixture is cooled with continued stirring to ca. 0° C. MtBE (100 mL) is added, and the solids are collected via filtration. The solid is washed with distilled water (100 mL) and MtBE (2×100 mL), collected, and dried under vacuum at ≦50° C. to afford 5-(4-fluorophenyl)-2-isopropyl-1-(3-morpholin-4-yl-3-oxo-propyl)-4-phenyl-1H-pyrrole-3-carboxylic acid phenylamide as a white solid (194 g). This material is carried on to subsequent steps without further purification. A nitrogen inerted reactor, equipped with a suitable reflux condenser soxhlet extractor containing freshly is heated at reflux temperature for ca. 24 hours to precipitate Half-saturated aqueous NaHCO3 (100 mL) is added the reaction mixture is cooled with continued stirring to ca. 0° C MtBE (100 mL) is added the solids are collected via filtration The solid is washed with distilled water (100 mL) and MtBE (2×100 mL) collected dried under vacuum at ≦50° C.

反応条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

実験手順: A reactor is charged with 3-amino-1-morpholin-4-yl-propan-1-one; hydrochloride (765 mmol). MeOH (380 mL) is added, and the mixture is stirred vigorously at room temperature for ca. 10 minutes. MtBE (380 mL) is added and the resulting slurry is cooled to −10° C., where a 25% (w/w) MeOH solution of NaOMe (765 mmol) is added slowly via addition funnel at such a rate as to maintain an internal temperature of ca. −10° C. The resulting suspension is stirred vigorously under a N2 atmosphere as it is allowed to warm to 0° C. Solids are removed via filtration, rinsing with additional MtBE (50 mL). Solvent is removed in vacuo to provide the free base as a crude oil that is taken up in MtBE (600 mL). The mixture is cooled with vigorous agitation to ca. 0° C., where phenylacetic acid (765 mmol) is added slowly as a solution in MtBE (300 mL). The reaction mixture is stirred an additional 10 minutes after complete addition, during which time the product precipitates out of solution. The solids are collected via filtration, washed with additional MtBE (100 mL) and dried under vacuum at ≦40° C. to provide 3-amino-1-morpholin-4-yl-propan-1-one; compound with phenylacetic acid (191 g). This material is carried on to subsequent steps without further purification, or optionally, it can be re-precipitated from MtBE. MtBE (380 mL) is added the resulting slurry is cooled to −10° C. to maintain an internal temperature of ca. −10° C The resulting suspension is stirred vigorously under a N2 atmosphere as it to warm to 0° C Solids are removed via filtration rinsing with additional MtBE (50 mL) Solvent is removed in vacuo to provide the free base as a crude oil that The mixture is cooled with vigorous agitation to ca. 0° C. The reaction mixture is stirred an additional 10 minutes after complete addition during which time the product precipitates out of solution The solids are collected via filtration washed with additional MtBE (100 mL) dried under vacuum at ≦40° C.

反応条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

実験手順: A nitrogen inerted reactor, equipped with a suitable reflux condenser and soxhlet extractor containing freshly activated 3A molecular sieves (4-8 mesh; 97.2 g), is charged with 3-amino-1-morpholin-4-yl-propan-1-one, compound with phenylacetic acid (765 mmol) and 2-[2-(4-fluorophenyl)-2-oxo-1-phenyl-ethyl]-4-methyl-3-oxo-pentanoic acid phenylamide (450 mmol). THF (360 mL) is added, and the resulting solution is stirred vigorously as the reaction is heated at reflux temperature for ca. 24 hours, during which time the product begins to precipitate. Half-saturated aqueous NaHCO3 (100 mL) is added, and the reaction mixture is cooled with continued stirring to ca. 0° C. MtBE (100 mL) is added, and the solids are collected via filtration. The solid is washed with distilled water (100 mL) and MtBE (2×100 mL), collected, and dried under vacuum at <50° C. to afford 5-(4-fluorophenyl)-2-isopropyl-1-(3-morpholin-4-yl-3-oxo-propyl)-4-phenyl-1H-pyrrole-3-carboxylic acid phenylamide as a white solid (194 g). This material is carried on to subsequent steps without further purification. A nitrogen inerted reactor, equipped with a suitable reflux condenser soxhlet extractor containing freshly is heated at reflux temperature for ca. 24 hours to precipitate Half-saturated aqueous NaHCO3 (100 mL) is added the reaction mixture is cooled with continued stirring to ca. 0° C MtBE (100 mL) is added the solids are collected via filtration The solid is washed with distilled water (100 mL) and MtBE (2×100 mL) collected dried under vacuum at <50° C.

