2,4,6-trichlorophenol

反応条件: temp:0.00; pressure:0.00; stir:

反応条件: temp:0.00; pressure:0.00; stir:

反応条件: temp:0.00; pressure:0.00; stir:

反応条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

実験手順: A stirred solution of methyl 5-chloro-2-nitro-benzoate (17.0 g, 0.079 mole) and the potassium salt of 2,4,6-trichlorophenol (18.6 g., 0.079 mole) in dimethyl sulfoxide (100 ml.) was heated at 90° C. for 17 hours. The cooled reaction mixture was diluted with water (500 ml.) and then extracted with ether (3×100 ml.). The combined ether fractions were washed with 10% sodium hydroxide solution (2×30 ml.) and then with a saturated aqueous sodium chloride solution. The ether solution was dried (Na2SO4) and the solvent evaporated to give a dark oil. Two crystallizations (petroleum ether) gave 1.91 g. of a pale yellow solid, m.p. 101°-103° C. The cooled reaction mixture extracted with ether (3×100 ml.) The combined ether fractions were washed with 10% sodium hydroxide solution (2×30 ml.) The ether solution was dried (Na2SO4) the solvent evaporated to give a dark oil Two crystallizations (petroleum ether) gave 1.91 g

反応条件: temp:60.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

実験手順: The product of Step C was added to a solution of NaOH (25 g) in water (75 mL), and the reaction mixture was vigorously stirred under a nitrogen atmosphere at 60° C. for 8 minutes. The reaction mixture was then added to ice (100 g), and aqueous 6 N HCl was added until a pH of 1 was reached. The solution was extracted with ethyl acetate (3×100 mL), and the combined organic extracts were dried over magnesium sulfate, filtered, and concentrated under reduced pressure. Dichloromethane (200 mL) was added to the resulting white solid, followed by the addition of oxalyl chloride (5 mL) and N,N-dimethylformamide (0.5 mL). The reaction mixture was stirred at room temperature for 2 hours, followed by the addition of 2,4,6-trichlorophenol (10.528 g, 53.32 mmol). After stirring overnight at room temperature, the reaction mixture was concentrated under reduced pressure. Methanol was added to the resulting residue, and a solid slowly precipitated from the solution. The solid was collected by filtration to provide 8.161 g (50.43%) of the title product as a solid. 1H NMR (CDCl3) δ 7.91 (s, 1H), 7.83 (d, 1H), 7.70 (d, 1H), 7.59 (t, 1H), 7.37 (s, 4H), 5.38 (s, 1H). was added until a pH of 1 The solution was extracted with ethyl acetate (3×100 mL) the combined organic extracts were dried over magnesium sulfate filtered concentrated under reduced pressure Dichloromethane (200 mL) was added to the resulting white solid followed by the addition of oxalyl chloride (5 mL) and N,N-dimethylformamide (0.5 mL) The reaction mixture was stirred at room temperature for 2 hours After stirring overnight at room temperature the reaction mixture was concentrated under reduced pressure Methanol was added to the resulting residue a solid slowly precipitated from the solution The solid was collected by filtration

