ethyl (1S,2S)-2-(4-bromophenyl)cyclopropane-1-carboxylate

反応条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

実験手順: To a 1-neck, 1-L round bottom flask equipped with a magnetic stirrer was added 265 mL methyl tert-butyl ether. The flask was evacuated and flushed with nitrogen three times. 2,2′-Isopropylidenebis[(4R)-4-tert-butyl-2-oxazolidine] (2.39 g, 8.03 mmol) was added, followed by copper(I) tridluoromethanesulfonate benzene complex (4.49 g, 8.03 mmol). The green suspension was stirred at room temperature for about 2 hours and was then filtered. The filtrate was added to a 4-neck, 5-L, round bottom flask equipped with a mechanical stirrer, thermocouple, nitrogen bubbler, and addition funnel. Then, 4-bromostyrene (150 g, 0.803 mol) was added to this solution and the reaction was cooled to 0° C. via an ice/water bath. Ethyl diazoacetate (167 mL, 1.606 mol) was dissolved in 1675 mL of MTBE and the solution was evacuated/flushed with nitrogen three times. This solution was then added to an addition funnel and added dropwise to the reaction mixture. A slight exotherm was observed. The ethyl diazoacetate was allowed to add slowly over the weekend and the reaction slowly warmed to room temperature. The reaction was poured into a large extractor and diluted with 4 L MTBE. The organics were washed with 2×1 L 3% aq. ammonium hydroxide and 2 L brine, dried over anhydrous magnesium sulfate, filtered, and concentrated. The residue was dissolved in heptane and a small amount of dichloromethane, injected onto an ISCO 1500 g column prepacked in heptane. The column was eluted with 100% heptane over 1 column volume, 0-20% ethyl acetate/heptane over 6.5 column volumes, and held at 20% ethyl acetate/heptane over 8 column volumes. The product containing fractions were collected and concentrated to give 191 g (yield 88%) of the title compound. 1H NMR (500 MHz, (CDCl3): 7.42 (d, 2H), 7.01 (d, 2H), 4.21 (q, 2H), 2.49 (m, 1H), 1.88 (m, 1H), 1.62 (m, 2H), 1.25 (t, 3H). The flask was evacuated flushed with nitrogen three times was then filtered The filtrate was added to a 4-neck, 5-L, round bottom flask equipped with a mechanical stirrer thermocouple, nitrogen bubbler, and addition funnel the reaction was cooled to 0° C. via an ice/water bath the solution was evacuated/flushed with nitrogen three times This solution was then added to an addition funnel added dropwise to the reaction mixture to add slowly over the weekend the reaction slowly warmed to room temperature The reaction was poured into a large extractor The organics were washed with 2×1 L 3% aq. ammonium hydroxide and 2 L brine dried over anhydrous magnesium sulfate filtered concentrated The residue was dissolved in heptane The column was eluted with 100% heptane over 1 column volume, 0-20% ethyl acetate/heptane over 6.5 column volumes The product containing fractions were collected concentrated