反応条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

実験手順: A reactor is charged with 3-amino-1-morpholin-4-yl-propan-1-one; hydrochloride (765 mmol). MeOH (380 mL) is added, and the mixture is stirred vigorously at room temperature for ca. 10 minutes. MtBE (380 mL) is added and the resulting slurry is cooled to −10° C., where a 25% (w/w) MeOH solution of NaOMe (765 mmol) is added slowly via addition funnel at such a rate as to maintain an internal temperature of ca. −10° C. The resulting suspension is stirred vigorously under a N2 atmosphere as it is allowed to warm to 0° C. Solids are removed via filtration, rinsing with additional MtBE (50 mL). Solvent is removed in vacuo to provide the free base as a crude oil that is taken up in MtBE (600 mL). The mixture is cooled with vigorous agitation to ca. 0° C., where phenylacetic acid (765 mmol) is added slowly as a solution in MtBE (300 mL). The reaction mixture is stirred an additional 10 minutes after complete addition, during which time the product precipitates out of solution. The solids are collected via filtration, washed with additional MtBE (100 mL) and dried under vacuum at ≦40° C. to provide 3-amino-1-morpholin-4-yl-propan-1-one; compound with phenylacetic acid (191 g). This material is carried on to subsequent steps without further purification, or optionally, it can be re-precipitated from MtBE. MtBE (380 mL) is added the resulting slurry is cooled to −10° C. to maintain an internal temperature of ca. −10° C The resulting suspension is stirred vigorously under a N2 atmosphere as it to warm to 0° C Solids are removed via filtration rinsing with additional MtBE (50 mL) Solvent is removed in vacuo to provide the free base as a crude oil that The mixture is cooled with vigorous agitation to ca. 0° C. The reaction mixture is stirred an additional 10 minutes after complete addition during which time the product precipitates out of solution The solids are collected via filtration washed with additional MtBE (100 mL) dried under vacuum at ≦40° C.

反応条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

実験手順: A reactor is charged with 3-amino-1-morpholin-4-yl-propan-1-one; hydrochloride (765 mmol). MeOH (380 mL) is added, and the mixture is stirred vigorously at room temperature for ca. 10 minutes. MtBE (380 mL) is added and the resulting slurry is cooled to −10° C., where a 25% (w/w) MeOH solution of NaOMe (765 mmol) is added slowly via addition funnel at such a rate as to maintain an internal temperature of ca. −10° C. The resulting suspension is stirred vigorously under a N2 atmosphere as it is allowed to warm to 0° C. Solids are removed via filtration, rinsing with additional MtBE (50 mL). Solvent is removed in vacuo to provide the free base as a crude oil that is taken up in MtBE (600 mL). The mixture is cooled with vigorous agitation to ca. 0° C., where phenylacetic acid (765 mmol) is added slowly as a solution in MtBE (300 mL). The reaction mixture is stirred an additional 10 minutes after complete addition, during which time the product precipitates out of solution. The solids are collected via filtration, washed with additional MtBE (100 mL) and dried under vacuum at ≦40° C. to provide 3-amino-1-morpholin-4-yl-propan-1-one; compound with phenylacetic acid (191 g). This material is carried on to subsequent steps without further purification, or optionally, it can be re-precipitated from MtBE. MtBE (380 mL) is added the resulting slurry is cooled to −10° C. to maintain an internal temperature of ca. −10° C The resulting suspension is stirred vigorously under a N2 atmosphere as it to warm to 0° C Solids are removed via filtration rinsing with additional MtBE (50 mL) Solvent is removed in vacuo to provide the free base as a crude oil that The mixture is cooled with vigorous agitation to ca. 0° C. The reaction mixture is stirred an additional 10 minutes after complete addition during which time the product precipitates out of solution The solids are collected via filtration washed with additional MtBE (100 mL) dried under vacuum at ≦40° C.