反応条件: temp:70.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

実験手順: Malonic acid (5.27 g, 51 mmol), 2,4,6-trichlorophenol (20 g, 100 mmol) and phosphorus oxychloride (17.17 g, 112 mmol) were stirred under nitrogen atmosphere at reflux for 12 h. The reaction mixture was cooled to 70° C. and poured into ice water. The formed precipitate was collected, washed with water and dried under vacuum to provide the desired malonic acid bis-(2,4,6-trichloro-phenyl)ester as a white solid (23.37 g, quantitative yield). To a mixture of malonic acid bis-(2,4,6-trichloro-phenyl)ester (23.37 g, 50.5 mmol) and ethyl-3-aminocrotonate (6.38 mL, 50.5 mmol) under nitrogen atmosphere was added bromobenzene (5 mL). The reaction mixture was heated under reflux for 2.5 h then cooled to room temperature and diluted with ethyl acetate. The formed precipitate was filtered off, washed several times with ethyl acetate and dried under vacuum to afford the desired 4,6-dihydroxy-2-methyl-nicotinic acid ethyl ester as a yellow solid (13.04 g, quantitative yield). To a mixture of 4,6-dihydroxy-2-methyl-nicotinic acid ethyl ester (12.93 g, 65.57 mmol) in N,N-dimethylformamide (550 mL) and potassium carbonate (27.18 g, 196.71 mmol) under nitrogen atmosphere was added dropwise isopropyl iodide (19.65 mL, 196.71 mmol). The resulting slurry was vigorously stirred at room temperature overnight and then filtered to remove insoluble salts. The filtrate was diluted with water (300 mL) and extracted with ethyl acetate (4×400 mL). The combined organic layers were washed with brine, dried over sodium sulfate and evaporated to afford the desired 4,6-diisopropoxy-2-methyl-nicotinic acid ethyl ester as an oil which solidified on standing (15.24 g, 82.6%). To a solution of 4,6-diisopropoxy-2-methyl-nicotinic acid ethyl ester (15.24 g, 54.2 mmol) in methanol (70 mL) was added sodium hydroxide in water (70 mL). The reaction mixture was heated under reflux for 48 h. The solvent was removed under reduced pressure and concentrated hydrochloric acid was added (20 mL). The solvent was evaporated to provide the desired 4,6-diisopropoxy-2-methyl-nicotinic acid as a white salt (26.91 g, theoretical mass: 13.73 g). To a solution of 4,6-diisopropoxy-2-methyl-nicotinic acid salt (13.73 g, 54.2 mmol) in methylene chloride (160 mL) under nitrogen atmosphere was added oxalyl chloride (9.46 mL, 108.4 mmol) followed by N,N-dimethylformamide (1 mL). The reaction mixture was stirred overnight then the solvent was evaporated to obtain the desired crude acid chloride, which was used for the next step without further purification. To 50% v/v ammonia hydroxide (500 mL) at room temperature was added dropwise a solution of the crude 4,6-diisopropoxy-2-methyl-nicotinoyl chloride in methylene chloride (400 mL). The reaction mixture was stirred for 3.5 h. The solution was separated and the aqueous layer was extracted with methylene chloride (100 mL×8). The combined organic layers were dried over sodium sulfate and evaporated to afford a crude solid (6.94 g). The crude was purified by flash column chromatography to provide pure 4,6-diisopropoxy-2-methyl-nicotinamide as an orange solid (3.0 g, 21.9%). To a solution of 4,6-diisopropoxy-2-methyl-nicotinamide (0.3 g, 1.18 mmol) in THF (5 mL) under nitrogen was added 1.6 M n-BuLi solution in hexanes (3 mL, 4.75 mmol) at −20° C. The reaction mixture was allowed to warm-up to room temperature and left to stir for 2 h. The reaction was then cooled to −20° C. and a solution of 4-benzyloxy-3,5-dimethyl-benzonitrile in THF (5 mL) was added dropwise. The reaction mixture was allowed to warm to room temperature and was left to stir for 20 h. Water and acetic acid were added until pH˜5. The solution was heated to 55° C. for 3 h then cooled to room temperature, diluted with ethyl acetate, separated and the aqueous layer was extracted with ethyl acetate. The combined organic layers were washed with brine, dried over sodium sulfate and evaporated under reduced pressure to provide crude orange oil (1.02 g). The crude was purified by flash column chromatography to provide pure 7-(4-benzyloxy-3,5-dimethyl-phenyl)-2,4-diisopropoxy-6H[1,6]naphthyridin-5-one as a yellow solid (0.10 g, 17.9%). To a solution of 7-(4-benzyloxy-3,5-dimethyl-phenyl)-2,4-diisopropoxy-[1,6]naphthyridin-5-ylamine (0.10 g, 0.21 mmol) in methanol (4 mL) was added palladium on charcoal catalyst (0.06 g, 0.54 mmol). The reaction mixture was stirred under 1 atmosphere pressure of hydrogen for 20 h and diluted with methanol and filtered through a Celite pad. The solvent was evaporated under reduced pressure to provide a crude solid (0.077 g) which was triturated with ether followed by methanol to afford the desired compound 7-(4-hydroxy-3,5-dimethylphenyl)-2,4-diisopropoxy-1,6-naphthyridin-5(6H)-one (35 mg, 43.2%). Selected data: MS (ES) m/z: 383.08; MP 206-208° C. at reflux for 12 h The formed precipitate was collected washed with water dried under vacuum