反応条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

実験手順: To a 1-neck, 1-L round bottom flask equipped with a magnetic stirrer was added 265 mL methyl tert-butyl ether. The flask was evacuated and flushed with nitrogen three times. 2,2′-Isopropylidenebis[(4R)-4-tert-butyl-2-oxazolidine] (2.39 g, 8.03 mmol) was added, followed by copper(I) trifluoromethanesulfonate benzene complex (4.49 g, 8.03 mmol). The green suspension was stirred at room temperature for about 2 hours and was then filtered. The filtrate was added to a 4-neck, 5-L, round bottom flask equipped with a mechanical stirrer, thermocouple, nitrogen bubbler, and addition funnel. Then, 4-bromostyrene (150 g, 0.803 mol) was added to this solution and the reaction was cooled to 0° C. via an ice/water bath. Ethyl diazoacetate (167 mL, 1.606 mol) was dissolved in 1675 mL of MTBE and the solution was evacuated/flushed with nitrogen three times. This solution was then added to an addition funnel and added dropwise to the reaction mixture. A slight exotherm was observed. The ethyl diazoacetate was allowed to add slowly over the weekend and the reaction slowly warmed to room temperature. The reaction was poured into a large extractor and diluted with 4 L MTBE. The organics were washed with 2×1 L 3% aq. ammonium hydroxide and 2 L brine, dried over anhydrous magnesium sulfate, filtered, and concentrated. The residue was dissolved in heptane and a small amount of dichloromethane, injected onto an ISCO 1500 g column prepacked in heptane. The column was eluted with 100% heptane over 1 column volume, 0-20% ethyl acetate/heptane over 6.5 column volumes, and held at 20% ethyl acetate/heptane over 8 column volumes. The product containing fractions were collected and concentrated to give 191 g (yield 88%) of the title compound. 1H NMR (500 MHz, (CDCl3): 7.42 (d, 2H), 7.01 (d, 2H), 4.21 (q, 2H), 2.49 (m, 1H), 1.88 (m, 1H), 1.62 (m, 2H), 1.25 (t, 3H). The flask was evacuated flushed with nitrogen three times was then filtered The filtrate was added to a 4-neck, 5-L, round bottom flask equipped with a mechanical stirrer thermocouple, nitrogen bubbler, and addition funnel the reaction was cooled to 0° C. via an ice/water bath the solution was evacuated/flushed with nitrogen three times This solution was then added to an addition funnel added dropwise to the reaction mixture to add slowly over the weekend the reaction slowly warmed to room temperature The reaction was poured into a large extractor The organics were washed with 2×1 L 3% aq. ammonium hydroxide and 2 L brine dried over anhydrous magnesium sulfate filtered concentrated The residue was dissolved in heptane The column was eluted with 100% heptane over 1 column volume, 0-20% ethyl acetate/heptane over 6.5 column volumes The product containing fractions were collected concentrated

反応条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

実験手順: To a 1-neck, 1-L round bottom flask equipped with a magnetic stirrer was added 265 mL methyl tert-butyl ether. The flask was evacuated and flushed with nitrogen three times. 2,2′-Isopropylidenebis[(4R)-4-tert-butyl-2-oxazolidine] (2.39 g, 8.03 mmol) was added, followed by copper(I) tridluoromethanesulfonate benzene complex (4.49 g, 8.03 mmol). The green suspension was stirred at room temperature for about 2 hours and was then filtered. The filtrate was added to a 4-neck, 5-L, round bottom flask equipped with a mechanical stirrer, thermocouple, nitrogen bubbler, and addition funnel. Then, 4-bromostyrene (150 g, 0.803 mol) was added to this solution and the reaction was cooled to 0° C. via an ice/water bath. Ethyl diazoacetate (167 mL, 1.606 mol) was dissolved in 1675 mL of MTBE and the solution was evacuated/flushed with nitrogen three times. This solution was then added to an addition funnel and added dropwise to the reaction mixture. A slight exotherm was observed. The ethyl diazoacetate was allowed to add slowly over the weekend and the reaction slowly warmed to room temperature. The reaction was poured into a large extractor and diluted with 4 L MTBE. The organics were washed with 2×1 L 3% aq. ammonium hydroxide and 2 L brine, dried over anhydrous magnesium sulfate, filtered, and concentrated. The residue was dissolved in heptane and a small amount of dichloromethane, injected onto an ISCO 1500 g column prepacked in heptane. The column was eluted with 100% heptane over 1 column volume, 0-20% ethyl acetate/heptane over 6.5 column volumes, and held at 20% ethyl acetate/heptane over 8 column volumes. The product containing fractions were collected and concentrated to give 191 g (yield 88%) of the title compound. 1H NMR (500 MHz, (CDCl3): 7.42 (d, 2H), 7.01 (d, 2H), 4.21 (q, 2H), 2.49 (m, 1H), 1.88 (m, 1H), 1.62 (m, 2H), 1.25 (t, 3H). The flask was evacuated flushed with nitrogen three times was then filtered The filtrate was added to a 4-neck, 5-L, round bottom flask equipped with a mechanical stirrer thermocouple, nitrogen bubbler, and addition funnel the reaction was cooled to 0° C. via an ice/water bath the solution was evacuated/flushed with nitrogen three times This solution was then added to an addition funnel added dropwise to the reaction mixture to add slowly over the weekend the reaction slowly warmed to room temperature The reaction was poured into a large extractor The organics were washed with 2×1 L 3% aq. ammonium hydroxide and 2 L brine dried over anhydrous magnesium sulfate filtered concentrated The residue was dissolved in heptane The column was eluted with 100% heptane over 1 column volume, 0-20% ethyl acetate/heptane over 6.5 column volumes The product containing fractions were collected concentrated