反応条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

実験手順: A nitrogen inerted reactor, equipped with a suitable reflux condenser and soxhlet extractor containing freshly activated 3A molecular sieves (4-8 mesh; 97.2 g), is charged with 3-amino-1-morpholin-4-yl-propan-1-one, compound with phenylacetic acid (765 mmol) and 2-[2-(4-fluorophenyl)-2-oxo-1-phenyl-ethyl]-4-methyl-3-oxo-pentanoic acid phenylamide (450 mmol). THF (360 mL) is added, and the resulting solution is stirred vigorously as the reaction is heated at reflux temperature for ca. 24 hours, during which time the product begins to precipitate. Half-saturated aqueous NaHCO3 (100 mL) is added, and the reaction mixture is cooled with continued stirring to ca. 0° C. MtBE (100 mL) is added, and the solids are collected via filtration. The solid is washed with distilled water (100 mL) and MtBE (2×100 mL), collected, and dried under vacuum at ≦50° C. to afford 5-(4-fluorophenyl)-2-isopropyl-1-(3-morpholin-4-yl-3-oxo-propyl)-4-phenyl-1H-pyrrole-3-carboxylic acid phenylamide as a white solid (194 g). This material is carried on to subsequent steps without further purification. A nitrogen inerted reactor, equipped with a suitable reflux condenser soxhlet extractor containing freshly is heated at reflux temperature for ca. 24 hours to precipitate Half-saturated aqueous NaHCO3 (100 mL) is added the reaction mixture is cooled with continued stirring to ca. 0° C MtBE (100 mL) is added the solids are collected via filtration The solid is washed with distilled water (100 mL) and MtBE (2×100 mL) collected dried under vacuum at ≦50° C.

反応条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

実験手順: A reactor is charged with 3-amino-1-morpholin-4-yl-propan-1-one; hydrochloride (765 mmol). MeOH (380 mL) is added, and the mixture is stirred vigorously at room temperature for ca. 10 minutes. MtBE (380 mL) is added and the resulting slurry is cooled to −10° C., where a 25% (w/w) MeOH solution of NaOMe (765 mmol) is added slowly via addition funnel at such a rate as to maintain an internal temperature of ca. −10° C. The resulting suspension is stirred vigorously under a N2 atmosphere as it is allowed to warm to 0° C. Solids are removed via filtration, rinsing with additional MtBE (50 mL). Solvent is removed in vacuo to provide the free base as a crude oil that is taken up in MtBE (600 mL). The mixture is cooled with vigorous agitation to ca. 0° C., where phenylacetic acid (765 mmol) is added slowly as a solution in MtBE (300 mL). The reaction mixture is stirred an additional 10 minutes after complete addition, during which time the product precipitates out of solution. The solids are collected via filtration, washed with additional MtBE (100 mL) and dried under vacuum at ≦40° C. to provide 3-amino-1-morpholin-4-yl-propan-1-one; compound with phenylacetic acid (191 g). This material is carried on to subsequent steps without further purification, or optionally, it can be re-precipitated from MtBE. MtBE (380 mL) is added the resulting slurry is cooled to −10° C. to maintain an internal temperature of ca. −10° C The resulting suspension is stirred vigorously under a N2 atmosphere as it to warm to 0° C Solids are removed via filtration rinsing with additional MtBE (50 mL) Solvent is removed in vacuo to provide the free base as a crude oil that The mixture is cooled with vigorous agitation to ca. 0° C. The reaction mixture is stirred an additional 10 minutes after complete addition during which time the product precipitates out of solution The solids are collected via filtration washed with additional MtBE (100 mL) dried under vacuum at ≦40° C.

反応条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

実験手順: A reactor is charged with 3-amino-1-morpholin-4-yl-propan-1-one; hydrochloride (765 mmol). MeOH (380 mL) is added, and the mixture is stirred vigorously at room temperature for ca. 10 minutes. MtBE (380 mL) is added and the resulting slurry is cooled to −10° C., where a 25% (w/w) MeOH solution of NaOMe (765 mmol) is added slowly via addition funnel at such a rate as to maintain an internal temperature of ca. −10° C. The resulting suspension is stirred vigorously under a N2 atmosphere as it is allowed to warm to 0° C. Solids are removed via filtration, rinsing with additional MtBE (50 mL). Solvent is removed in vacuo to provide the free base as a crude oil that is taken up in MtBE (600 mL). The mixture is cooled with vigorous agitation to ca. 0° C., where phenylacetic acid (765 mmol) is added slowly as a solution in MtBE (300 mL). The reaction mixture is stirred an additional 10 minutes after complete addition, during which time the product precipitates out of solution. The solids are collected via filtration, washed with additional MtBE (100 mL) and dried under vacuum at ≦40° C. to provide 3-amino-1-morpholin-4-yl-propan-1-one; compound with phenylacetic acid (191 g). This material is carried on to subsequent steps without further purification, or optionally, it can be re-precipitated from MtBE. MtBE (380 mL) is added the resulting slurry is cooled to −10° C. to maintain an internal temperature of ca. −10° C The resulting suspension is stirred vigorously under a N2 atmosphere as it to warm to 0° C Solids are removed via filtration rinsing with additional MtBE (50 mL) Solvent is removed in vacuo to provide the free base as a crude oil that The mixture is cooled with vigorous agitation to ca. 0° C. The reaction mixture is stirred an additional 10 minutes after complete addition during which time the product precipitates out of solution The solids are collected via filtration washed with additional MtBE (100 mL) dried under vacuum at ≦40° C.