反応条件: temp:70.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

実験手順: A mixture of malonic acid (20 g, 192 mmol), 2,4,6-trichlorophenol (72 g, 365 mmol), and phosphorus oxychloride (38 mL, 403.2 mmol) was stirred at reflux for 12 h. The reaction mixture was cooled to 70° C. and poured into ice water. The solid was collected by filtration, washed with water, and dried to give malonic acid bis-(2,4,6-trichloro-phenyl)ester (85 g, 95%). A solution of malonic acid bis-(2,4,6-trichloro-phenyl)ester (85 g, 184 mmol) and ethyl 3-aminocrotonate (26.08 g, 201.9 mmol) in bromobenzene (100 mL) was stirred at reflux for 50 min. The reaction mixture was cooled to 50° C. and diluted with EtOAc (260 mL). The solid was collected by filtration, washed with water, and dried to give 4,6-dihydroxy-2-methyl nicotinic acid ethyl ester (31 g, 86%). A solution of 4,6-dihydroxy-2-methyl nicotinic acid ethyl ester (31 g, 157 mmol) in phosphorus oxychloride (60 mL, 629 mmol) was stirred at reflux for 1.5 h. The extra phosphorus oxychloride was removed and the reaction mixture was poured into ice water. The solid was removed by filtration. The filtrate was extracted with dichloromethane (3×100 mL) and concentrated. The residue was further purified by column chromatography, to yield 4,6-dichloro-2-methyl nicotinic acid ethyl ester (16.9 g, 46%). A solution of 4,6-dichloro-2-methyl nicotinic acid ethyl ester (16.9 g, 71.3 mmol) in MeOH (60 mL) was mixed with sodium methoxide (58 mL, 256.68 mmol) and stirred at reflux for 12 h. The reaction was quenched by adding HOAc (50 mL). The mixture was diluted with water (200 mL), extracted with dichloromethane (3×100 mL), and concentrated. The residue was purified by column chromatography (SiO2, hexanes/EtOAc=6:1), to yield 4,6-dimethoxy-2-methyl nicotinic acid methyl ester (10 g, 67%). A solution of 4,6-dimethoxy-2-methyl nicotinic acid methyl ester (2.6 g, 12.3 mmol), lithium hydroxide (1.06 g, 44.08 mmol) in water (40 mL), MeOH (30 mL) and THF (20 mL) was stirred at reflux for 4 h. The reaction mixture was concentrated to dryness. The residue was mixed with HCl (conc., 20 mL) and was concentrated again on high vacuum to dryness to yield crude 4,6-dimethoxy-2-methyl nicotinic acid (quantitative yield). To a solution of 4,6-dimethoxy-2-methyl nicotinic acid (2.5 g, 12.0 mmol) in dichloromethane (50 mL) and THF (50 mL) at room temperature was added oxalyl chloride (2.57 mL, 29.4 mmol) and DMF (3 drops). The reaction mixture was stirred at room temperature for 0.5 h, concentrated to dryness using a rotary evaporator to afford crude 4,6-dimethoxy-2-methyl nicotinic acid chloride HCl salt (2.8 g, quantitative). A solution of 4,6-dimethoxy-2-methyl nicotinic acid chloride HCl salt (4.8 g, 23.5 mmol) in dichloromethane (100 mL) at room temperature was poured into a beaker of ammonium hydroxide (200 mL). The reaction mixture was stirred at room temperature for 1 h, extracted with dichloromethane (3×100 mL), and concentrated using a rotary evaporator to yield 4,6-dimethoxy-2-methyl-nicotinamide (2.4 g, 52%) as a light yellow solid. A solution of 4-hydroxy-3,5-dimethylbenzonitrile (2.00 g, 13.59 mmol) in DMF (20 mL) at room temperature was mixed with sodium hydride (0.706 g, 17.6 mmol) and stirred for 0.5 h. Benzyl bromide (1.62 mL, 13.59 mmol) was added and the reaction mixture was stirred at room temperature for 24 h. The reaction was quenched by adding water (200 mL), extracted with EtOAc (3×100 mL), and concentrated. The residue was purified by column chromatography to yield 4-benzyloxy-3,5-dimethylbenzonitrile (3.25 g, 100%) as a white solid. To a solution of 4,6-dimethoxy-2-methyl-nicotinamide (1 g, 5.1 mmol) in THF (120 mL) at −20° C. was added n-BuLi (9.6 mL, 15.3 mmol). The reaction was stirred at −20-0° C. for 2.5 h and then was cooled to −78° C. 4-Benzyloxy-3,5-dimethylbenzonitrile (1.21 g, 5.1 mmol) was added, the cooling bath was removed, and the reaction was allowed to warm up gradually to room temperature. After stirring at room temperature for 20 h the reaction was quenched by adding water (100 mL), extracted with dichloromethane (3×100 mL), and concentrated using a rotary evaporator. The residue was further purified by column (SiO2, Hexanes/EtOAc/MeOH=3:2:1) to yield 7-(4-benzyloxy-3,5-dimethyl-phenyl)-2,4-dimethoxy-[1,6]naphthyridin-5-ylamine (0.4 g, 19%) and 7-(4-benzyloxy-3,5-dimethyl-phenyl)-2,4-dimethoxy-6H-[1,6]naphthyridin-5-one (0.34 g, 16%). A solution of 7-(4-benzyloxy-3,5-dimethyl-phenyl)-2,4-dimethoxy-6H-[1,6]naphthyridin-5-one (0.34 g, 0.82 mmol) in DMF (100 mL) and MeOH (100 mL) was mixed with palladium/carbon (0.1 g) and subjected to hydrogenation (50 psi) for 2 h. The mixture was filtered through a Celite-pad. The filtrate was concentrated on high vacuum to afford 7-(4-hydroxy-3,5-dimethyl-phenyl)-2,4-dimethoxy-6H-[1,6]naphthyridin-5-one (0.23 g, 88%). A solution of 7-(4-hydroxy-3,5-dimethyl-phenyl)-2,4-dimethoxy-6H-[1,6]naphthyridin-5-one (0.23 g, 0.7 mmol) in MeOH (20 mL) and DCM (20 mL) was mixed with HCl in ether (7 mL, 7 mmol) and stirred for 0.5 h. The reaction was concentrated using a rotary evaporator to get a solid residue. The solid was rinsed with DCM, collected by filtration, washed with DCM to yield the HCl salt of 7-(4-hydroxy-3,5-dimethylphenyl)-2,4-dimethoxy-1,6-naphthyridin-5(6H)-one (0.15 g, 59%) as a light yellow solid. Selected data: MS (ES) m/z: 327.06; MP>324° C. at decomposition (HCl salt). at reflux for 12 h The solid was collected by filtration washed with water dried