反応条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

実験手順: A nitrogen inerted reactor, equipped with a suitable reflux condenser and soxhlet extractor containing freshly activated 3A molecular sieves (4–8 mesh; 97.2 g), is charged with 3-amino-1-morpholin-4-yl-propan-1-one, compound with phenylacetic acid (765 mmol) and 2-[2-(4-fluorophenyl)-2-oxo-1-phenyl-ethyl]-4-methyl-3-oxo-pentanoic acid phenylamide (450 mmol). THF (360 mL) is added, and the resulting solution is stirred vigorously as the reaction is heated at reflux temperature for ca. 24 hours, during which time the product begins to precipitate. Half-saturated aqueous NaHCO3 (100 mL) is added, and the reaction mixture is cooled with continued stirring to ca. 0° C. MtBE (100 mL) is added, and the solids are collected via filtration. The solid is washed with distilled water (100 mL) and MtBE (2×100 mL), collected, and dried under vacuum at <50° C. to afford 5-(4-fluorophenyl)-2-isopropyl-1-(3-morpholin-4-yl-3-oxo-propyl)-4-phenyl-1H-pyrrole-3-carboxylic acid phenylamide as a white solid (194 g). This material is carried on to subsequent steps without further purification. A nitrogen inerted reactor, equipped with a suitable reflux condenser soxhlet extractor containing freshly is heated at reflux temperature for ca. 24 hours to precipitate Half-saturated aqueous NaHCO3 (100 mL) is added the reaction mixture is cooled with continued stirring to ca. 0° C MtBE (100 mL) is added the solids are collected via filtration The solid is washed with distilled water (100 mL) and MtBE (2×100 mL) collected dried under vacuum at <50° C.

反応条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

実験手順: A nitrogen inerted reactor, equipped with a suitable reflux condenser and soxhlet extractor containing freshly activated 3A molecular sieves (4–8 mesh; 97.2 g), is charged with 3-amino-1-morpholin-4-yl-propan-1-one, compound with phenylacetic acid (765 mmol) and 2-[2-(4-fluorophenyl)-2-oxo-1-phenyl-ethyl]-4-methyl-3-oxo-pentanoic acid phenylamide (450 mmol). THF (360 mL) is added, and the resulting solution is stirred vigorously as the reaction is heated at reflux temperature for ca. 24 hours, during which time the product begins to precipitate. Half-saturated aqueous NaHCO3 (100 mL) is added, and the reaction mixture is cooled with continued stirring to ca. 0° C. MtBE (100 mL) is added, and the solids are collected via filtration. The solid is washed with distilled water (100 mL) and MtBE (2×100 mL), collected, and dried under vacuum at <50° C. to afford 5-(4-fluorophenyl)-2-isopropyl-1-(3-morpholin-4-yl-3-oxo-propyl)-4-phenyl-1H-pyrrole-3-carboxylic acid phenylamide as a white solid (194 g). This material is carried on to subsequent steps without further purification. A nitrogen inerted reactor, equipped with a suitable reflux condenser soxhlet extractor containing freshly is heated at reflux temperature for ca. 24 hours to precipitate Half-saturated aqueous NaHCO3 (100 mL) is added the reaction mixture is cooled with continued stirring to ca. 0° C MtBE (100 mL) is added the solids are collected via filtration The solid is washed with distilled water (100 mL) and MtBE (2×100 mL) collected dried under vacuum at <50° C.