反応条件: temp:70.01; pressure:0.00; stir:; See reaction.notes.procedure_details.

実験手順: A mixture of malonic acid (20 g, 192 mmol), 2,4,6-trichlorophenol (72 g, 365 mmol), and phosphorus oxychloride (38 mL, 403.2 mmol) was stirred at reflux for 12 h. The reaction mixture was cooled to 70° C. and poured into ice water. The solid was collected by filtration, washed with water, and air-dried to give malonic acid bis-(2,4,6-trichloro-phenyl)ester (85 g, 95%). A solution of malonic acid bis-(2,4,6-trichloro-phenyl)ester (85 g, 183.6 mmol) and ethyl 3-aminocrotonate (26.1 g, 202 mmol) in bromobenzene (100 mL) was stirred at reflux for 50 min. The reaction mixture was cooled to 50° C. and diluted with EtOAc (260 mL). The solid was collected by filtration, washed with water, and air-dried, to give 4,6-dihydroxy-2-methyl nicotinic acid ethyl ester (31 g, 86%). at reflux for 12 h The solid was collected by filtration washed with water air-dried

反応条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

実験手順: 2,4,6-trichlorophenol, 100.7 gm, was added to 250 ml of ethanol. 228.6 ml of a 25% solution of sodium methoxide (2 equivalents) in methanol was then added to the system. The system was stirred at room temperature for approximately 1 hour. Afterwards, 69.5 gm of bromoacetic acid was added and the system then heated to reflux. After 18 hours, an additional equivalent of sodium methoxide in methanol (114.3 ml) was added as well as 34.7 gm of bromoacetic acid. The system was continued at reflux for 12 hours. The reaction was then stopped and the solvent removed by stripping. The resulting solid was washed with water and then with ether. Concentrated HCl was next added to the solid and the system was left standing for 12 hours. Afterwards, the product was filtered, washed with water and air dried. Toluene was then added to the product. The toluene was removed by stripping and any remaining water was azeotroped off with the toluene. 74.4 gm of 2,4,6-trichlorophenoxyacetic acid was recovered. the system then heated to reflux After 18 hours at reflux for 12 hours the solvent removed by stripping The resulting solid was washed with water Concentrated HCl was next added to the solid the system was left standing for 12 hours Afterwards, the product was filtered washed with water and air dried Toluene was then added to the product The toluene was removed any remaining water was azeotroped off with the toluene 74.4 gm of 2,4,6-trichlorophenoxyacetic acid was recovered

反応条件: temp:0.00; pressure:0.00; stir:

反応条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

実験手順: 2,4,6-trichlorophenol, 100.7 gm, was added to 250 ml of ethanol. 228.6 ml of a 25% solution of sodium methoxide (2 equivalents) in methanol were then added to the system. The system was stirred at room temperature for approximately 1 hour. Afterwards, 69.5 gm of bromoacetic acid was added and the system then heated to reflux. After 18 hours, an additional equivalent of sodium methoxide in methanol (114.3 ml) was added as well as 34.7 gm of bromoacetic acid. The system was continued at reflux for 12 hours. The reaction was then stopped and the solvent removed by stripping. The resulting solid was washed with water and then with ether. Concentrated HCl was next added to the solid and the system was left standing for 12 hours. Afterwards, the product was filtered, washed with water and air dried. Toluene was then added to the product. The toluene was removed by stripping and any remaining water was azeotroped off with the toluene. 74.4 gm of 2,4,6-trichlorophenoxyacetic acid was recovered. the system then heated to reflux After 18 hours at reflux for 12 hours the solvent removed by stripping The resulting solid was washed with water Concentrated HCl was next added to the solid the system was left standing for 12 hours Afterwards, the product was filtered washed with water and air dried Toluene was then added to the product The toluene was removed any remaining water was azeotroped off with the toluene 74.4 gm of 2,4,6-trichlorophenoxyacetic acid was recovered

反応条件: temp:0.00; pressure:0.00; stir:; See reaction.notes.procedure_details.

実験手順: 1.0 M Diethyl zinc in hexanes (27.3 ml, 27.3 mmol) was added to a solution of 2,4,6-trichlorophenol (5.4 g, 27.3 mmol) in dichloromethane (100 ml) at −40° C. After stirring for 15 minutes, diiodo-methane (2.2 mL, 27.3 mmol) was added at −40° C. and stirred for an additional 15 minutes. 1-Bromo-3-vinyl-benzene (2.5 g, 13.7 mmol) was then added to the reaction mixture, allowed to warm to room temperature, and left stirring overnight. The reaction mixture was diluted with dichloromethane, washed with 1N HCl (2×), saturated sodium bicarbonate (2×), saturated sodium sulfite, 1N sodium hydroxide, and saturated brine, dried over magnesium sulfate, filtered and concentrated. GC-MS revealed that the reaction mixture contained 1-Bromo-3-cyclopropyl-benzene and 1-bromo-3-vinyl-benzene. To remove the bromo-3-vinyl-benzene, the crude mixture was reacted with potassium permanganate. A solution of potassium permanganate/water (1.5 g/20 mL) was added drop-wise to a solution of the crude mixture (˜3.5 g) in THF (40 mL) at 0° C. and then allowed to warm to room temperature. After 1 hour, the reaction was diluted with diethyl ether, washed with water and saturated brine, dried over anhydrous sodium sulfate filtered and concentrated. Purication by flash column chromatography eluted with 100 hexanes afforded 1-bromo-3-cyclopropyl-benzene (2.20 g, 81%). 1.6 M n-Butyllithium in hexanes (3.2 mL, 5.1 mmol) was added drop-wise to a solution of 1-bromo-3-cyclopropyl-benzene at −78° C. and stirred for 1 hour. This reaction mixture was then transferred via canula to a 250 mL round bottom flask equipped with a stirrer bar approximately ¼ full of solid carbon dioxide and stirred and for 1 hour. The reaction mixture was concentrated and then the residue was diluted with water. The aqueous layer was washed with dichloromethane (3×), acidified with 1 N HCl to pH˜2, and extracted with ethyl acetate. The organic phase was washed with water and saturated brine, dried over anhydrous sodium sulfate, filtered and concentrated to afford 3-cyclopropyl-benzoic (356 mg, 43%, white solid). 1H NMR (DMSO), δ (ppm): 12.90 (bs, 1H), 7.71 (d, 1H), 7.64 (s, 1H), 7.34 (m, 2H), 2.01 (m, 1H), 0.99 (m, 2H), 0.70 (m, 2H). stirred for an additional 15 minutes left stirring overnight washed with 1N HCl (2×), saturated sodium bicarbonate (2×), saturated sodium sulfite, 1N sodium hydroxide, and saturated brine dried over magnesium sulfate filtered concentrated To remove the bromo-3-vinyl-benzene the crude mixture was reacted with potassium permanganate to warm to room temperature After 1 hour washed with water and saturated brine dried over anhydrous sodium sulfate filtered concentrated Purication by flash column chromatography eluted with 100 hexanes